Design of Telecommunications System Based on 89C51 and Modem

毛兴鹏,戴伏生,徐勇

DOI: https://doi.org/10.3969/j.issn.1005-2992.2002.02.018

2002-01-01

Abstract:A new tel-communication method based on 89C51 is proposed,which allows a low cost data transmission that can be realized by using MODEM and E 2PROM.The historical data collected by Single Chip Microcomputer,which can be controlled by PC,may be transmitted to PC anytime.

What problem does this paper attempt to address?

Design of Intelligent Serial Communication Terminal in Distributed Control System

YU Zhao-kai,YAN Gang-feng

DOI: https://doi.org/10.3969/j.issn.1004-4345.2011.04.043

2011-01-01

Abstract:To meet the needs of establishing a dynamic adjustable serial communication network,an intelligent serial communication terminal is designed using the method of automatic identification of communication baud rate and frame format in blind environment.After communication settings of host computer,the terminal can automatically identify and follow the communication setting of host computer and establish communication with host computer.Industrial application has proved that the intelligent serial communication terminal designed by this method enhances greatly the flexibility of serial communication with its stable and reliable operation and interference rejection.
Implementation of Serial Communication between PLC and Single-chip Microcomputer

Cheng Liang,Lin Bin,Cha Lingzhi

DOI: https://doi.org/10.3969/j.issn.1000-3886.2006.03.013

2006-01-01

Abstract:This paper introduces serial communication between PLC and single-chip microcomputer with the example of S7-226 PLC and AT89S51 MCU.Detailed explanation of hardware configuration and program design in this communication system is given.The design project in paper has been applied successfully in automatic pill-filled machine.
Design of Invoice Remote Printing System Based on Modem

张洪健,何平,刘晓萍,戴鹏

DOI: https://doi.org/10.3969/j.issn.1009-9492.2008.12.023

2008-01-01

Abstract:Applied an AT89S52 MCU as the main-control chip,an invoice remote printing system was designed.The system uses embedded modem for remote data transmission and extending IS61LV5128 for data storage,the function of controlling the printer to achieve the invoices remote printing through the PSTN is realized.Application shows that it effectively utilizes the PSTN as the communication medium,greatly reduces the cost and has high performance price ratio.
Application of Mobus Protocol to Data Collection Instrument

曹祁,王晓萍,郭振武

DOI: https://doi.org/10.3969/j.issn.1001-4551.2004.06.014

2004-01-01

Abstract:This paper represents the application of data collection instrument, which is based on 89C51 microprocessor, including the design of RS485 interface circuit and the way to accomplish Modbus protocol.
Design of Wireless Communication System Based on nRF905

Zhou Chao,Wang Chen

2009-01-01

Abstract:This paper introduces a wireless communication module based on Atmega128L of Atmel and single-chip RF transceiver chip nRF905 of Nordic,and introduces the system working principle,hardware design and software design,and gives out the main procedures. This system has Advantages of low cost,easy expansion,easy operation,etc.,can be widely used in remote control,wireless data collection and other fields.
The Design and Realization of Remote Monitor and Control System Based on SMS

朱万贵,郑国君,顾新建

DOI: https://doi.org/10.3969/j.issn.1009-0134.2003.12.009

2003-01-01

Abstract:Remote monitor and control technology is a pop topic in modern manufacturing; Shortmessage is one of the up to date technology and it owns many merits. Such as: easydevelopment、low cost、free service、high reliability and so on. In this paper we discussthe theory and operation of SMS in GSM Net and do some research on the design andrealization of Remote Monitor and Control System base on SMS in manufacturing.
Analysis and Design of Home Gateway in Smart Home System

张明杰

DOI: https://doi.org/10.3969/j.issn.1671-1815.2009.07.060

2009-01-01

Abstract:Base on using the 89C-51 monolithic integrated circuit as the micro controller,and taking the network controller by network card TE-2008 main chip RTL8019AS,one kind of the home gateway scheme is proposed through which the home network can communicate with the Internet.It has been carried on for the principle,the software procedure,and the communication protocol being analysized about the scheme.
New Programme Design of High-Capacity Data Transmission Based on WinCE System

