Abstract:A variety of cutting tool materials are used for the contact mode mechanical machining of components under extreme conditions of stress, temperature and/or corrosion, including operations such as drilling, milling turning and so on. These demanding conditions impose a seriously high strain rate (an order of magnitude higher than forming), and this limits the useful life of cutting tools, especially single-point cutting tools. Tungsten carbide is the most popularly used cutting tool material, and unfortunately its main ingredients of W and Co are at high risk in terms of material supply and are listed among critical raw materials (CRMs) for EU, for which sustainable use should be addressed. This paper highlights the evolution and the trend of use of CRMs) in cutting tools for mechanical machining through a timely review. The focus of this review and its motivation was driven by the four following themes: (i) the discussion of newly emerging hybrid machining processes offering performance enhancements and longevity in terms of tool life (laser and cryogenic incorporation); (ii) the development and synthesis of new CRM substitutes to minimise the use of tungsten; (iii) the improvement of the recycling of worn tools; and (iv) the accelerated use of modelling and simulation to design long-lasting tools in the Industry-4.0 framework, circular economy and cyber secure manufacturing. It may be noted that the scope of this paper is not to represent a completely exhaustive document concerning cutting tools for mechanical processing, but to raise awareness and pave the way for innovative thinking on the use of critical materials in mechanical processing tools with the aim of developing smart, timely control strategies and mitigation measures to suppress the use of CRMs.

The Current Status of Tool Materials in Dry Cutting

Cutting Performance and Failure Mechanisms of a Pure WC Cutting Tool in Dry Cutting of Cr12Mn5Ni4Mo3Al Stainless Steels and HT200 Grey Cast Iron

The Critical Raw Materials in Cutting Tools for Machining Applications: A Review

Edge preparation methods for cutting tools: a review

A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals

Dry Machining Techniques for Sustainability in Metal Cutting: A Review

Research Status in Preparation of Modern Cutting Tool Coatings

Experimental Investigation on Tool Wear in Green Cutting Difficult-cut-materials

A comprehensive review of tool surface texturing in the cutting process

STUDY ON THE WEAR PERFORMANCES OF CERAMIC TOOLS FOR MACHINING 304 STAINLESS STEEL

Research on cutting performance and processing surface quality of micro-structured composite-coated tool: a comprehensive review

STUDY ON CUTTING PERFOR-MANCE OF NANO-CEMENTED CARBIDE CUTTING TOOLS

Study on Cutting Performance of New Coated Tools for Dry Milling of SKD11

The Current Status and Development of Machining and Tool

Recent Advances in Design and Preparation of Micro Diamond Cutting Tools

Cutting Performances of CVD Film Coated Tools

Wear mechanism and cutting performance evaluation of fine ceramic tools

Study on Lubricating Characteristic and Tool Wear with Water Vapor As Coolant and Lubricant in Green Cutting

Friction behaviors in the metal cutting process: state of the art and future perspectives

Design, Fabrication and Properties of a Self-Lubricated Tool in Dry Cutting

Cutting Performance and Application of Coated Cutting Tools