PLC Controlling in the Refigerant-stuffing Machine

杨东海,翁新华,胡波

DOI: https://doi.org/10.3969/j.issn.1000-3886.2003.03.025

2002-01-01

Abstract:This paper introduces the construction and working principle of the refrigerant-stuffing machine controlling system.It emphasizes the controlling way that the Siemens S7-200 PLC and touch panel is integrated,which makes the performance of the system much better.

What problem does this paper attempt to address?

Design of the PLC Controlling Imprinting Machine for Polymeric Microfluidic Chip

Yong He

2006-01-01

Abstract:The design of the imprinting machine for polymeric microfluidic chip was introduced.The imprinting machine can be heated and cooled by TEC,pressed by hydraulic pressure in a vacuum maintained by a pump.Realtime control between PC and PLC is realized through serial communication by freeport mode,and the control of temperature and pressure is realized by PLC.It is showed that the experimental results agree with the high quality and precision of the polymeric microfluidic chips made by this machine.
PLC Control System Design of Large Hydraulic Equipment

XU Xiaodong,GONG Guofang,LI Xilian,YANG Huayong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2008.03.049

2008-01-01

Abstract:PLC control system has been widely applied in industrial control for its excellent performance and high reliability,particularly in the sequential control process. Building steps of S7-300 PLC and programming/debugging process of software STEP7 were introduced with the project background of a large hydraulic equipment. Advantages such as simple design,convenient programming,reliable running and so on were indicated in the actual implementation of the PLC system.
The Application of S7- 200PLC in the Control of Pulverizer

肖杰,边绍辉,周泽魁

DOI: https://doi.org/10.3969/j.issn.1002-8110.2003.03.046

2003-01-01

Abstract:The application of S7 - 200PLC in the pulverizer control system is introduced in this paper with detailed explanation of hardware configuration and program design. The experience of solving some problems in the system is presented in addition. This system is one part of the beer saccharification process control system, which has been in good condition since early 2001 till now.
The Control System of a Magnetic Scattering Vacuum Three-target Film Coating Machine Realized by PLC

徐祖华,黄智伟,朱慧玲

DOI: https://doi.org/10.3969/j.issn.1000-3886.2004.02.018

2003-01-01

Abstract:With Mitsubishi PLC and Easy View touch screen , the control system of magnetic scattering vacuum three-target film coating machine can set parameters, control process-flow, give alarm and protection in case break-down occurs. This paper introduces the software and the hardware structures of the PLCcontrol system as well as the close-circuit control of the target unit, which aims at stabilizing target current.
The Auto Air - Condition Compressor Checking System Based on PLC - OP

张兴宁,周泽魁

DOI: https://doi.org/10.3969/j.issn.1006-2971.2004.06.006

2004-01-01

Abstract:To overcome the problems in the checking of auto air-condition compressor, such as uncontinuous process, long period, notable artifical effect and so on, we design an auto air-condition compressor checking system. This system, using SIEMENS SIMATIC S7-300 PLC and OP170B, can complete all checking items automatically. This paper presents the main characters of this system including equipments, control flow, hardware design and software programming. Practice has proved that this system can improve the checking rate remarkably and guarantee the checking accuracy so that it fulfills the design requirement.
Application of PLC in safety performance test of compressor

Hong-min WANG,Xing-ning ZHANG,Ze-kui ZHOU

DOI: https://doi.org/10.3969/j.issn.1673-193X.2008.06.025

2008-01-01

Abstract:This paper presented a self-design test system of auto air-condition compressor.The system,based on SIEMENS SIMATIC S7-300 PLC,could complete all testing items automatically.Its basic characteristics,equipments,control flow and PLC hardware and software design were introduced.Practice proved that this system can improve the testing rate remarkably.
Design & Experiment of PLC Control for Water Mist Fire-Extinguishing System

陈耿郎,邓东,周华

DOI: https://doi.org/10.3969/j.issn.1008-0813.2005.01.012

2005-01-01

Abstract:Principle and process of automatic control on water mist fire-extinguishing system created based on PLC are instructed in the paper. The experiment includes the research of the outfire effect of water mist system, temperature sampling-and-treating of the fire field during the burning and extinguishing is also completed. The result shows that system reacts quickly, the control process and action reach the requirement. One of the mechanics of water mist for putting out liquid combustible fire is the notable cooling effect of water mist.
Jigger Control System Based on PLC

