Abstract:Epoxy resin carbons are of high strength, high temperature resistance, and corrosion resistance, which are widely used as the precursor of carbon composite materials. However, the applications of epoxy resin carbons are greatly limited for the characteristic of non-graphitization and low char yield (22 wt%). In this paper, coal tar pitch was used to modify epoxy resin carbons via a simple heating mixing, pyrolysis and high temperature graphitization. The results show that the coal tar pitch content and heat treatment temperature can improve the ordered graphite carbon content. As the coal tar pitch content increase, the ordered graphite carbon content of modified epoxy resin carbon increase after 3000 °C graphitization for 0.5 h. Particularly, the graphitization degree of epoxy resin carbon and 40 wt% coal tar pitch modified epoxy resin carbon are 8.42 % and 44.21 %, respectively. The grain size (L c = 13.84 nm) and grain stacking height (L a = 7.79 nm) of 40 wt% coal tar pitch modified epoxy resin carbon are bigger than epoxy resin carbon (L c = 3.44 nm, L a = 3.45 nm). The ordered coal tar pitch graphite carbon and disordered epoxy resin amorphous carbon are evenly distributed in the modified epoxy resin carbon, indicating a good comparability of coal tar pitch and epoxy resin. Besides, the entangling carbon ribbon are observed in the epoxy resin carbon after graphitization at 3000 °C. With the increase of coal tar pitch content, the content of carbon element, aromatic ring number, the char yield and thermal decomposition temperature of modified epoxy resin increased. Moreover, the char yield of expoxy resion modified by 50 wt% coal tar pitch is 42 wt%, almost two times higher than that of epoxy resin (22 wt%). The increased char yield of modified epoxy resin mainly inherited the high char yield of coal tar pitch (50 wt%) and the chemical crosslinking weight gain. More interesting, the chemical crosslinking weight gain reaches the maximum value of 15 wt% when the content of coal tar pitch is 40wt%. The reason for that is the possible chemical crosslinking reaction can be occured by the epoxy group and hydroxyl group within epoxy resin and carboxyl group and phenolic hydroxyl group within coal tar pitch. This study provides some theory foundation for the future application of epoxy resin carbon composite materials.

Modification of Coal Tar Pitch with Aromatic Nitro-Compounds

Effect of fluoride on the properties and structure of pitch coke from coal-tar pitch

Research on Coal Tar Pitch Catalytic Oxidation and Its Effect on the Emission of PAHs during Co-Carbonation with Coal

Preparation and Characterization of Coal-Pitch-Based Needle Coke (Part III): The Effects of Quinoline Insoluble in Coal Tar Pitch

Analysis of the properties of two kinds of coal tar pitches used for impregnation of C/C composite

Study on the Variety of Rheological Properties and Thermal Analysis of Modified Coal Tar Pitch with 1,4-Benzenedimethanol

Effects of co-carbonization of medium and low temperature refined pitch and high temperature refined pitch on the structure and properties of needle coke

Molecular representation and atomic-level coking evolution investigation of modified coal tar pitch via 13 C NMR, MALDI-TOF-MS, SAXS, and ReaxFF MD

Preparation and Characterization of Coal Pitch-Based Needle Coke (Part II): The Effects of β Resin in Refined Coal Pitch

Thermal Conversion Characteristics of Coal Tar Soft Pitch at Atmospheric and Elevated Pressures

De-agglomeration and homogenisation of nanoparticles in coal tar pitch-based carbon materials

Co‐Carbonization of Medium‐ and Low‐Temperature Coal Tar Pitch and Coal‐Based Hydrogenated Diesel Oil Prepare Mesophase Pitch for Needle Coke Precursor

Further processing and prospect of coal tar pitch utilization

Effect of coal tar pitch modification on the structure and char yield of pyrolysis epoxy resin carbons

The effect of n-heptane soluble content on the composition and structure of coal tar pitch and the preparation of needle coke

Mesophase formation of coal-tar pitches used for impregnant of C/C composites

Characteristics of the mesophase and needle coke derived from the blended coal tar and biomass tar pitch

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Coke formation on activated carbon during catalytic upgrading of coal pyrolysis volatiles