Various Methods of Teaching "heat and Mass Transfer: Fundamentals and Equipment"

张寅平

DOI: https://doi.org/10.3969/j.issn.1005-2909.2003.04.011

2003-01-01

Abstract:Based upon the practice of teaching the course of Heat an d Mass Transfer: Fundamentals and Equipment, the methods of teaching are intr oduced and discussed in this paper.

What problem does this paper attempt to address?

Teaching of Chemical Engineering Thermodynamics Based on Aspen-Plus（Ⅰ）Homogeneous Property Calculation

陈新志,赵倩,钱超

DOI: https://doi.org/10.3969/j.issn.1000-6168.2011.05.024

2011-01-01

Abstract:As the basic subject,chemical engineering thermodynamics is a main course for process of chemical engineering.Aspen-Plus software which has been widely used in chemical engineering and industry,is adopted to calculate the homogeneous thermodynamic properties,and it has got satisfactory results.It provides better basis for teaching of chemical engineering thermodynamics and the students application ability is greatly upgraded.
Study on Designing Experiment Teaching Supporting Electrical Equipment Course

卢慧芬,邱建琪,潘再平

DOI: https://doi.org/10.3969/j.issn.1002-4956.2008.12.042

2008-01-01

Abstract:This paper analyzes the characteristics of integrated experiment designing work,proposes the methodology,and discusses the requirements on the experimental items,implementation,experimental reports and so on.Finally,it explores the approaches to motivate students' innovative ability by means of the integrated designing experiments.
Experiments on Cylinder Head Temperature Measurement in Thermal Energy and Power Measurement Course Stereoscopic Teaching Material Construction for Signal Detection and Estimation

Rui Huang,Xiaoli Yu,Keyu Qian,Junxuan Chen,Fenfang Chen,Xiaoqiang Chen

DOI: https://doi.org/10.13492/j.cnki.cmee.2019.15.019

2019-01-01

Abstract:In view of the lack of systematic experimental teaching in colleges and universities, the experimental design of graduate students is difficult, and the experimental methods are unreasonable. In the course of thermal energy and power engineering testing technology, experimental teaching modules are added to improve students' practical ability and cultivate students' scientific research literacy. Taking the engine cylinder head fire surface temperature test experiment as an example, systematic experiment teaching is carried out from system construction, equipment calibration, measuring point arrangement, bench experiment to error analysis and data processing. The practice results show that the engine cylinder head temperature measurement experiment teaching helps the students to understand and master the temperature testing process, and enhances the students' experimental skills and practical ability, laying a solid experimental foundation for the follow-up postgraduate research work. Abstract: The stereoscopic teaching material is development direction of teaching material construction in the information age. It is helpful in enriching teaching contents, developing new teaching mode and means, sharing teaching resources, advancing teaching ability. Firstly, the concept and function of stereoscopic teaching material are expatiated in this paper. Secondly, contents of the stereoscopic teaching material construction of signal detection and estimation are discussed. It is hoped that the stereoscopic teaching material could promote teaching reform and the advancement of teaching quality.
Improving on Teaching Effects of Thermodynamics, Heat Transfer and Fluid Mechanics

Chen Ai

2004-01-01

Abstract:According to teaching experience of these years on the course of Thermodynamics, Heat transfer and Fluid mechanics, the author contribute some idea on how to make this course simpler, easier and more in-teresting. The ways of improving teaching methods and cultivating creative thinking ability of students used in the teaching process are hoped to be helpful for us.
New Advancements in Heat and Mass Transfer: Fundamentals and Applications

Guojun Yu,Huihao Liu,Huijin Xu

DOI: https://doi.org/10.3390/en16073029

IF: 3.2

2023-03-27

Energies

Abstract:Heat and mass transfer, widely involved in various energy systems, has great impacts on the safety, efficiency, as well as performance of these systems [...]

energy & fuels
Design of heat and mass transferring simultaneously experimentation system

