Abstract:Larger vibration and noise often exist in agricultural machinery due to the harsh working environment and high power. The rubbing machine is one of the indispensable pieces of equipment in the agriculture and livestock industry, and it is affected by the vibration of large constraints on its promotion and use. To reduce the vibration of the rubbing machine, the vibration characteristics of the spindle rotor were first analysed by modal simulation, thus determining the larger contributions to the spindle rotor vibration. Second, aluminium foam material was installed in the large deformation part of the spindle rotor. Its vibration reduction and energy absorption characteristics were used to optimise the vibration reduction design by increasing the damping. Third, a steel ball impact test was conducted to analyse the vibration characteristics of the optimised spindle rotor. The results show that the maximum impact accelerations were reduced by 28.4% and 64.75% in the axial and radial directions, respectively, and the impact energies were reduced by 67.3% and 90.65% in the axial and radial directions within 2 s of impact collision, respectively, indicating that the optimised spindle rotor damping increased significantly. In addition, the vibration reduction effect of the optimised rubbing machine was verified by a bench test. By measuring the change degree of the static component of the spindle rotor vibration, the axial, radial, and vertical vibrations of the spindle rotor were improved by 5.78%, 10.32%, and 23.96%, respectively. Therefore, optimising the spindle rotor with aluminium foam material can reduce the vibration generated during the impact of the material on the spindle rotor. The rubbing machine's vibration, damping, and energy absorption were also realised in real working conditions.

EXPERIMENTAL RESEARCH ON NOISE CONTROL OF LARGE-SIZED COLD SAW

Milling Flying Saw Control System Based on the Principle of Suppressing Vibration by Milling with Varying Milling Parameters

Simulation and Experimental Demonstration of Sound Field Control Using Beam Deflection

Experimental Research on Sound and Vibration Properties of Disk Saw Blade Under the Excited Radial Pulses

Experimental Research of Noise Control in the Fighter Cockpit Using Microperforated Panel Absorber Structure

Analysis and Control of Vibration and Noise Induced by Sliding-Friction of Silver-Based Alloy

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Prediction of Cutting Noise Sound Power from Large Size Cold Saw Machine

Experimental investigation for vibration reduction of surface-textured journal bearings

Theoretical and Experimental Investigation of Noise Control Based on Revolving Compressor DQX

Dynamics study and damping optimization of circular saw based on numerical simulation and experimental analysis

Experimental Study Of Noise Characteristics Of Submerged Exhaust Process

Study on control of the metal scraps dimension in vibration drilling

Experimental Study on Noise Reduction Effect of a Muffler Inserted in Liquid Transporting Pipeline

The Analysis of Dynamic Characteristics in Reduction of the Circular Saw Idling Noise

Progress of research on active noise radiation control with reflecting surfaces

Experimental Research on Milling Temperature of New Cold Saw Blade Milling Cutter

Experimental Research on Active Vibration Control of Flexible Cantilever Beam under Harmonic and Stochastic Excitation

Experiment Research of Rubber Powder's Vibration-isolation Function

Experimental Study on the Vibration Reduction Performance of the Spindle Rotor of a Rubbing Machine Based on Aluminium Foam Material

Design and Experiment Study of Ultrasonic Longitudinal-Torsional Compound Consolidation Vibration System for Metal Foil