Gangfeng Yan

2008-01-01

Abstract:Based on introducing the control principle of the jigger system,the analysis of control requirement for the system was achieved,and the control scheme was proposed.The construction of hardware platform based on programmable logic controller(PLC) was built.The control strategies about the velocity-tension transmission system and the temperature of dyeing liquor were presented.Furthermore,the development of the man-machine interface was considered.The experimental results show that the control system possesses the properties of proper design,highly integrated ability and stability.
Application of S7-300 PLC in Temperature Control System for Fractionating Tower

Xi Chen,Derui Zhao,Xiangye L(u)

DOI: https://doi.org/10.3969/j.issn.1000-0380.2011.03.012

2011-01-01

Abstract:Aiming at the features of the temperature system of fractionating tower,i.e.complex structure and high precision requirement,the temperature is controlled by adopting Siemens S7-300 programmable controller.The single parameter fuzzy PID modulation method is used in the control loop.In addition,the single parameter fuzzy PID control is combined with the logic judgment instruction in programmable controller,thus PID control becomes more flexible,and better meets the requirements of productive process.The result of practical operation verifies the feasibility and precision of using PLC in temperature control system of fractionating tower.
Design of Control System of Drying Pit Based on PLC

ZHANG Yang-hui,ZHANG Si-jian,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1002-6886.2007.04.005

2007-01-01

Abstract:A drying pit control system that was composed of the PLC applied system was introduced in the printworks.The design of the structure of hardware and software was discussed in detail.In this system,the online measuring and controlling of moisture was realized by the fuzzy PID algorithm.The application process indicated that the system was simple,highly reliable and highly automatic.The automation level is improved greatly in the printworks.
Alkalinity-concentration & Level Control System Based on PLC

WANG Shou-zhang,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.08.011

2007-01-01

Abstract:The alkalinity-concentration level control system in mercerizer of dyeing corporation was simply introduced.In order to innovate the existing system,an on-time inspection control system based on S7-200 PLC plus electrical valves and sensors was adopted.The system block diagram and PLC float diagram were briefly introduced.Practice proves that,the control scheme advances automation level of the system.
Control of a Food Vacuum Freeze Dryer Machine based on PLC

邱桐,徐光,李新秋

DOI: https://doi.org/10.3969/j.issn.0517-6611.2011.19.234

2011-01-01

Abstract:The structure of control system of a food vacuum freeze dryer was introduced.The realization scheme of the control system based on the application of PLC was put forward.A method of monitoring software on upper computer was set up.The system had the properties of high degree of automation and good stability.
Equipment of Pickles Machining Based on PLC

Min Zheng

2006-01-01

Food Science and Technology International

Abstract:According to the situation of simple and older pickles machining equipments in many middle small pickles machining corporation in ZheJiang, it is feasible to use PLC which is high reliable and anti-jamming, economic and easy maintaining in the equipment. The improving way of high temperature sterilization equipment in pickles machining is introduced in the paper. The control process of PLC and software flow is given in the paper. The measurements of anti-jamming are introduced also. It has a good market value.
Design of Control System on Polyethylene Valve Sealing and Torsion Testing Machine

Yanju Liu

2014-01-01

Abstract:Polyethylene valve testing machine is used to detect the sealing of the valve and operating torque of switching valve. On the basis of the analysis of the testing machine structure and working principle,the paper puts forward the control scheme based on PLC + HMI. The composition of control system,the selection of PLC,definition of I /O address,control flow and program design are also introduced. The paper realizes precise and reliable control of testing machine with PLC rich software and hardware resources and HMI a good human-computer interaction function. Field application shows that the control system of testing machine is easy to operate and the movement is reliable,and can meet the demands of the user.
Study and Development of Automatic Control System for Chamfering Machine Based on PLC

WU Yan-ming,WU Bin,ZANG Fu-hai,ZHU Jia-cheng,WU Tian-xing

DOI: https://doi.org/10.3969/j.issn.1001-2265.2011.12.017

2011-01-01

Abstract:Influenced by scaling?off cutting, to the mass produced rods and steel tube blank, the phenomena of burr and flashing are found. If the parts are processed by manual chamfering and lathe, it is tremendously labor intensive and low efficiency. To solve the problem, an efficient double?headed automatic chamfering machine was designed based on PLC control. The structural components of the chamfering machine were introduced , the gas?liquid control diagram and the electric control schematic figure including the flow chart of software programming were described in detail. The practices have proven productivity and end quality are improved greatly be?cause the chamfering machine can be used to realize double end continuous processing although loading once.
The Application of Siemens S7-200 PLC Based on Waste Automatic Test System