Li Ding,Chengqian Wang,Yong Peng,Lixin Yu

DOI: https://doi.org/10.16791/j.cnki.sjg.2014.07.011

2014-01-01

Abstract:Heat and mass transferring simultaneously is one of the basic forms of transmission .At present ,the chemical experiment teaching universally is focusing on the unit operation ,without a device used to study the process of heat-mass transferring simultaneously between gas and liquid .The design and building-up of such a device make experiments available ,in which the student is conduced to enhance understanding the phenomena and process of heat-mass transferring simultaneously .The device treats air/water as gas-liquid two phases contacting in a plate column ,which acts as the main place for heat-mass transferring .After setting up such a set of comprehensive experimental device ,the inlet water temperature and flow rate ,inlet-air temperature , humidity can be changed ,which can research the phenomenon and the process of gas-liquid contacting in different conditions ,and analyze qualitatively the application process .
The Application and Research of Heat Transfer Experiment Course Based on Computer Hybrid Learning Method

Chuan Ma,Xiaoyan Liu,Lijun Liu

DOI: https://doi.org/10.1088/1742-6596/1648/2/022026

2020-01-01

Journal of Physics Conference Series

Abstract:In heat transfer experimental course, there are very common that some students only record experimental data and copy others’ experimental reports. They do not need to preview before the class, and they do not need to think during the experiment. However, as an important practical subject in experimental teaching, heat transfer experiment course will seriously affect the output quality of Chinese college graduates. This paper firstly analyzes the existing problems in the heat transfer experimental course based on computer hybrid learning method. Then, this paper puts forward the teaching mode reforming of heat transfer experiment course based on computer hybrid learning method. Finally, this paper puts forward the computer teaching mode suitable for colleges and universities at the present stage, which is combining with teaching, experiment and examination.
Exploration of Independent-Research Teaching Approaches Based on Technical Literatures Perusal

谢磊,于玲,戴连奎,谢依玲,张光新

DOI: https://doi.org/10.3969/j.issn.1008-0686.2012.02.035

2012-01-01

Abstract:Process Control Engineering is a very practical course and offers a great platform to master expertise including control theory and measurement technologies.With this platform,a new independent education and teaching approach based on technical literatures perusal is explored.Students are supervised to learn the background and technical contributions of literatures,design and simulate control strategies,and write research reports.Finally,the classroom discussion is carried out under supervision of teachers.
Courses Integration of Engineering Mechanics and Fundamental Chemical Process Equipment

Lv Zao-sheng

Abstract:The reason for the integration of two courses,Engineering Mechanics and fundamental Chemical Process Equipment was explained,which was practiced by College of Chemical Engineering and Technology,Wuhan University of Science and Technology.The selection and integration of contents from the two courses was introduced.Some problems emerged in the teaching process were presented,and the solutions were put forward.

Engineering,Chemistry
5. Heat and Mass Transfer

Yu Zhiqing,Jin Yong

DOI: https://doi.org/10.1016/S0065-2377(08)60300-2

1994-01-01

Advances in Chemical Engineering

Abstract:null
Teaching Design and Practice of Physical Chemistry in Non-Chemistry Engineering Majors

Fangzhu Wang,Ting Zhou,Guodong Zhang,Yuhui Zhang,Xiufeng Wang,Zhiqing Zhang,Changwei Wang

DOI: https://doi.org/10.3866/PKU.DXHX201803034

2018-05-02

Abstract:: Based on the situation of China University of Petroleum (East China) and the students’ training characteristics, we have explored the reasonable teaching design on the basis of combining the theory and features of physical chemistry course with the practices, to facilitate chemical knowledge acquisition in non-chemical engineering majors. Teaching reforms such as using a variety of teaching methods and evaluation modes were employed in oil & gas storage and transportation engineering major, which has received significant teaching results.

