Research of Low Power Consumption Intelligent Heat Meter

陈伟,朱善安

DOI: https://doi.org/10.3969/j.issn.1001-4551.2001.05.061

2001-01-01

Abstract:This paper reported that the measurement principles of liquid volume and temperature of Heat Meter. Meanwhile, I do some researches of the design of the hardware and software of Low Power Consumption Intelligent Heat Meter by using the MSP430 single chip microcomputer.

What problem does this paper attempt to address?

Design of Intelligent and Low-Power for Vortex Flow-Meter

HU Hai-qing,CHEN Zhang-wei

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.11.011

2006-01-01

Abstract:A kind of intelligent and low-power for vortex flow-meter was designed,based on the low-power(consumption) chip-MSP430F149,it has the LCD module and RS485 communication interface.The 4-20mA standard electric current output was implemented,the measurement and display of instantaneous flux and integrated flux were also implemented.
An Intelligent Transmitter of Variable-area Flow-meter Based on MSP430

LIU Ying,CHEN Zhang-wei

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.06.010

2005-01-01

Abstract:This paper introduces a flow-meter with MSP430F449 CMOS chip produced by TI company. It can finish local measurement of flow, calculate the sum volume and display at the field. Electricity remote transmit means so far as the needle of the indicator pointed out the value, the flow-meter change the value into standard electric current signals of 4~20mA or 0~10mA accurately.
Research and Development of Heat Meter Featuring High Precision and Ultra-Low Power Consumption

Keqiang Duan,Tao Yuan

DOI: https://doi.org/10.3969/j.issn.1000-0380.2006.02.006

2006-01-01

Abstract:The high precision heat meter based on MSP430 microprocessor is designed by establishing the mathematics model and selecting the enthalpy value in data processing algorithm.For system hardware,the selection and application of single chip computer MSP430,temperature transducer and flow transducer are described in detail.For system software,six modules are composed.In order to reduce the power consumption,the running time of CPU is minimized,and by using various operating modes of MSP430,power supply from I/O port to modules are switched and controlled reasonably.Thus the heat meter designed features compact,low power consumption,high accuracy.It supports USB communication and its data is transmitted by M-bus.The new thought is provided for heat meter.
Design and Implementation of Low Power Nonmagnetic Heat Meter Based on MCU MSP430

唐美芹,赵辉,刘伟佳

DOI: https://doi.org/10.3969/j.issn.1001-9944.2009.12.003

2009-01-01

Abstract:In this paper,the hardware composition and software design and test conclusion of low power nonmagnetic heat meter based on MCU MSP430FW42x are introduced.Selection of low power single-chip microcomputer MSP430FW42x as a master chip reduces system power consumption.The design of low power nonmagnetic heat meter,which is an application of LC flow sensor and low power MCU MSP430FW42x within the rotating scanning module SCANIF to measure the flow,avoiding the interference caused by magnetic field.And the system selects MCU MSP430FW42x within 16-bit Comparator module and platinum thermistor for measuring the temperature,which replaces the AD chips external and saving the cost.It communicates with the remote billing system through M-Bus interface.Test conclusion shows the heat meter have characteristics of high measurement precision,high anti-interference power,low consumed power,meanwhile the cost is greatly reduced.
Design and Implementation of Artificial Intelligent Heat Meter with Ultra-Low Power Consumption

Yan Liu

2008-01-01

Abstract:The design of a new style intelligent heat meter with its software and hardware is proposed.The MSP430F425 is used as control MCU,Pt1000 for temperature measurement and the new measurement for volume flow is recommended,which improve the precision and sensitivity of flow measurement.The output interface is designed for remote transmission and record of data.To realize low power of the whole system,the software and hardware are specially designed.
Research and Development of IC Card Gas Meter with Low Power Consumption

