Abstract:One of the existent problems of metallocene catalyst is the difficulty in controlling its polymer morphology in despite of its numerous advantages. According to the morphology replication nature of ethylene polymerization, the polymer morphology could be improved by controlling the morphology of catalyst particle. The catalyst microparticles with narrow particle size distribution were obtained by rapid expansion from a supercritical solution (RESS). Propane was chosen as a supercritical solvent to micronize Cp2TiCl2 as metallocene catalyst sample. The ethylene polymerization was conducted in hexane medium. Cp2TiCl2 solubility in supercritical propane was studied at temperature of 393.15 and 403.15K and in the pressure range from 10 to 35MPa. The solubility data were fitted by using the Peng–Robinson (PR) equation of state with the AARD of 2.32%. RESS experiments were performed at different operation conditions, including solute concentration, pre-expansion temperature and pressure, nozzle length and diameter, sample collection distance and fluid flow rate, etc. Quasi-spherical and spherical particles of catalyst with several microns size were obtained and tested through ethylene slurry polymerization. Compared with the original catalyst particles, the size distribution and morphology of reformed catalyst particles and the related polymer were rapidly improved. Based on the analysis of SEM photos, three levels structure of particles prepared by RESS were revealed by scale-up of catalyst during polymerization. These multi-level particles were primary particle, globule and particle, respectively. Simultaneously, the primary particle size was determined to tens of nanometers because there was a one-to-one correspondence between catalyst and polymer at the microparticle, mesoparticle and macroparticle level scales. The size of the primary particle was consonant with the size calculated by model in literature.

Micronization of Polystyrene by Rapid Expansion of Supercritical Fluid Solution

Formation of Naphthalene Microparticles by Rapid Expansion of Supercritical Solutions

Preparation of Microparticles with the Rapid Expansion of Supercritical Solutions

Stable Single Device Multi-Pore Electrospraying of Polymeric Microparticles Via Controlled Electrostatic Interactions

Experimental and modeling study of the solid state polymerization of poly(ethylene terephthalate) over a wide range of temperatures and particle sizes

A Continuous RESS Process to Prepare PLA–PEG–PLA Microparticles

Study on Preparation of Polycarbonate Micro-Particles by Liquid Anti-Solvent Crystallization

Micronization of Titanocene Dichloride by Rapid Expansion of Supercritical Solution and Its Ethylene Polymerization

Study on Preparation of Polystyrene Micro-particles by Solventing-out Process

FORMATION OF TITANOCENE DICHLORIDE MICROPARTICLES BY RAPID EXPANSION OF SUPERCRITICAL SOLUTION AND CATALYZED ETHYLENE POLYMERIZATION

A Novel Technology for Fine Particle Coating by Using Rapid Expansion of Supercritical Fluid Solution

Mechanism of particle coating granulation with RESS process in a fluidized bed

Mechanism and Process of the Redispersion of the Aggregated Nano-Sio2 Particles During Emulsion Polymerization of Styrene

POLYSTYRENE FRACTIONATION WITH SUPERCRITICAL PROPANE

In-situ Emulsion Polymerization of Styrene in the Presence of Nano-Sio2

Fine particle coating for release control by using RESS process in fluidized bed

STUDY ON THE EXPANDING BEHAVIOR OF VINYLIDENE CHLORIDE-ACRYLONITRILE-STYRENE TERPOLYMER PARTICLES

The liquid volume expansion effect as a simple thermodynamic criterion in cholesterol micronization by supercritical assisted atomization

Formation, Stabilization & Application of Polymeric Nanoparticles

Technology of Ultra-fine RDX Coating with Rapid Expansion of Supercritical Solution Method

Modified Nanoprecipitation Method for Polysulfone Nanoparticles Preparation