Engineering,Education,Chemistry
Research and Practice on the Teaching Method Of"micro-Computer Control Unit and It'S Application"

刘玉玲,王晓萍,刘向东,刘旭

DOI: https://doi.org/10.3321/j.issn:1002-1582.2008.z1.111

2008-01-01

Optical Technique

Abstract:The teaching methods adopted in Micro-computer Control Unit and It's Application curriculum are discussed.In class teaching,theory is taught related with practice closely.In the practice ability training process,students do experiments from easy to advanced,from independent experiments to synthetic experiments.And also the grading ruler of this class is introduced.The effects and defects of the teaching methods are discussed.
Practice on teaching thought with "Theoretical-Virtual-Real"integration

Xiangqun Ye,Jiaojun Wang,Yan Shan,Fengqiu Chen

DOI: https://doi.org/10.16791/j.cnki.sjg.2017.05.001

2017-01-01

Abstract:The feasibility and practical meaning of the teaching method with "Theoretical-Virtual-Real" integration practice are carefully discussed during the process of a group of American students doing chemical engineering experiment by using the online cloud class with virtual simulation software.The research method mainlyincludes observation and discussion in the classroom as well as questionnaire survey.It's proven that the way of teaching by cloud class with virtual simulation software is a creative and effective improvement from traditional teaching method.It has a big advantage in saving educational costs and helping students to learn by themselves anywhere anytime.
Reflections on Teaching Content of Physical Chemistry for Engineering Course

Huang Yu-chen

Abstract:Based on the present circumstances of physical chemistry teaching for engineering majors,such as emphasis on theory,diminishment on practical problem,overmuch interdisciplinary course with the previous one and the lack of new theories,the innovation toward the course content and methods of the instructions of physical chemistry,i. e.,the choice of textbook,the adjustment of teaching content,the relationship with the previous course,the enhancement of the classical theory as well as the introduction of the frontier theory,etc.,were discussed.

Engineering,Chemistry
New Energy Science and Engineering (refrigeration and Air Conditioning) Undergraduate Experiment and Practice Teaching System Construction

Liu Zhongbao,Wang Qinghua,Ma Guoyuan,Sun Han

DOI: https://doi.org/10.3969/j.issn.1672-1438.2016.07.017

2016-01-01

Abstract:Based on the construction of the professional direction of thermal energy and Power Engineering (refrigeration), the characteristics of new energy science and engineering are deeply considered, experiment teaching system, practice teaching mode of new energy science and Engineering (refrigeration and air conditioning), etc. are investigated and practiced. This paper discusses and analyzes the experimental teaching idea of new energy science and Engineering (refrigeration and air conditioning), and examination of experimental teaching method, experimental course, and teaching effect.
Design and Application of Power Energy Simulation Experiment Teaching Systems

GAO Qi-rui,XUE Ya-li,LI Zheng

DOI: https://doi.org/10.3969/j.issn.1002-4956.2006.05.028

2006-01-01

Abstract:This paper briefly introduced the design of power energy simulation experiment teaching system developed by Thermal Engineering Department, Tsinghua University, as well as its application to student practice teaching. Through the teaching and practice based on simulation experiment system, students acquire the knowledge of actual engineering, improve practical operation skills, greatly promote their understanding and passion for power energy area , and cultivate team cooperation spirits. The experiment teaching system plays an important role in students' comprehensive quality- oriented and knowledge- based education.
Field Practise is a Good Training to the Professional Ability of HVAC Undergradu Ate Students

朱颖心

DOI: https://doi.org/10.3969/j.issn.1005-2909.2003.04.022

2003-01-01

Abstract:Practise is always a required course to most of the undergraduates of engineering. However, it is a harassment to many colleges or universities beca use it is a big difficulty in arranging such a teaching procedure and how to mak e it efficient. the author introduces some experiences of site practise of HVAC program in Tsinghua University. One of the best ways is to teach the students to solve the existing problems in HVAC system for building owners or users. Such a n experience may be helpful to other colleges or universities with HVAC program.
An exploration of innovative teaching mode of engineering mechanics facing 21st century

陈在铁,范钦珊,清华大学

DOI: https://doi.org/10.3969/j.issn.1008-3634.2001.02.026

2001-01-01

Abstract:The paper tentatively exploresthe necessity and urgency of establishing the innovative teaching mode of engineering mechanics from the following aspects: change of teaching concept, cultivation of students' self taught competence, promotion of students' innovative awareness and confidence, creation of a democratic teaching atmosphere, respecting and encouraging students to develop their own personality, combining theory with practice, etc.Based on the above points the paper then puts forth some ideas for the implementation of the innovative teaching mode of engineering mechanics.
Discussions on Experiment Teaching of Mechanical System Dynamics

