Abstract:Ramie fiber is one of the most important materials for textile manufacturing. However, the conventional degumming processes for ramie involve numerous chemicals and water consumptions, resulting in a serious environmental concern. The purpose of this work is to investigate the effect of low-temperature oxygen plasma (LTP-O2) treatment on ramie fabric degumming in combination with a subsequent mild wet chemical process. The oxygen plasma treatment variables such as oxygen gas pressure, discharge power and exposure time were investigated and optimized according to the indexes of fabric total impurity removal, whiteness, capillary rise height, tensile strength and elongation, etc. The results show that a notable effect of oxygen plasma on ramie degumming was observed in a subsequent mild wet chemical process. The fabric capillary rise height, whiteness, tensile strength and elongation of the pretreated ramie were improved with gas pressures from 20 Pa to 40 Pa, although accompying with a decrease tendency in impurity removal, as well as for the capillary rise height as pressures higher than 40 Pa. Furthermore, the fabric impurity removal, capillary rise height were enhanced with plasma discharge power from 30.0 W to 250.0 W, with less affects on fabric whiteness, tensile strength and elongation. Moreover, most of the degumming indexes were also improved as the exposure time from 1.0 min to 3.0 min, except for a worse deterioration of fabric tensile strength as an exposure time longer than 5.0 min. An optimized plasma process for ramie fabric degumming was at 40.0 Pa of oxygen gas and 250.0 W of glow discharge for 3.0 min. In comparison with a control and conventional degumming processes, higher degumming effects and mechanical properties of ramie fabric were achieved by the combination degumming process with more environmentally friendly due to less consumption of chemicals, water and energy. Moreover, the effect of oxygen plasma on ramie fiber was further confirmed and characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM).

Studies on the Effection of Biological Degumming for Ramie Bast Fibers

Degumming of ramie fibers by alkalophilic bacteria and their polysaccharide-degrading enzymes

A high-efficiency and eco-friendly degumming process for ramie fibers

Enzymatic degumming of ramie bast fibers

Ramie-degumming methodologies: A short review

Visual degumming process of ramie fiber using a microbial consortium RAMCD407

Engineering of a Bacillus subtilis Strain Deficient in Cellulase: Application in Degumming of Ramie

Isolation and characterization of cellulosic fibers from ramie using organosolv degumming process

Optimization of enzymatic ramie degumming using thermoalkaliphilic xylanase from Bacillus halodurans CM1 and a commercial pectinase

An effective degumming enzyme from Bacillus sp. Y1 and synergistic action of hydrogen peroxide and protease on enzymatic degumming of ramie fibers

High-efficiency and recyclable ramie cellulose fiber degumming enabled by deep eutectic solvent

Optimization of Alkali Treatment Conditions of Ramie Fabrics Using Box–Behnken Method

Trend of ramie industry development: A review of green degumming and the utilization of processing residues

Large-scale degumming of ramie fibre using a newly isolated Bacillus pumilus DKS1 with high pectate lyase activity

Application of New Amylase DMA-160 to Ramie Desizing Process

An alkali-free method to manufacture ramie fiber

Effect of low-temperature oxygen plasma on the degumming of ramie fabric

High-efficiency and recyclability of ramie degumming catalyzed by FeCl3 in organic solvent

Study on biochemical degumming process of mulberry fiber,part 1:single factor analysis

In-situ microbial degumming technology with Bacillus sp. HG-28 for industrial production of ramie fibers

Composition of ramie hemicelluloses and effect of polysaccharides on fiber properties