Abstract:Despite significant progress in research and development of aluminum shear panels in recent decades, their implementation for seismic retrofit of existing reinforced concrete (RC) buildings can still be significantly extended. Their application is limited by the general lack of relatively simple and effective design criteria and proper guidelines. This paper develops a design method for the seismic retrofit of reinforced concrete buildings using aluminum multi-stiffened shear panels as dampers. Both the nonlinearity in the structure and the dampers-structure interaction are considered to give an optimal distribution of the shear panels over the height of the building. The analytical laws refer to dissipative aluminum shear panels recently tested and analyzed by the authors. The proposed procedure has been described in detail. Its applicability has been demonstrated by analyzing two typical RC buildings having drift capacity-to-demand ratios ranging from 0.505 to 0.624. The design value of the panel-to-frame stiffness ratio has been found to range from 0.594 to 1.432 as a function of the lateral stiffness of the existing building. The verification of the proposed procedure has been carried out by checking the validity of the design assumptions. The first one (i.e., the mode shapes remain the same before and after retrofit) has been checked using the modal assurance criterion that gives values ranging from 0.992 to 0.998. The second one (i.e., uniform yield drift distribution over the building height) has been checked by comparing the yield drifts with their average value giving a standard deviation ranging from about 11 to 15%. The effectiveness of the design method has been finally validated through nonlinear time-history analysis for different seismic accelerograms and hysteresis models. The results show that the seismic retrofit design procedure is effective in significantly reducing inter-story drift (maximum inter-story drift ratio demands ranging from 1.04 to 2.07%) thus satisfying the acceptance criteria of the building, and avoiding drift concentration and consequential weak story collapse.

A practical method of seismic retrofit of R C frame using energy dissipation device

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Displacement-based Design Method for Energy Dissipation Structures with Nonlinear Viscous Dampers

Study on Displacement-Based Design Method for Energy Dissipation Structures

Study on energy-based seismic design method of reinforced concrete frame structures

Development and application of replaceable self-centering energy dissipative braces

Research Review on Seismic Retrofit of Earthquake-damage RC Structure by Using Energy Dissipation Technology

Study on energy dissipation mechanism control in energy-based seismic design method of reinforced concrete frame-shear-wall structure

ASEISMIC DESIGN METHODS OF PASSIVE ENERGY DISSIPATION SYSTEMS

Design of RC Frame Structure with Energy-Dissipated Braces in Suqian Education Building

Analysis on displacement‐based seismic design method of recycled aggregate concrete‐filled square steel tube frame structures

Seismic performance design of energy-dissipated structure system based on damage control and time-varying damping ratio

A design method for seismic retrofit of reinforced concrete frame buildings using aluminum shear panels

Study on energy demand determination and design procedure in energy-based seismic design method of reinforced concrete frame-shear-wall structure

Seismic Performance of Damaged Frame Retrofitted with Self-Centering and Energy-Dissipating Rocking Wall

Experimental study on seismic behaviors of energy-dissipated braced frame structure with concrete-filled rectangular steel tubular columns and steel beams

Study on energy-based application on steel seismic design method and braced frame structures

Innovative hysteretic device for seismic retrofit of single-story RC precast buildings

Structural Analyses and Design of Seismic Retrofitting with Energy Dissipation Dampers for Beijing Hotel and Other Key Buildings in Beijing

Seismic Plastic Design of RC Frame Structure Based on Energy Balance

Potential use of rotational metallic dampers for seismic enhancement of infilled RC frames with open first story