Study on the Motor Control Center Based on DeviceNet

CHEN Bin,LIANG Chunyan,JIA Qing

DOI: https://doi.org/10.3969/j.issn.1004-1699.2001.02.006

2001-01-01

Abstract:The article expounds the technical problems and how to solve these problems when installing MCC and programming for the MCC.

What problem does this paper attempt to address?

The host-control system development of logistics control device based on PLC

Huang Dao

2006-01-01

Abstract:The logistics control system based on PLC and fieldbus technology is designed according to the logistic device.The conveyor belt speed of logistic devices is controlled by the inverter.The close-loop accurate position control of the mechanic-hand is achieved by use of the high-speed counter.The shortcomings of open-loop control for stepping motor are overcome.The host control system based on visual basic is developed.The detailed information about the programming methods for the PLC and host computer are given.
SMC Controller Based On DeviceNet

Shi Hongjun,Han Bing

DOI: https://doi.org/10.3969/j.issn.1007-757X.2011.08.008

2011-01-01

Abstract:The control alogrithm is usually PID in the DeviceNet ,but many objects is nonline, so the results of the PID alogrithm is not good.SMC is a robust control alogrithm, so SMC with the DeviceNet can get better results in the system.The experiment results demonstrate the SMC can control the motor better.
Application of WinCC and S7-300 to Test System in Electric Energy Return AC Drives

ZHOU Xiao-jun,LIU Hong-liang,HU Kang

DOI: https://doi.org/10.3969/j.issn.1671-7848.2010.05.024

2010-01-01

Abstract:To save energy and raise the development efficiency of mechanical test system,the 2 000 kW AC drives test system is designed by using electric energy return and vector control technology,and the control software is developed based on Siemens WinCC software and S7-300 series PLC instead of the traditional combination of board and programming.Communications between WinCC and PLC are designed with MPI protocol.Using configuration and script together,the parameters setting,the data displaying,the report generation,the users management and the fault information management are implemented.PLC communicates with field devices by Profibus-DP to real time control devices and collect test data.Application results show that the designed test system runs steadily and reliably.This solution plays a certain reference role in the development of mechanical test systems.
Networked Control System Design and Implementation

JM Zhang,SQ Wang

DOI: https://doi.org/10.1109/icmlc.2002.1174479

2002-01-01

Abstract:At present, the distribution of a control system based on a network is a "hot" research subject in the field of process control. This paper designs and implements a network-based process control system, which possesses functions such as remote control, clock synchronization, and a friendly man-machine interface. Simulation results over a university campus network confirm that the network-based control system is feasible and effective.
Analysis of cevicenet protocol for motor data object

Liu Yong,Liu Zongye,Tong Weiming

DOI: https://doi.org/10.3321/j.issn:0254-3087.2006.z3.266

2006-01-01

Abstract:Motor is the most important device in industry. On the base of introducing the basic characters and the device models of the protocol,this paper analyses the hierarchy of motor control devices and studies the motor data object. This paper could help the scientific researchers to develop the DeviceNet node.
Study on DeviceNet Communication Mechanism and Its Application in Protection Measurement and Control System

Weiming Tong,Zhongwei Li,Sun Fan-jin,Cheng Shu-kang

2007-01-01

Abstract:To fit in with the developing requirement of integrated functions of protection measurement, control and communication of protective relays, a protection measurement and control system based on DeviceNet fieldbus is designed. The communication mechanism of DeviceNet is studied and data trigger modes, communication connection, message types and other key technologies are analyzed. The object modeling and device description of the device are realized too. Results of network test, dynamic simulation and test in the field indicate that this system can accomplish all the communication tasks in real time and can make precise response to every kind of faults of the motor, transformer, line and capacitor. Moreover, this system has higher measurement precision and better control capability.
Intelligent Motor Control Centers: Defining the Benefits to Petroleum and Chemical Industries