Yang Yan,Yang Wei-ping,Wang Xin

DOI: https://doi.org/10.4028/www.scientific.net/amr.510.524

2012-01-01

Advanced Materials Research

Abstract:This paper with Siemens S7-200 PLC as core controller, has realized automatic transmission device of waste automatic test. The system hardware, software design are described, and using WinCC Flexible configuration software on human-computer interface configuration, to achieve the production line equipment real time control and status monitoring. Finally, the summary of the thesis, and put forward some further research prospect.
The Design of the Control System of the Automatic Packaging Machine

Zhao Ya

Abstract:The mechanical structure and the control requirement of the automatic packagingmachine ale introduced By analyzing the working principle and working process of thernechanisms,he total control scheme is determined; the number and property of thecontrolled object's I /0 are clarified; the selection of PLC and its extension module arecompleted For the temperature control pert,the Mitsubishi's analog input extension module FX2N-4AD is used to collect the temperature signal of the thermocouples For the Servosystem pert,motor speed is controlled by the output pulse of PLC So the control systembased on PLC ofthe automatic packaging machine is completed

Engineering
Design of Control System on Spraying of Anti-freezing Agents with PLC

ZHOU Wei,NIU Zhi-gang,LI Yuan-zong

DOI: https://doi.org/10.3969/j.issn.1003-0794.2009.01.014

2009-01-01

Abstract:The control system based on the Siemens S7-200 series PLC was introduced.The system was designed for the spraying of anti-freezing agents.The composing and function of the system,hardware arrangement and software development were discussed.This system had been applied successfully in practice,and proved to be reliable and applicable.
Design of the control system of the subway ticket vending machine based on PLC

Wu Dong,Lan Jie-Ying

DOI: https://doi.org/10.1145/3436286.3436426

2020-04-28

Abstract:This design combines PLC, sensors, configuration software to design and implement the hardware and software of traditional automatic fire alarm and fire-fighting systems, to improve the reliability of the system. First, the composition of the automatic fire alarm and fire protection system is described. Second, after fully understanding the design requirements of the system, the main control equipment of the automatic fire alarm and fire protection system adopts PLC, the PLC is selected, and finally the Siemens S7-300 PLC is selected. The sensor selects PT100 temperature sensor and JTY-GD-G3 scattered light type photoelectric smoke sensor; finally, use the TIA configuration monitoring software to write the automatic fire alarm and the host computer monitoring software and PLC program of the fire-fighting system to complete the software function and humancomputer interaction the design of the interface.
Design of Heat-Exchanging Station Control System Based on PLC and HMI

张华强,高蕾,孟凡刚

DOI: https://doi.org/10.3969/j.issn.1001-182X.2006.09.025

2006-01-01

Abstract:In order to resolve the questions of low efficiency and high consume for heat-exchanging station control system,the scheme of constant temperature constant press control system for heat-exchanging station by applying Programmable Logic Controller (PLC),converter and Human-Machine Interface (HMI) is proposed.Its system configuration,operating principles and frequency control scheme are detailed introduced.This system has some special characteristic of simplicity of operator,high-running speed,high-automated level and high reliability etc.

PLC Controlling in the Refigerant-stuffing Machine

Design of the PLC Controlling Imprinting Machine for Polymeric Microfluidic Chip

PLC Control System Design of Large Hydraulic Equipment

The Application of S7- 200PLC in the Control of Pulverizer

The Control System of a Magnetic Scattering Vacuum Three-target Film Coating Machine Realized by PLC

The Auto Air - Condition Compressor Checking System Based on PLC - OP

Application of PLC in safety performance test of compressor

Design & Experiment of PLC Control for Water Mist Fire-Extinguishing System

Jigger Control System Based on PLC

Application of S7-300 PLC in Temperature Control System for Fractionating Tower

Design of Control System of Drying Pit Based on PLC

Alkalinity-concentration & Level Control System Based on PLC

Control of a Food Vacuum Freeze Dryer Machine based on PLC

Equipment of Pickles Machining Based on PLC

Design of Control System on Polyethylene Valve Sealing and Torsion Testing Machine

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

The Application of Siemens S7-200 PLC Based on Waste Automatic Test System

The Design of the Control System of the Automatic Packaging Machine

Design of Control System on Spraying of Anti-freezing Agents with PLC

Design of the control system of the subway ticket vending machine based on PLC

Design of Heat-Exchanging Station Control System Based on PLC and HMI