Abstract:Propylene serves as one of the most significant compounds in the chemical industry. Propane dehydrogenation (PDH), an “on purpose” propylene production technology is developing. Pt- and CrO x -based catalysts are widely applied in commercialized PDH processes, and both exhibit high activity and propylene yields. However, as an intensively endothermic process, PDH requires operation at high temperatures (generally above 500 °C), which restricts the C3H6 selectivity and catalyst structure stability on account of coking side reactions, particle sintering, and so forth. Nanostructured catalysts (NCs) based on metals and/or metal oxides with tunable geometric and electronic properties play significant roles because such features intrinsically influence the adsorption of propyl intermediates on the catalyst surface. However, thermodynamical metastability of these NCs results in grand challenges in their structure-controlled preparation. The regulation of material structure and reaction performance at the molecular and atomic levels has attracted extended attention over the past few years. This Account describes our recent advances in controllable regulation of metal and oxide NCs toward efficient propane dehydrogenation. As a structure-insensitive reaction, the dehydrogenation of propane can occur on an individual active site, while larger ensembles of active sites also induce structure-sensitive side reactions, leading to C–C cracking and coke deposition. This paper is aimed at delivering general fundamentals for rational design of NCs in PDH reactions. We start with the catalytic kinetics on the active sites regarding the adsorption of key propyl intermediates on the surface. In subsequent sections, we present the effective regulation strategies for metal and oxide NCs by promoter and support effects. Upon metal NCs, coke deposition and nanoparticles (NPs) sintering tend to occur, which can be suppressed with the increase of geometric separation and charge density of surface active sites by changing alloy compositions, ordered intermetallic alloys, single-atom catalysts, core–shell, and metal–oxide interface structures. Notably, the confinement approach of embedding active sites in zeolite frameworks significantly inhibits the sintering of metal NPs. As alternatives to metals, metal oxides exhibit lower cost but higher barriers of C–H activation and coking inclination. The C–H bond cleavage has been promoted by inducing intrinsic defect sites, such as oxygen vacancies, hydroxyls, and hydrides on the surface and heterogeneous doping in the bulk. Importantly, the structures of the submonolayer/monolayer triggered by spontaneous dispersion and confinement in mesoporous materials significantly improve the oxide activity and stability. All of these strategies have been essential for the efficient PDH reactions. Moreover, the challenges and perspectives are also discussed. It is hoped that the deliberate manipulation of nanostructured catalysts to regulate the reaction mechanism will hold the key to efficient alkane conversion.

Oxidative Dehydrogenation of Propane to Propene over NaMoNiO Nanocomposite Oxide Catalysts

Oxidative Dehydrogenation of Propane over Ni-Mo-Mg-O Catalysts

Effective Hydrogen Production from Partial Oxidation of Propane over Composite Ni/Al2O3-SiC Catalyst

Nanostructured CoMoO4 Supported on Mesoporous SBA-15 for Catalytic Oxidative Dehydrogenation of Propane to Propene

Catalyzing Oxidative Dehydrogenation of Propane over Carbon Nanofiber Supported Phosphoric Oxides Catalysts

Dendritic Mesoporous Silica Nanoparticle-Supported Molybdena Catalysts for Propane Selective Oxidation: Catalytic Performance versus Molybdena Molecular Structure

Oxidative Dehydrogenation of Propane over Catalysts Based on Carbon Nanofibers

Impact of surface-active site heterogeneity and surface hydroxylation in Ni doped ceria catalysts on oxidative dehydrogenation of propane

Oxidative Dehydrogenation Of Propane To Propylene With Co2 Over Cr/Nazsm-5 Catalysts

Photo-Thermal Synergistic Catalytic Oxidative Dehydrogenation of Propane over a Spherical Superstructure of Boron Carbon Nitride Nanosheets

NiO and CrOx interaction promoting in situ generation of the coordinatively unsaturated Cr-O acid-base for oxygen-lean propane dehydrogenation

Mesoporous Chromium Catalysts Templated on Halloysite Nanotubes and Aluminosilicate Core/Shell Composites for Oxidative Dehydrogenation of Propane with CO2

Roles of Niobium in the Dehydrogenation of Propane to Propylene over a Pt/Nb-modified Al2O3 Catalyst

Effect of Mo content on oxidative dehydrogenation of propane with CO2 over ZnOx catalysts supported on Mo–Zr mixed–oxides

STUDIES OF OXIDATIVE DEHYDROGENATION OF PROPANE WITH CARBON DIOXIDE TO PROPENE Preparation, Surface Microcalorimetric Adsorption and Catalytic Activity of Cr-Mg-Al-O Mixed Oxide Catalysts

A Practical Grinding-Assisted Dry Synthesis of Nanocrystalline NiMoO4 Polymorphs for Oxidative Dehydrogenation of Propane

Perovskite-Derived Pt–Ni/Zn(Ni)TiO3/SiO2 Catalyst for Propane Dehydrogenation to Propene

Finned Zn-MFI zeolite encapsulated noble metal nanoparticle catalysts for the oxidative dehydrogenation of propane with carbon dioxide

Nanostructured Catalysts toward Efficient Propane Dehydrogenation

A Highly Effective Ni-Modified Mnox Catalyst for Total Oxidation of Propane: the Promotional Role of Nickel Oxide

Hydrothermal Synthesis of NiCeOx Nanosheets and Its Application to the Total Oxidation of Propane