Abstract:Slope deformation and failure is an inevitable engineering problem in highway construction and operation in mountainous areas. Its essence is a continuous–discontinuous gradual failure process of slope under the action of unbalanced force. Slope deformation and failure mechanism is the basis and key content of its emergency treatment and comprehensive treatment. In this study, the continuous–discontinuous element method (CDEM) and finite difference method are used to analyze the deformation mechanism and support the effect of a scattered slope in the Biwei Expressway. The results showed that the change in the local geological environment caused by roadbed excavation leads to slope slippage along the surface and then pulls the upper rock mass gradually to produce slippage failure, resulting in the stability gradually decreasing. The mechanism is traction sliding–tensile cracking. The continuous–discontinuous element method can effectively simulate the formation process of the main and sub sliding planes during excavation and can better display the phenomenon of slope failure and gradual disintegration. The emergency disposal of the gravity anti-sliding retaining wall in front of the slope can effectively control further deformation and ensure temporary stability. In comprehensive treatment, step-type slope excavation, gravity anti-sliding retaining wall, and anchor frame beam are adopted to control the deformation and failure of slope and ensure long-term stability. The numerical simulation results are consistent with the actual results, which effectively explains the rationality of this study. The research results of this study can provide some reference for the emergency treatment and comprehensive treatment of slopes in mountainous areas and for the construction and operation of highways and other infrastructure in mountainous areas.

Dynamic Numerical Analysis of High-Slope Deformation of Jin-Li-Wen Expressway at K81

Analysis of K103 Landslide Hazard and Its Complehensive Treatment Countermeasures on Hang-jin-qu Expressway

MECHANISM ANALYSIS OF LANDSLIDE INDUCED BY ACCUMULATION LOADING OF HIGHWAY

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Numerical Analysis on Deformation of Pavement and Soft Clay Ground Interaction for Cyclic Loads

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Synthetic Study Method of Dynamic Deformation Process of Landslide

Multi-Source Monitoring and Numerical Simulation Deformation on Highway Steep Slopes under Rainfall Effects

Large Deformation Finite Element Analysis on Excavated Slopes

Numerical Analysis of Dynamic Compaction Using Large Deformation Theory

Analysis of Deformation Mechanism of Landslide in Complex Geological Conditions

Dynamic analysis of side slope stability against deep sliding

ELASTOPLASTIC FINITE ELEMENT IMPROVEMENT OF IMBALANCED THRUST FORCE METHOD

Dynamic Analyses of Pipes in Saturated Soil under Traffic Loads

Failure Mechanism and Stabilization of a Basalt Rock Slide with Weak Layers

Investigation on Deformation Mechanism and Treatment Effect of a Scattered Slope Based on Continuum–Discontinuum Element Method and Finite Difference Method

Slope Analysis of Joint Roadbed by Strength Reduction FEM

Evolution process and failure mechanism of a large expressway roadside landslide

Study on Dynamic Evaluation Method of Stability of Slope Controlled by Structural Plane Based on Deformation Characteristics

Dynamic Limit Equilibrium Analysis of Sliding Block for Rock Slope Based on Nonlinear FEM

Force and deformation response analysis of dual structure slope excavation and support