Abstract:The industrial application of electrical discharge machining (EDM) for manufacturing injection molding, in many cases, requires forming depth cavities with high length-to-width ratios, which is quite challenging. During slot EDM with thin-walled electrodes, short-circuits and arcing discharges occur, as a result of low efficiency in removing debris and bubble gas from the gap. Furthermore, unstable discharges can cause increases in tool wear and shape deviation of the machined parts. In order to characterize the influence of the type of electrode material and EDM parameters on the deep slot machining of high-thermal-conductivity tool steel (HTCS), experimental studies were conducted. An analytical and experimental investigation is carried out on the influence of EDM parameters on discharge current and pulse-on-time on the tool wear (TW), surface roughness (Ra), slot width (S)-dimension of the cavity, and material removal rate (MRR). The analyses of the EDS spectrum of the electrode indicate the occurrence of the additional carbon layer on the electrode. Carbon deposition on the anode surface can provide an additional thermal barrier that reduces electrode wear in the case of the copper electrode but for graphite electrodes, uneven deposition of carbon on the electrode leads to unstable discharges and leads to increase tool wear. The response surface methodology (RSM) was used to build empirical models of the influence of the discharge current I and pulse-on-time ton on Ra, S, TW, and MRR. Analysis of variance (ANOVA) was used to establish the statistical significance parameters. The calculated contribution indicated that the discharge current had the most influence (over 70%) on the Ra, S, TW, and MRR, followed by the discharge time. Multicriteria optimization with Derringer's function was then used to minimize the surface roughness, slot width, and TW, while maximizing MRR. A validation test confirms that the maximal error between the predicted and obtained values did not exceed 7%.

Research of EDG for Slender Rod With Low Rigidity

Novel Arrangements For High Performance And Durable Dielectric Elastomer Actuation

Durable Dielectric Elastomer Actuation

Experimental investigations and process optimization of SKD61 for sinking EDM

Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect

High-speed Near Dry Electrical Discharge Machining

Experimental Investigation and Optimization of Rough EDM of High-Thermal-Conductivity Tool Steel with a Thin-Walled Electrode

Surface Integrity of Binderless WC Using Dry Electrical Discharge Assisted Grinding

Investigation on a Novel Surface Microstructure Wire Electrode for Improving Machining Efficiency and Surface Quality in WEDM

Analysis and Reduction of Process Energy Consumption and Thermal Deformation in a Micro-Structure Wire Electrode Electric Discharge Machining Thin-Wall Component

Research on EDM Performance of Renewable Dielectrics under Different Electrodes for Machining SKD11

Experimental research on EDM-milling of sintered NdFeB

Unraveling the technological performance of low-energy ED-machining for processing Inconel 718 alloy: a comparative study of electrode materials

Feasibility Study of Deep Micro Slit Making by Micro EDM with Flat Electrode

Study of electrical discharge machining of narrow grooves with foil tool electrode

Evaluation of Wire Electrical Discharge Machining Performance Features on EN AW-6082 T6 Aluminum Alloy and Optimization of Machining Characteristics

Investigation of magnetic field effect on MRR, EWR and surface roughness during EDM of AISI420 tool Steel

Study of electrode feeding method for EDM hollowing

Using rapid prototyping to produce electrical discharge machining electrodes

Sustainable Production of High-Uniformity Workpiece Surface Quality in Wire Electrical Discharge Machining by Fabricating Surface Microstructure on Wire Electrode

Influence of electrical parameters in electro discharge machining of tungsten heavy alloys on surface texture properties