Michael R. Bayer,Bill G. Stewart,Bruce K. Venne,David C. Mazur,John A. Kay

DOI: https://doi.org/10.1109/mias.2018.2875205

IF: 0.756

2019-09-01

IEEE Industry Applications Magazine

Abstract:As technology continues to drive innovations, petroleum and chemical enterprises must continue to keep pace to remain competitive in an ever-changing marketplace. The technology trend is to replace systems of yesterday with higher-performance, low-cost, and optionrich networked ones that provide a shorter return on investment and offer more flexibility. With the evolution of control system technology, systems migrate toward functions that are increasingly distributed to smarter, more granular control system components capable of performing localized operations. Most of these functions were once the responsibility of a central or master controller. Systems that integrate intelligent devices, device-level networks, and reporting software into mediumvoltage (MV) and low-voltage (LV) motor control centers (MCCs) are a prime example of where this trend is increasingly implemented. Technology can deliver improved diagnostics, early warnings used to increase system reliability, design flexibility, simplified and reduced wiring, and additional levels of protection for personnel safety in all process industries via the utilization of intelligent networks. This article focuses on the next steps of technology integration, intelligent devices, and device-level information collection over a single network that provides the convergence of control and information to optimize plant- and enterprise-wide processes and energy management.
Realization of Control System for Motorcycle AC Chassis Dynamometers Based on DeviceNet

Dou Dapeng,Gan Yongmei,Han Li,Wang Zhaoan

DOI: https://doi.org/10.3969/j.issn.1001-2095.2004.z1.067

2005-01-01

Abstract:According to the AC chassis dynamometer control request,the design scheme of the control system is presented.The structure and the function of the control system are introduced.How to design and realize the software on the PLC and computer is also introduced.
Application of Intelligent Technology in Electrical Engineering Automation Control

Hu Huiyong

DOI: https://doi.org/10.1088/1742-6596/1982/1/012093

2021-07-01

Journal of Physics: Conference Series

Abstract:Abstract Aiming at the problems of low control precision and complex control process in electrical engineering automation control, this paper proposes a kind of intelligent electrical engineering automation control technology based on DeviceNet. This paper focuses on the development process, communication protocol and object modeling method of DeviceNet universal I / O interface based on microprocessor. At the same time, this paper designs the application layer software, and gives the detailed hardware circuit and software design process. The experimental results show that the method can reduce the complexity of the control process and improve the control accuracy.

English Else
Development of CAD Platform for an Practical AC Speed-Adjusting System Based on Device Net

Z Wang,GH Er,C Yuan,DY Huo

DOI: https://doi.org/10.1109/wcica.2000.862468

2000-01-01

Abstract:The development of a CAD platform and its significance for future research are introduced. The platform is for research of a practical AC speed-adjusting system based on Device Net. Through monitoring the Device Manager which is developed by Rockwell Software, it can obtain the voltage, current etc. of the motor to be controlled, and this provides great convenience for future employment of a fuzzy neural network to estimate the rotor speed of the motor and implement a speed sensorless motor control
A Network Control System of Home Appliances Based on Embedded Techniques

GONG Chen,YING Teng-yun,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1002-6886.2007.05.018

2007-01-01

Abstract:Aimed at the need of network and intelligence of today's home electric equipments,a type of intelligence home appliances control system is invented,applying various techniques of wireless network.The system actualizes remote control,real-time monitor and other functions to home appliance,based on embedded techniques.This article introduces the design of the hardware and software of the system.
Motor Multi-Protection Test and Control Device Based on Device Net Field Bus

Dong-zhong ZHANG,Wei-ming TONG,Yong LIU,Hong-wei GAO

DOI: https://doi.org/10.3969/j.issn.1005-9490.2006.04.042

2006-01-01

Abstract:To increase the communication capability, real time response capability and signal processing capability, a motor multi-protection test and control device based on Device Net field bus and dual-CPU is designed. On the base of analyzing the data trigger modes, communication connection, message types and other key technologies of Device Net, the object modeling and device description of this device are realized. And this device has passed test in networking. The device has all the functions of protection, measurement, control and communication. The results of dynamic simulation and test in the field indicate that this device can make precise judgment to every kind of faults of the middle voltage motor of 35 kV or under 35 kV and has higher measurement precision and better controlling capability.
Devicenet fieldbus and symmetrical components method used in motor protection measurement and control device