任云,师奕兵,付在明

DOI: https://doi.org/10.3969/j.issn.1000-8829.2009.12.022

2009-01-01

Abstract:A design of remote-control software targeted at embedded measuring instrument,which is based on the model of Client/Server network communication with Socket is represented.Some key technologies over network communication field are discussed in detail,such as TCP/UDP protocol,non-blocking,select I/O pattern and multi-thread synchronization.A practical application of remote-control software for pulse/data generator is provided to verify the feasibility and validity of this design.
GSM Modem Message Development While Long-Range Observing and Controlling

Hui LOU,Hai HUANG

DOI: https://doi.org/10.3969/j.issn.1005-9490.2006.01.066

2006-01-01

Abstract:In order to realize the accurate and swift transmission of long-range data, we have adopted the way of steady and widely covered GSM SMS, the MCU 89C52 can easily and effectively control the GSM Modem through Serial COM, MCU and GSM Modem using AT command to achieve control and data exchange. And we compared the different modes and the data format of SMS, chose the PDU mode with large data capability and wide use, and realized long-range data transmission.
A simple digital SPC system based on AT89C51

Lan LIU,Wei-na CAI

DOI: https://doi.org/10.3969/j.issn.1009-2552.2005.04.011

2005-01-01

Abstract:This paper introduces a simple time division switching system based on AT89C51. The system can perform the basic functions of a telephone call handing. There is a detailed explanation for the operational principle,design of hardware and software.
In System Programming Design of 51 Microcontroller Base on USB Interface

Chen Zhi-ying

Abstract:The paper presents a design of 51 microcontroller AT89S51/52/53 in system programming base on USB interface,emphasis on the hardware design of USB-SPI interface circuit and the design of PC software for microcontroller programming by VB.The design has many advantages such as small size,low power consumption,high reliability etc.It is very valuable in the applications of 51 microcontroller and is worth references as well.

Computer Science,Engineering
Design of a Digital HF Modem

Jinyao LIANG,Longyu PAN,Lianghui DING,Feng YANG,Liang QIAN

DOI: https://doi.org/10.3969/j.issn.1001-893x.2015.11.017

2015-01-01

Abstract:In order to realize digital high frequency(HF) communication with high speed,reliability and easy operation,this paper designs an HF modem based on computer. The end-to-end platform design pro-vides reliable HF signal transmission. Analog HF radio stations provide transmitter antenna and receiver antenna. Computer soundcard is used to be the analog-to-digital/ digital-to-analog module and computer CPU is the core for signal processing. According to the power limitation character of HF communication, constant envelope modulation or Gaussian Filtered Shift Keying ( GMSK) is chosen in design. To realize fast and accurate time synchronization,a new frame structure with multiple short training sequences inserted in is proposed. Both of the simulation results and the real tests show that 10-5 bit error rate( BER) is a-chieved in 15 dB signal-to-noise ratio(SNR) with low data speed. The modem meets the need of HF communication.
Meter Romote Copying System Based on the Wireless Network

高冬花,孙克辉,盛利元

DOI: https://doi.org/10.3969/j.issn.1006-2394.2005.01.029

2005-01-01

Abstract:A system based on wireless network is composed of electricity meter, data acquiring and displaying, data collecting, communicating and controlling, short message receiving and sending. GSM network and computer. Among these parts AD7755 is the core of the electricity meter, and data transmitting and controlling is completed by means of AT89S51 transmitting AT command to GSM module.
Design of simplex wireless call and data transmit system based on MCU

Li Jie

Abstract:Based on MCU, a simplex wireless call and data transmit system is designed by analog frequency modulation technique. In the frequency interval of 30～40 MHz, the transmittal of long distance and simplex by small power that voice signals are inputted through microphone and line is realized. The host and subordinate machines can undertake smart communication by frequency shift keying(FSK)modulation mode. There are 256 subordinate stations in our architecture, forming a one-to-multiple point, simplex, wireless call system. There is no obvious distortion and low bit error rate during transmittal. The number of subordinate stations can optionally change, while the host station can selectively or wholly dial-up. Data transmits while voice signals communication in this system. The English words, Chinese characters, short messages and station number will be displayed on liquid crystal display(LCD).