Wei WANG,Liang FENG

DOI: https://doi.org/10.3969/j.issn.1000-4416.2006.04.009

2006-01-01

Abstract:The design of IC card gas meter with low power consumption based on MSP430 micro-controller unit is put forward,and the hardware design of the meter,the circuit composition of the electric control system and the design of system software are discussed.In order to effectively reduce the power consumption,the electron parts are composed of low voltage,low frequency and low static power consumption components.In the design of system software,special attentions are paid to the low power consumption,information safety, anti-interference and reliability.The total system is characterized by low power consumption,stable and reliable running,convenient operation,and strong anti-interference capacity.
Design of Intelligent Heat Meter and Temperature Control Integrated System Based on MSP430

Qingxin ZHANG,Zhijun CHEN,Xueqin YAN

DOI: https://doi.org/10.13568/j.cnki.651094.2017.01.022

2017-01-01

Abstract:This paper introduces a intelligent control system which can survey the heat energy,demonstrate and control the room temperature.Based on the low-power chip,MSP430F249,the system can precisely survey the quantity that heat energy release by surveying the flow velocity of fluid with the time difference when ultrasonic spread in fluid with the help of high-precision time-digital converter chip,TDC-GP22,as well as the temperature difference of fluid loop with the help of platinum resistance temperature sensor PT1000.It also collects the room temperature and demonstrates it simultaneously,accepts the set commands from users and controls the start data of thermostat valve voluntarily so as to achieve the function of intelligent temperature control.The test result indicates that this system is of low overall-power loss,high accuracy for measuring and precise controlled temperature.
Design of the Circuit Control System for Intelligent Card Heat Meter Based on MSP430 Microcontroller

昝元峰,王树众

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.03.001

2004-01-01

Abstract:Based on the MSP430 Microcontroller,the design of circuit control system for Intelligent Card Heat Meter is propsed,in which the control mode of IRQ is adopted..In order to effectively reduce the power consumption, the electron parts in the circuit control system are composed of low voltage, low frequency, low static power consumption CMOS components. Meanwhile, in the design of corresponding system software special attentions were paid to the low-power consumption, information safety, anti-disturbance and reliability.
Low-power Consumption Principle of MSP430 and Its Application in Sea Temperature Measurement

JIAO Bing,YE Song,WEN Ya-ting

DOI: https://doi.org/10.3969/j.issn.1004-373x.2011.10.059

2011-01-01

Abstract:The low-power consumption principle of SCMs in MSP430 series and its working mode are introduced.The fast conversion way among all kinds of working modes is analyzed.According to the sea temperature measurement environment of battery power supply and space restriction,a design scheme of sea temperature acquisition system is presented by means of the excellent characteristics such as low-power consumption,high performance and multi-peripherals of SCM in MSP430 series.MSP430F4794 chip is taken as the operation control unit in the scheme and NTC thermistor as the temperature sensor.The analog-to-digital conversion is implemented by SD16_A inside MSP430F4794 chip.The low power peripheral devices are adopted in hardware design,and the low-power consumption of the whole system is realized through various low power working modes provided by MSP430 in software design.
Low Power Consumption Design of the Data Acquisition Node for 5-digit Directly Reading Gas Meter

王建强,许鹏,冯军,杨永杰,谢正光

DOI: https://doi.org/10.3969/j.issn.1000-0380.2014.06.018

2014-01-01

Abstract:Aiming at the deficiency in current energy consumption design for data acquisition node in wireless meter reading system, with help of photoelectric directly reading technology and MSP430 as the control core, as well as accompanied the high performance radio frequency chip Si4432, the data acquisition node for 5-digit directly reading gas meter has been designed and implemented. The specific design of hardware and software for each module are given. The results of theoretical calculation and test analysis show that the operational life cycle of such node is 3. 5 to 5 years, thus the requirement of low power consumption design is satisfied. The node features advantages of compact structure, precise metering, small error and reliable data transmission;it possesses good marketing and application prospects.
Design of Networked Intelligent Electronic Water Meter Based on MSP430 Single Chip Computer

