Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

A New Method of Detecting Welding Seam Based on Wavelet Transform

Intelligent Flaws Identification Method for Oil Casing Pipe Based on Wavelet Packet Decomposition and Support Vector Machine

DSP-based Real-time Seam Tracking System for Large-sized Stainless Steel Welded Pipes

The Application of Wavelet Transform in Signal Detecting of Visual Sensor Used in V-Groove Submerged Arc Welding

Study on Multipass Welding Seam Recognition Based on Wavelet Transform

Welding Quality Monitoring of High Frequency Straight Seam Pipe Based on Image Feature

Radon transform-based method for measuring contour of weld seam

Detection of Water Pipe Leak Location Using Wavelet Packet Decomposition and Power Feature Extraction

Image Processing Technology for Pipe Weld Visual Inspection

Weld Seam Detection Method with Rotational Region Proposal Network.

A Method of the Welding Seam Declination Abstraction Based on the Image Sensor

A Method of D-Type Weld Seam Extraction Based on Point Clouds

Image Processing of Real-Time Automatic X-Ray Inspection System for Weld Defects

A 3D Vision-Based Weld Seam Extraction Method for Arbitrarily Placed Spatial Planar Weldments

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Defect detection method for high-resolution weld based on wandering Gaussian and multi-feature enhancement fusion

Method of weld recognition based on textural feature matching

Seam recognition with computer vision and its application

Weld Seam Recognition Based On CCD Image Processing

Research on weld seam feature extraction and defect identification technology