Tong Weiming,Li Zhongwei,Sun Fanjin

DOI: https://doi.org/10.3321/j.issn:0254-3087.2006.z3.260

2006-01-01

Abstract:The motor protection measurement and control device based on DeviceNet fieldbus and symmetrical components method is developed. It has all functions of protection, alarm, measurement, control and DeviceNet communication. Communication mechanism of DeviceNet is studied and communication realized method of this device is offered. The object modeling and device description of this device are realized. Analysis and discuss of the problem of real application of symmetrical components about adopting same filtering sequence without considering system's grounding mode is made. The different filtering sequence formulas used in large or small grounding current system are presented separately.
Neural-Network-Based Predictive Control for PMSM Drives

Tong Yu,Lin Qiu,Xing Liu,Jien Ma,Youtong Fang

DOI: https://doi.org/10.1109/icpe59729.2023.10468930

2023-01-01

Abstract:Model predictive control (MPC) has gained increasing popularity in the control of motor drives and power converters. However, its control performance deteriorates when there is a mismatch in system parameters. This article introduces a novel neural-network-based predictive control (NNPC) architecture to address this issue. By means of a supervised learning mechanism based on the input-output data of the governed system, the established neural network can replace the original predictive model. In contrast to the standard MPC controller that uses constant parameters to predict future behaviors, the advantage of the proposed method lies in the fact that it can learn the non-linearity of the system and adapt to the parameter perturbations. Consequently, NNPC enhances robustness against parameter variations while maintaining the superior performance of the conventional MPC method. Finally, the proposed method is validated through comparative simulations on a surface-mounted permanent magnet synchronous motor.
Control and communication of a multi-motor system based on LAN

Suxiao Wang,Huailin Zhao,Jihong Zhu

DOI: https://doi.org/10.1109/ICIIBMS.2015.7439513

2015-01-01

Abstract:This paper establishes a multi-motor control system based on the local area network. It introduces the control strategy and the master-slave network structure. It analyzes both the advantage and disadvantage of the traditional communication modes RS-422 and CAN. And based on the analysis, the paper puts forward a full-duplex communication method which combines the advantages of both RS-422 and CAN to achieve the network control for the multi-motor system.
The Research and Development of DeviceNet Fieldbus Communication Interface for Slave Devices Based on Single-chip Microcomputer

Wang Xue,Gan Yongmei,Wang Zhaoan

DOI: https://doi.org/10.3969/j.issn.1000-3886.2005.02.018

2005-01-01

Abstract:Being a kind of low-level devices intereonnection techonology,DeviceNet has broad application in industrail field.This paper introduces the research and development of DeviceNet Fieldbus communication interface for slave devices based on single-chip microcomputer,the hardware circuit and software designing have been detailed.
Design of multi-motor drive platform system based on STC SCM

Shanshan Kang,Xiaoqiang Tang,Li Liu,Hao Tong,Zhufeng Shao,Gang Wu

DOI: https://doi.org/10.16791/j.cnki.sjg.2017.09.033

2017-01-01

Abstract:In view of the Manufacturing Engineering Comprehensive Practice course,a multi-motor drive platform system has been developed,which provides the assembly and test services for typical mechanical system models.The circuit of this platform partly uses the STC89C52 SCM(single chip microcontroller)to implement the control,including the voltage regulation,the filtering,the power amplification,etc.,which can realize the forward and backward rotation,speed regulation and stepping control of many DC motors and stepping motors,and has the infrared remote control function at the same time.This platform furnishes an open programming environment,which provides an extensible teaching experimental platform for the assembly and test in mechatronics teaching.
Design of DC motor controller based on MBD

