Abstract:Condensed mode operation is an important advance in breaking through the heat transfer limitations of olefin polymerization in fluidized bed reactors (FBR). It is well known that gas-liquid-solid (G-L-S) and gas-solid (G-S) zones with temperature gradients exist within the FBR in condensed mode, but little is known about how these zones affect the polymer microstructure of fluidized particles. In this work, we report a class of model copolymers with propylene as the comonomer and evaluated this issue by varying the reactor temperature in time order and the consequent change in phase equilibrium, simulating the temperature switching of the particles between the G-L-S and G-S zones. Temperature switching in both zones resulted in wavy kinetic curves and enhanced polymerization kinetics as compared to the dry mode. The molecular weight of the polymer increases, and the MWD becomes narrower compared to the dry mode. MWD deconvolution results showed that two low molecular weight site types were eliminated in the condensed mode, and temperature switching appears to introduce a novel type of low molecular weight site. Moreover, temperature switching resulted in significantly lower insertion of comonomers regardless of whether it was in condensed mode or dry mode. This work not only elucidates the effects of complex hydrodynamics and temperature switching on polymer microstructure and active sites, but also demonstrates how model copolymers can be used extensively to develop polymer microstructure assessments at the industrial reactor scale.

Grade Transition Policy Research of Pre-polymerization of Styrene on Plant Scale

OPTIMAL GRADE TRANSITION IN CONTINUOUS POLYMERIZATION PROCESS

Study on Optimal Strategy of Grade Transition in Industrial Fluidized Bed Gas-Phase Polyethylene Production Process

Optimization of grade transition for high-density polyethylene continuous slurry process

A Heuristic Approach to Grade Transition Strategy of the HDPE Slurry Process in Different Operation Modes

Optimal Grade Transition of Polymerization Process with Path Constraints

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

The Capacity Expansion of Hypol Polypropylene Plant by Process Reconstruction

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Optimization of Grade Transition for Continuous Propylene Polymerization Process Using Continuous Stir Reactor in Series Technology

CFD Modeling of Styrene Polymerization in a CSTR

Modeling and Analysis of New Reactor Concepts for Poly(ethylene Terephthalate) Esterification Process

Review of Grade Transition in Continuous Polyolefin Production Process

Optimal Grade Transition for Polymerization Using a Novel Sequential Evolution Algorithm

A novel strategy for dynamic optimization of grade transition processes based on molecular weight distribution

ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process*

Optimal Grade Transition Based on Residence Time Distribution of Catalyst Particles in Bimodal Polyethylene Production Process

Dynamic simulation of grade transition for ethylene slurry polymerization process based on simultaneous approach

Customization of Particle Size Distribution in Continuous Polymerization Process

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Grade Transition Control Strategy for Propylene Polymerization with a Dual-Loop Reactor