Wu Yanan,Shu Guohua,Zhang Shiwen

DOI: https://doi.org/10.3969/j.issn.1000-0380.2008.04.014

2008-01-01

Abstract:The design scheme of a networked intelligent water meter is introduced. The features of the composition and the functions of each part of the system are described. The application and development of the intelligent water meter based on the low power consumption single chip computer MSP430F1232, and the hardware structure of its control section and the implementation of software control flowchart are investigated emphatically. By combining both software and hardware,anti-interference capability and the reliability of the signal transmission procedure are studied in further. The detecting method of using double Hall sensor is proposed.
Design of the Wireless Ultrasonic Heat Energy Meter with Ultra-low Power Consumption

Wang Xiaojun,Xu Kai,Zhou Xingpeng

DOI: https://doi.org/10.3969/j.issn.1000-0380.2012.03.023

2012-01-01

Abstract:Aiming at the demerits of existing domestic wireless heat energy meters,e.g.,high power consumption,weak RF penetrate ability,and incomplete information,based on ultrasonic flow measurement and 433MHz RF communication,the wireless ultrasonic heat energy meter with low power consumption is researched and designed.By adopting dynamic power adjustment and flow driven wireless transmission mode,the power consumption is reduced while the metering information is not lost.The average operating current of each year is lower than 14 μA,so the meter can work 20 years with only one piece of built-in 2 800 mA Lithium battery.This overcomes the technical obstacles for wide popularization of wireless heat energy meters.
A Low Power Consumption Intellective Meter for Checking and Recording

张健,曹慧哲,聂爽,于智吉

DOI: https://doi.org/10.3969/j.issn.1002-2279.2006.04.043

2006-01-01

Microprocessors

Abstract:A low power consumption intellective meter for checking and recording was introduced,which was used in railway system and the other situation such as check on work attendance.The checking and recording was completed by the single-chip computer,which was the core and the other circuit,which completed the other functions.The main characteristics of the meter were low consumption,small volume,and the convenience in use.
Design of Intellectual Viscometer Based on MSP430F449

杨圣洁,滕召胜,林海军,张洪川

DOI: https://doi.org/10.3969/j.issn.1002-1841.2009.04.005

2009-01-01

Abstract:The design and implementation of an intelligent viscometer was introduced,which was equipped with MSP430F449 with super low power consuming for information processing and capacitive sensor for accurate liquid level measurement.The structure and working principle of the intelligent viscometer was discussed,the hardware design on temperature measurement and control module and liquid level detection module was described in detail,and the software realizing plan was presented.Experimental results indicate that all the indicators of the instrument reach or are superior to the demands of the national standards for industrial viscometer,of which the timing error is less than 0.5%,the repeatability of group is superior to 0.3%,and the accuracy of water tank temperature control is 0.05 ℃.The instrument can be operated easily,with high measurement accuracy and intelligence degree.
Design of Temperature and Humidity Networked Sensor with Ultra-Low Power Consumption Based on WiFi

HE Peng-ju,ZHANG Jie,ZHANG Liang-liang

DOI: https://doi.org/10.3969/j.issn.1000-8829.2013.02.022

2013-01-01

Abstract:High loss power and wireless location of WiFi are two core issues that hinders its application in a wireless network sensor.An ultra-low power temperature and humidity network sensor is designed for long-term monitoring of temperature and humidity data,which uses WiFi and ARM7 core integrated SoC chip GS1010 and SHT15 temperature and humidity sensor.Based onμC/OS-Ⅱembedded real-time operating system,the software realizes low-power management based on sleep-wake mechanism,SNMP-based network management, wireless RSSI-based location,and sensor data acquisition and wireless transmission.The test results show that the sensor is stable and reliable,and meets the requirements of low-power temperature and humidity monitoring and wireless location.
Design of Intelligent Prepaid Water-meter Based on Low Power Consumption CPU Card

Jun Guo

2008-01-01

Abstract:CPU card as a special microcontroller of embedded operating system,has already present increasingly booming Vitality.This article introduces how to use 16-bit low power consumption single chip MSP430F413 to develop CPU card intelligent water-meter,Analyzing the hardware and software design of each module.
Multi-functional Three Phase Energy Meter Based on MSP430 and ZigBee

