Abstract:For the efficient and effective detection in automatic non-destructive testing (NDT) of weld defects, the NDT probe must stay aligned with the welds. It is essential to detect the deviation between the seam and the probe by means of weld recognition, in order to adjust the relative position between the workpiece and the probe. The traditional weld recognition method is suitable for real-time seam tracking when the geometric feature of the groove is distinct; however, it may fail when applied to the formed weld recognition. Other methods proposed by researchers are unsatisfactory in the signal-to-noise ratio of imaging, separation degree of visual features and efficiency of the processing algorithm. To solve these problems, this paper proposes a novel visual weld recognition method using two directional lights. The directional lights are projected onto the edges of the seam to produce the distinct man-made “light and shadow” (LS) features. In this paper, we first study the principles and sensing requirements of the LS features; then a stroboscopic circuit is established to lighten the two directional lights alternatively and meanwhile synchronizes the camera to capture images when each light is on. Afterwards, we propose an image processing algorithm based on thresholding and edge extraction to calculate the accurate edges of the seam. Finally, a weld detection platform is established and experiments on weld recognition and deviation correction are conducted. The experiment results show that the proposed detection method can recognize the edges of the seam effectively in 0.023mm accuracy. The time cost of the image processing algorithm is not more than 13ms. The proposed method is suitable for weld detection where the reinforcements of the seams are as low as 1mm. It expected to be applied to the automatic vision-guided NDT of weld defects.

Study on Multipass Welding Seam Recognition Based on Wavelet Transform

Method of weld recognition based on textural feature matching

A New Method of Detecting Welding Seam Based on Wavelet Transform

The Application of Wavelet Transform in Signal Detecting of Visual Sensor Used in V-Groove Submerged Arc Welding

Weld Seam Recognition Based On CCD Image Processing

Laser-based Visual Recognition of Multi-Pass Seam in Robot Arc Welding

Multiple weld seam laser vision recognition method based on the IPCE algorithm

Welding Seam Recognition Based on Phase Classification

Seam Sensing of Multi-Layer and Multi-Pass Welding Based on Grid Structured Laser

Image Processing Method to Detect Seam Track of Thin Sheets

Algorithm of Weld Seam Feature Detection for Remote Welding

Recognition for Underwater Welding Seam Based on Laser Vision System

Weld Seam Edge Detection Based on Composite Edge Detectors

Robust welding seam tracking using image seam extraction

Study of vision sensing technology in seam recognition based on analyzing target feature

A vibration-resistant detection method of weld position and gap for seam tracking of Z-weave GMAW

A Visual Weld Edge Recognition Method Based on Light and Shadow Feature Construction Using Directional Lighting

Visual Method for Weld Seam Recognition Based on Multi-Feature Extraction and Information Fusion

A Method of the Welding Seam Declination Abstraction Based on the Image Sensor

A Robust Algorithm for Weld Seam Extraction Based on Prior Knowledge of Weld Seam

An Adaptive Feature Extraction Algorithm for Multiple Typical Seam Tracking Based on Vision Sensor in Robotic Arc Welding