The Filtration and Fouling Performance of Membranes with Different Pore Sizes in Algae Harvesting.
Fangchao Zhao,Huaqiang Chu,Zhenjiang Yu,Shuhong Jiang,Xinhua Zhao,Xuefei Zhou,Yalei Zhang
DOI: https://doi.org/10.1016/j.scitotenv.2017.02.035
IF: 9.8
2017-01-01
The Science of The Total Environment
Abstract:In this study, ultrafiltration membranes with three different pore sizes were applied for algae harvesting to investigate filtration performance. The critical fluxes (JC) increased as the pore size increased, and the JC of 0.03-, 0.05- and 0.1-μm membranes were 20.0, 25.0 and 42.0Lm-2h-1, respectively. During continuous filtration, 0.7JC was selected as the operation flux and the 0.1-μm membrane had the highest initial flux and final flux. It also had the highest flux decline rate, and therefore, the 0.1-μm membrane was more appropriate for algae separation compared to the 0.03- and 0.05-μm membrane. The mechanism by which pore size influenced filtration performance and membrane fouling was presented from the viewpoint of permeate drag force (FD). A lower FD retarded the velocity of algae cells towards the membrane, which could decelerate the deposition of particles on the membrane and thus reduce the membrane fouling rate. As the pore size increased, the membrane hydraulic resistance (Rm) decreased, which led to a decrease of FD.