Xu Hu,Peng Lu,Yan Yang,Chunpeng Pan,Guoguo Wu,Yan Ping

DOI: https://doi.org/10.1088/1742-6596/2125/1/012069

2021-11-01

Journal of Physics: Conference Series

Abstract:Abstract This paper designs a direct current (DC) motor controller based on Arduino and Simulink to solve the problems of poor openness, complicated programming and difficult signal detection of the existing teaching experimental equipment. The controller integrates the Model-Based Design (MBD) concept, involving single-chip microcomputer, system modeling, micromotor, automatic control and other technologies. The hardware system includes Arduino, encoder, driver, input/output and other interfaces. The software system uses Simulink as the software development platform of the experimental device. It has the functions of algorithm design, simulation, execution, real-time data observation, etc. The limiting incremental PID control algorithm is used to control the speed of the DC motor, and the experimental results verify the design requirements. The hardware and software systems have the characteristics of good openness, fast implementation, safe and reliable, low cost, can complete the verification and improvement of various algorithms such as motor control, and can meet the teaching and research needs of the training of new engineering and technology.
The Integrated Test and Detection Platform of Motor

XIE Da,ZHANG Yan-chi,MENG Fan-qing,JIANG Jian-min

2010-01-01

Abstract:This paper introduces the main structure of integrated test and detection platform of motor in general.From the three parts of electrical main circuit system,electrical control systems and measurement subsystems and the overall design of the test platform is described in detail,and monitoring and control objects design are analyzed.Platform uses multiple PLCs to distributed control combined with virtual instruments,through the industrial Ethernet links with the console,which not only can work relatively independent but also can run together,reducing the repair time of the failure of the equipment and increasing the efficiency of the equipment.The platform also has a comprehensive security protection system.System shows that the detection platform has a rational design and some perfect functions,so the platform has the good value of motor class education.
Study of an Integrative Motor Protector Based on Microcontroller

ZHANG Jie,HE Zhi-wei,CHEN Xian-ming,ZHANG Dong-jin,WANG Da-yong

DOI: https://doi.org/10.3969/j.issn.1673-6079.2006.03.011

2006-01-01

Abstract:This paper presents a microcomputer protector for low-voltage motor designed to satisfy the requirements of the intelligentized MCC. The microcomputer protector uses an ISP FLASH MCU as its kernel processor. The ISP FLASH MCU has high performance.The digital synthetic motor protector includes protection, measurement, communication and all.

Study on the Motor Control Center Based on DeviceNet

The host-control system development of logistics control device based on PLC

SMC Controller Based On DeviceNet

Application of WinCC and S7-300 to Test System in Electric Energy Return AC Drives

Networked Control System Design and Implementation

Analysis of cevicenet protocol for motor data object

Study on DeviceNet Communication Mechanism and Its Application in Protection Measurement and Control System

Intelligent Motor Control Centers: Defining the Benefits to Petroleum and Chemical Industries

Realization of Control System for Motorcycle AC Chassis Dynamometers Based on DeviceNet

Application of Intelligent Technology in Electrical Engineering Automation Control

Development of CAD Platform for an Practical AC Speed-Adjusting System Based on Device Net

A Network Control System of Home Appliances Based on Embedded Techniques

Motor Multi-Protection Test and Control Device Based on Device Net Field Bus

Devicenet fieldbus and symmetrical components method used in motor protection measurement and control device

Neural-Network-Based Predictive Control for PMSM Drives

Control and communication of a multi-motor system based on LAN

The Research and Development of DeviceNet Fieldbus Communication Interface for Slave Devices Based on Single-chip Microcomputer

Design of multi-motor drive platform system based on STC SCM

Design of DC motor controller based on MBD

The Integrated Test and Detection Platform of Motor

Study of an Integrative Motor Protector Based on Microcontroller