Abstract:The conventional method (CM) for shear lag analysis of thin-walled box girders supposes that the neutral axis coincides with the centroidal axis of the whole cross section, and thus neglects the axial equilibrium condition. An analytical method considering axial equilibrium and shear deformation, which is referred to as PM, is proposed for overcoming the defect of the conventional method. The longitudinal displacement of the web is introduced to satisfy the axial equilibrium condition and locate the neutral axis automatically. The shear deformation is considered according to the Timoshenko beam theory. Three independent shear lag functions are adopted for describing different shear lag intensities of the top, bottom and cantilever slabs. The governing differential equations for the displacement variables are deduced by means of the virtual work theorem and solved with the relevant boundary conditions. The analytical solution is then derived for the distance from the neutral axis to the top fiber of the cross section. The accuracy of the proposed method is validated by comparisons with the available experimental data as well as the finite element analysis results. Moreover, the distances from the neutral axis to the top fiber, axial forces, and stress difference ratios are analyzed for typical thin-walled box girders to quantify the influence of the axial equilibrium condition. Finally, an extensive parametric study is conducted to examine the effects of various geometric parameters on the stress difference ratio under different load types. The results show that the proposed method can provide good predictions for both deflections and axial stresses, and neglecting axial equilibrium leads to considerable underestimations of axial stresses especially at the top flange-web junctions over the interior support of the continuous box girder.

Analysis of free vibration characteristic of thin-wall box-girder considering shear lag and shear deformation

Analysis of Free Vibration Characteristics of Thin-walled Box Girder Based on Energy Variation Principle

Theoretical Research Of Shear Lag Effect In Thin Walled Box Girder

ENERGY-VARIATIONAL METHOD OF THE SHEAR LAG EFFECT IN THIN WALLED BOX GIRDER

Study Of Free Vibration Characteristic Of Continuous Box-Girder Based On Hamilton Principle

Analysis of Free Vibration Characteristic of Steel-Concrete Composite Box-Girder Considering Shear Lag and Slip

A High Precision Method for Analyzing the Shear Lag Effect on Thin Walled Box Gi Rder

Improved method for shear lag analysis of thin-walled box girders considering axial equilibrium and shear deformation

A Multi-factor Method for Analyzing the Shear Lag Effect on Thin Walled Curved Box Girder

A Mechanical Model of Thin Walled Curved Box Girder with Shear Lag Effect Based on Multi-Factor Analysis

Closed-form Solution to Thin-Walled Box Girders Considering Effects of Shear Deformation and Shear Lag

Dynamics Response of Thin-Walled Rectangle Box Girders Considering Shear Lag Effect

Dynamic Response Analysis for a Large Cantilever Rectangular Box Girder in Consideration of Shear Lag Effect

Analysis on Shear Lag Effect of Thin-walled Box Girder Based on Timoshenko Beam Theory

An Approach of Multi-parameter Warping Displacement Function for Natural Frequency Analysis of Thin-walled Box Girders

Improved Finite Beam Element Method for Analyzing the Flexural Natural Vibration of Thin-Walled Box Girders

MECHANICAL CHARACTERISTICS OF THIN-WALLED BOX GIRDER'S WEBS UNDER LATERAL FORCES

Study of Dynamic Response of Thin-Walled Straight Line Box Girder

Lateral Static and Dynamic Characteristics of Thin-Walled Box Girder

ENERGY-VARIATIONAL METHOD OF LATERAL STATIC ANALYSIS OF THIN-WALLED CURVED BOX GIRDERS

Short- and Long-Term Analyses of Shear Lag in Rc Box Girders Considering Axial Equilibrium