ELASTOPLASTIC FINITE ELEMENT IMPROVEMENT OF IMBALANCED THRUST FORCE METHOD

Jian-cong XU,Yue-quan SHANG,Shu-ning ZHENG,Kan-fu CHEN

DOI: https://doi.org/10.3321/j.issn:1000-6915.2005.23.008

2005-01-01

Abstract:Connected with concrete engineering example of K111 debris landslide in Hangjinqu Expressway,it was investigated that how to combine mutually limit equilibrium method with FEM to be applied to analyzing slope stability and calculation of stability factor.Meanwhile,relationship between stability factor of slope and utilization degrees of the shear strength of sliding plane was also studied.The results are shown as follows:(1) the zone of plastic deformation and failure of slip-mass under approaching failure state can be obtained by the limit analysis method of elastoplastic FEM of slope stability;and then according to it,sliding plane of slope is determined;(2) it is shown that the sliding plane of slope determined by elastoplastic finite element limit analysis corresponds basically to the actual one revealed by field engineering geologic prospecting;(3) sections with different utilization degrees of shear strength are determined on the basis of plastic strain value under limit state of slope;(4),it can calculate more accurately the stability factor of debris slope with imbalanced thrust method that comprehensively thinks over the different utilization degrees of shear strength of soil and rock on sliding plane;(5) it is proven by analyzing concrete example that to combine elastoplastic finite element with limit equilibrium method may be very well used to analyze the stability of debris slope and calculate its stability factor;it can reflect the actual state of slope more accurately.Therefore,it provides a reference to the stability analysis,evaluation and forecast of this kind of landslides.