LIU Jin-hua,CHENG Cai-yun

DOI: https://doi.org/10.3969/j.issn.1001-1390.2009.z1.030

2009-01-01

Abstract:In this paper,design of a multi -functional three phase energy meter based on ultralow power microcontroller TI MSP430 and ZigBee is introduced,the hardware circuit and software design are also discussed in detail.This design has many features,such as high accuracy in measurement,stable performance,various communication methods,low power and low cost,so there is good market prospect and application value.
Low-power Design of Temperature Data-logger Based on MSP430F149

ZHOU Le-chuan,HONG Qin,YE Shu-ming

DOI: https://doi.org/10.3969/j.issn.1002-1841.2008.02.038

2008-01-01

Abstract:Temperature data-logger is widely used.It is always required to work for a long time.Therefore,as to the battery-powered data-logger,the system low-power design is one of the keys to a successful device.Designed a temperature data-logger based on MSP430F149 by optimizing the software and hardware,focus on the principle of low-power.The device was portable and low-power,meeting the requirement to record temperature data in a long time automatically.Via measurement and theoretical calculation,the working frequency of MSP430F149 which optimized the power of the system in a particular task was provided.
Design of the New Type of Open Channel Flowmeter with Low Power Consumption

李斌,马王君

DOI: https://doi.org/10.16086/j.cnki.issn1000-0380.201502023

2015-01-01

Abstract:Through researching and analyzing existing open channel flowmeters, the design scheme for new type of open channel flowmeter with low power consumption is proposed. In this design, by adopting plate-type water level sensor and Parshall flume to achieve flow measurement;the MSP430 single chip machine is used as the kernel processor; the entire system is solar powered. And the software is optimized from six aspects to reduce the system consumption. Having been tested, the flowmeter operates stably with low error, low power consumption, it is especially suitable for remote areas where are long term unattended.
Low-Power Design and Implementation of Wireless Remote Gas Meter Reading

崔洋,姜宇,钟丽鸿,张健,胡成全

DOI: https://doi.org/10.3969/j.issn.1004-1699.2010.02.014

2010-01-01

Abstract:Low-power design of motes is critical in wireless sensor networks.We consider three main aspects of low power consumption and design and implement the mote for remote gas meter reading.This paper describes the main energy saving methods and the modules of implementation in details.The simulation and experiment results show that our design can extend 3~5 years of the battery lifetime for gas meter thus it fulfills the application requirement of the gas utility reading system.

Research of Low Power Consumption Intelligent Heat Meter

Design of Intelligent and Low-Power for Vortex Flow-Meter

An Intelligent Transmitter of Variable-area Flow-meter Based on MSP430

Research and Development of Heat Meter Featuring High Precision and Ultra-Low Power Consumption

Design and Implementation of Low Power Nonmagnetic Heat Meter Based on MCU MSP430

Design and Implementation of Artificial Intelligent Heat Meter with Ultra-Low Power Consumption

Research and Development of IC Card Gas Meter with Low Power Consumption

Design of Intelligent Heat Meter and Temperature Control Integrated System Based on MSP430

Design of the Circuit Control System for Intelligent Card Heat Meter Based on MSP430 Microcontroller

Low-power Consumption Principle of MSP430 and Its Application in Sea Temperature Measurement

Low Power Consumption Design of the Data Acquisition Node for 5-digit Directly Reading Gas Meter

Design of Networked Intelligent Electronic Water Meter Based on MSP430 Single Chip Computer

Design of the Wireless Ultrasonic Heat Energy Meter with Ultra-low Power Consumption

A Low Power Consumption Intellective Meter for Checking and Recording

Design of Intellectual Viscometer Based on MSP430F449

Design of Temperature and Humidity Networked Sensor with Ultra-Low Power Consumption Based on WiFi

Design of Intelligent Prepaid Water-meter Based on Low Power Consumption CPU Card

Multi-functional Three Phase Energy Meter Based on MSP430 and ZigBee

Low-power Design of Temperature Data-logger Based on MSP430F149

Design of the New Type of Open Channel Flowmeter with Low Power Consumption

Low-Power Design and Implementation of Wireless Remote Gas Meter Reading