Xin-ju Zhang

DOI: https://doi.org/10.2991/icemit-15.2015.81

2015-01-01

Abstract:As a theoretical and practical basic technical course for the students in the specialty of mechanics, mechanical system dynamics is one of the primary courses to train professional technical talent. In the meantime, experiment teaching of mechanical system dynamics is an important channel for undergraduate students to acquire basic experimental skills...
Dynamic Simulation of Heat and Mass Transfer Characteristics for Tube-finned Heat Exchangers under Dehumidifying Conditions

YAN Da-wei,WEI Peng

2013-01-01

Abstract:中国标准连续出版物号: ISSN 2095-4468 CN 31-1492/TB 广告经营许可证号:沪工商广字 3101034000088 号印刷单位: 上海天华印刷厂定价: 5.00 元/册目次 ▊设计与研究湿工况下翅片管换热器空气侧热质传递动态模拟 ···································· ·································································· 熊伟,庄大伟,胡海涛等 (01) 二氧化碳复叠式制冷系统实验研究 ··························· 陈林,张信荣 (06) 新型 CO2固气两相流循环制冷系统的可视化实验 ···· 陈林,张信荣 (12) 基于正交试验法的直接蒸发冷却器填料性能测试与分析 ························· ······································································ 霍海红,黄翔,殷清海 (19) R290 空调器的优化设计原则 ·············· 高晶丹,丁国良,王婷婷等 (23) 无动力 LNG 汽车加注装置 ········································ 杨文刚,陈杰 (27) 特种电子设备冷却系统设计与实验研究················ 侯春枝,钟根仔 (30) 中温热管换热器内传热特性的研究 ···· 翟笃棉,魏华锋,严大炜等 (34) 液体除湿空调系统中除湿塔的性能分析································ 王维国 (39) 可燃制冷剂的风险评估和降低风险措施···················································· ······························································ 钟志锋,张子琦,李小燕等 (45)

Various Methods of Teaching "heat and Mass Transfer: Fundamentals and Equipment"

Teaching of Chemical Engineering Thermodynamics Based on Aspen-Plus（Ⅰ）Homogeneous Property Calculation

Study on Designing Experiment Teaching Supporting Electrical Equipment Course

Experiments on Cylinder Head Temperature Measurement in Thermal Energy and Power Measurement Course Stereoscopic Teaching Material Construction for Signal Detection and Estimation

Improving on Teaching Effects of Thermodynamics, Heat Transfer and Fluid Mechanics

New Advancements in Heat and Mass Transfer: Fundamentals and Applications

Design of heat and mass transferring simultaneously experimentation system

The Application and Research of Heat Transfer Experiment Course Based on Computer Hybrid Learning Method

Exploration of Independent-Research Teaching Approaches Based on Technical Literatures Perusal

Courses Integration of Engineering Mechanics and Fundamental Chemical Process Equipment

5. Heat and Mass Transfer

Teaching Design and Practice of Physical Chemistry in Non-Chemistry Engineering Majors

Research and Practice on the Teaching Method Of"micro-Computer Control Unit and It'S Application"

Practice on teaching thought with "Theoretical-Virtual-Real"integration

Reflections on Teaching Content of Physical Chemistry for Engineering Course

New Energy Science and Engineering (refrigeration and Air Conditioning) Undergraduate Experiment and Practice Teaching System Construction

Design and Application of Power Energy Simulation Experiment Teaching Systems

Field Practise is a Good Training to the Professional Ability of HVAC Undergradu Ate Students

An exploration of innovative teaching mode of engineering mechanics facing 21st century

Discussions on Experiment Teaching of Mechanical System Dynamics

Dynamic Simulation of Heat and Mass Transfer Characteristics for Tube-finned Heat Exchangers under Dehumidifying Conditions