Abstract:Ultra-high performance concrete (UHPC) is well-known for its ultra-high compressive strength and sustained post-cracking tensile ductility, making it an attractive choice for the construction of modern structures. Prestressed UHPC members, however, often fail quickly after crack localization accompanied by reinforcement rupture, which shows limited failure warnings (i.e., relatively small ductility, nearly invisible cracking, and negligible compressive damage). On the other hand, UHPC members can also be designed to allow the gradual strain hardening of reinforcement to compensate for the load loss due to crack localization, and the final failure is attributed to gradual crushing of UHPC prior to reinforcement rupture. Failure after gradual strain hardening is desirable since it brings warning signs through high ductility, visible cracks, and controlled spalling. To achieve a resilient structural design of UHPC members, this study aims to develop design methods to avoid early failure after crack localization and promote failure after gradual strain hardening. This study first establishes a three-dimensional finite-element analysis (FEA) model to simulate the flexural behavior of prestressed UHPC beams, which is validated against seven existing experimental beams. Then, parametric analyses are conducted to assess the influence of five key aspects, including the steel rebar-to-prestressing strand ratio, the post-yield hardening of mild steel rebars, the pretensioned stress of prestressing strands, the tensile behavior of UHPC, and the web width to bottom flange ratio. Additionally, the authors propose a design method to predict the failure mode of prestressed UHPC beams, which can be used to guide the design of reinforcement configuration and to promote ductile structural behavior.

Experimental Studies and FEM Analysis of Seismic Behavior of Prestressed and Non- Prestressed High Performance Concrete Beams

Seismic Behavior of High Strength Concrete Beams

Experimental studies on HPC beams under low reversed cyclic loading

The Reversed Cyclic Load Tests of Normal and Pre-Stressed Concrete Beams

Seismic Performance of Nonprestressed and Prestressed HPC Frames under Low Reversed Cyclic Loading

Studies on two-story two-span HPC frames under low reversed cyclic loading

Test on Seismic Performance of Frame Structure of Steel Reinforced Concrete Beam and Steel-Tube Encased Concrete Column

Experimental study on seismic performance of PE fiber cementitious composite frame joints

Research on Nonlinear Behavior of Local High-Performance Concrete Beam–Column Connections

Seismic performance evaluation of precast post-tensioned high-performance concrete frame beam-column joint under cyclic loading

Performance of a prestressed efficiently prefabricated beam-column connection.

Bending resistance mechanism of prestressed ultra-high performance concrete - reinforced concrete beam based on a full-scale experiment

Experimental Investigation on Long Term Flexural Performance of Expansive Concrete Beams Eccentrically Reinforced by CFRP

Flexural Behavior of Steel-Mpc Based High Performance Concrete Composite Beams Subjected to Hogging Moments

Full-procedure Finite Element Analysis of Prestressed Concrete Beams Loaded

Stiffness Degradation Characteristics Destructive Testing and Finite-Element Analysis of Prestressed Concrete T-Beam

Ductility and Ultimate Capacity of Prestressed Steel Reinforced Concrete Beams

Experimental investigation on seismic performance of plain engineered cementitious composite beams

Hysteresis Relationship in Concrete Filled Steel Tubular Columns and Steel Beam Planar Frames

Flexural Behavior and Design of Prestressed Ultra-High Performance Concrete (UHPC) Beams: Failure Mode and Ductility

Experimental Study on Composite Steel- HSC Beams