Abstract:Birds have a remarkable ability to perform complex maneuvers at post-stall angles of attack. The passive deployment of self-actuating covert feathers in response to unsteady flow separation while performing such maneuvers provides a passive flow control paradigm for these aerodynamic capabilities. Most studies involving covert-feathers-inspired passive flow control have modeled the feathers as a rigidly attached or a freely moving flap on a wing. A flap mounted via a torsional spring enables a configuration more emblematic of the finite stiffness associated with the covert-feather dynamics. The performance benefits and flow physics associated with this more general case remain largely unexplored. In this work, we model covert feathers as a passively deployable, torsionally hinged flap on the suction surface of a stationary airfoil. We numerically investigate this airfoil-flap system at a low Reynolds number of $Re=1{,}000$ and angle of attack of $20^\circ$ by performing high-fidelity nonlinear simulations using a projection-based immersed boundary method. A parametric study performed by varying the stiffness of the spring, mass of the flap and location of the hinge yielded lift improvements as high as 27% relative to the baseline flap-less case and revealed two dominant flow behavioral regimes. A detailed analysis revealed that the stiffness-dependent mean flap deflection and inertia-dependent amplitude and phase of flap oscillations altered the dominant flow characteristics in both the regimes. Of special interest for performance benefits were the flap parameters that enhanced the lift-conducive leading-edge vortex while weakening the trailing-edge vortex and associated detrimental effect of upstream propagation of reverse flow. These parameters also yielded a favorable temporal synchronization of flap oscillations with the vortex-shedding process in both regimes.

PARAMETER STUDY OF THE AIRFOIL WITH FLAP USED FOR ELECTRICAL CONTROLLED ROTOR

Aerodynamic Model of Airfoil with Flap Used for Electrical Controlled Rotor Aeroelastic Analysis

Aeroelastic Parameter Design for Electrical Controlled Rotor

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Aeroelastic Dynamic Modeling of the Electrically Controlled Rotor

Development of Mach Scale Rotors with Tailored Composite Coupling for Vibration Reduction

A Study on Influence of Flapping Dynamic Characteristics on Vibration Control of Active Rotor with Trailing-Edge Flaps

Optimization and Analysis of a Blown Flap Based on a Multielement Airfoil

Investigation of the Steady Control Response of Electrically Controlled Rotor

An Experimental Study on Rotor Aerodynamic Noise Control Based on Active Flap Control

Aerodynamic optimization of a micro flapping rotary wing in hovering flight

Parametric Study on Aerodynamic Performance of a Flapping Wing Rotor MAV Capable of Sustained Flight

Analysis of transient aeroelastic response for shipboard articulate rotor

Unsteady aerodynamics of a micro flapping rotary wing in forward flight

Aerodynamic Analysis of a Flapping Wing Aircraft for Short Landing

Prediction of Rotor Structural Loads with Comprehensive Analysis

Experimental study on the effect of bionic flap parameters on airfoil aerodynamic performance

Study on Aerodynamic Interaction of Rotor and Fuselage in Hover and Its Application to Flap Width Determination of Winged Helicopters

Numerical Simulation of 2D Airfoil Lift Enhancement with Flaps

Passive separation control of a NACA0012 airfoil via a flexible flap

Fluid-structure interaction of a bio-inspired passively deployable flap for lift enhancement