Abstract:As environmentally friendly materials, carbon black and bio-oil can be used as modifiers to effectively enhance the poor high-temperature and low-temperature performance of base asphalt and its mixture. Different carbon black and bio-oil contents and shear time were selected as the test influencing factors in this work. Based on the Box–Behnken design (BBD), carbon black/bio-oil composite modified asphalt was prepared to perform the softening point, penetration, multiple stress creep and recovery (MSCR), and bending beam rheometer (BBR) tests. The response surface method (RSM) was used to analyze the test results. In addition, the base asphalt mixtures and the optimal performance carbon black/bio-oil composite modified asphalt mixtures were formed for rutting and low-temperature splitting tests. The results show that incorporating carbon black can enhance the asphalt’s high-temperature performance by the test results of irrecoverable creep compliance (Jnr) and strain recovery rate (R). By contrast, the stiffness modulus (S) and creep rate (M) test results show that bio-oil can enhance the asphalt’s low-temperature performance. The quadratic function models between the performance indicators of carbon black/bio-oil composite modified asphalt and the test influencing factors were established based on the RSM. The optimal performance modified asphalt mixture’s carbon black and bio-oil content was 15.05% and 9.631%, and the shear time was 62.667 min. It was revealed that the high-temperature stability and low-temperature crack resistance of the carbon black/bio-oil composite modified asphalt mixture were better than that of the base asphalt mixture because of its higher dynamic stability (DS) and toughness. Therefore, carbon black/bio-oil composite modified asphalt mixture can be used as a new type of choice for road construction materials, which is in line with green development.

Study on Compatibility and Dispersion of Asphalt Modified with Coal Tar Pitch

Improved Properties of Weathered Coal and SBR/Weathered Coal Compound Modified Asphalt

Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black

Experimental Study on Pavement Performances of SBP Modified Asphalt

Preparation Process of Coal Tar Pitch Powder and Its Stability Research

Study on the Variety of Rheological Properties and Thermal Analysis of Modified Coal Tar Pitch with 1,4-Benzenedimethanol

Modification of Coal Tar Pitch with Aromatic Nitro-Compounds

Performance enhancement of modified asphalt via coal gangue with microstructure control

Application of Coal Tar Products and Evaluation of the Stability of Residual Marine Fuels

Study on the Compatibility Between Polyurethane and Asphalt Based on Experiment and Molecular Dynamics Simulation

Further processing and prospect of coal tar pitch utilization

Study on composite test of additive to coal water mixture

Application of the compatibility theory and the solubility parameter theory in SBS modification asphalt

De-agglomeration and homogenisation of nanoparticles in coal tar pitch-based carbon materials

Properties of asphalt modified with ultra-fine full-vulcanized powdered styrene-butadiene rubber and influence of compatilizer

Hydrogenation Behaviors and Structural Variations of Subfraction of Coal Tar Pitch and Preparation of Mesophases with Well-Developed Optical Textures

Experimental studies and molecular dynamics simulation of the compatibility between thermoplastic polyurethane elastomer (TPU) and asphalt

Study of Polymer Crosslinking Modified Additives to Coal Water Mixture Capability

Analysis of the properties of two kinds of coal tar pitches used for impregnation of C/C composite

Laboratory Investigation of Carbon Black/Bio-Oil Composite Modified Asphalt

Insight into the diffusion behaviors of SBS‐compatibilizer‐coupled modified asphalt: Molecular dynamics simulation and experimental validation