Computer Science,Engineering
Study and realization of the method of data transmission in vehicle monitoring system

Hou Ting,Ma Zilong

DOI: https://doi.org/10.3321/j.issn:0254-3087.2006.z1.215

2006-01-01

Abstract:The application of the GPRS data transmission has become the focus of GPS vehicle monitoring and automatic reading meter system.This paper analyzes the advantage of vehicle monitoring system used GPRS communication technology,and provides how to design the hardware and software of the mobile terminal by AT89S51 microchip and WAVECOM Q2406B modem.
Design of Conversion Module Between RS-232/485 with Mutifunction Based on Single Chip Microcomputer PIC18F6620

WANG Xiao-hua,CHEN Pei-you,TONG Wei-ming

DOI: https://doi.org/10.3969/j.issn.1001-5531.2006.11.006

2006-01-01

Abstract:A design method of one kind of conversion module between RS-232 and RS-485 with many functions based on single chip microcomputer PIC18F6620 was introduced.The main function of the module was expounded briefly.The hardware structure and flow chart of software were offered.The design method and principles of each main part were discussed in detail.The results of application show that the module has high value used in industrial application.
Design of Emodem's Software and Hardware on the Embedded Equipment

HU Dong-nj,HUANG Hai

DOI: https://doi.org/10.3969/j.issn.1001-1390.2005.09.014

2005-01-01

Abstract:This paper introduces the Embedded-Modem's operation principle,and e nlarges upon the design of the interface between eModem and the development-boar d based on s3c44b0x,and the program of the eModem's driver based upon the ucLi nux operation system.
The New Design System of Minicomputer for the Taxi-meter

MA Hongwen

DOI: https://doi.org/10.3969/j.issn.2095-347x.2005.06.026

2005-01-01

Abstract:This article introduces how to design a taximeter based on single-chip computer AT89C51 and equipped with peripheral of 8279, 7407, 75451 intelligentized chips. Hardware-circuit diagrams and main program flow chart are gived. This article also discusses how to solve key problems in the process of designing software and hardware system. Experiments have proved that this system has satisfied all requirements of the taximeter that can record distance, time and calculate fare and store, examine, accumulate data.
Design on Wireless Transmission Voice Acquisition System

QIN Yuanxun,LIANG Weiqian,LIU Runsheng

DOI: https://doi.org/10.3969/j.issn.1002-8684.2012.01.015

2012-01-01

Abstract:Based on low-power wireless protocol 802.15 and G.721(ADPCM),this subject develops a wireless transmission of voice control and signal acquisition system with voice capture,wireless transmission,USB device functions,using NRF24L01 as RF modulator,8051F206 as MCU,CY7C68013 as USB device controller.The system with small size and low power consumption can provide high quality voice signal and high data transfer rate.
Application and research of reliable data transmit based on the GPRS network

ZHANG Xiao-bo,LI Gang

DOI: https://doi.org/10.3969/j.issn.1007-984X.2006.01.017

2006-01-01

Abstract:This paper introduces a method,which embeds the TCP/IP protocol in the 51 microchip to realize the reliable point to point data transmit through GRPS network.The application used P89C51RD chip which extends 32K RAM as TCP/IP data packet buffer and 1M Flash to store data and WAVECOM Q2403A GPRS module.

Design of Telecommunications System Based on 89C51 and Modem

Design of Intelligent Serial Communication Terminal in Distributed Control System

Implementation of Serial Communication between PLC and Single-chip Microcomputer

Design of Invoice Remote Printing System Based on Modem

Application of Mobus Protocol to Data Collection Instrument

Design of Wireless Communication System Based on nRF905

The Design and Realization of Remote Monitor and Control System Based on SMS

Analysis and Design of Home Gateway in Smart Home System

New Programme Design of High-Capacity Data Transmission Based on WinCE System

GSM Modem Message Development While Long-Range Observing and Controlling

A simple digital SPC system based on AT89C51

In System Programming Design of 51 Microcontroller Base on USB Interface

Design of a Digital HF Modem

Meter Romote Copying System Based on the Wireless Network

Design of simplex wireless call and data transmit system based on MCU

Study and realization of the method of data transmission in vehicle monitoring system

Design of Conversion Module Between RS-232/485 with Mutifunction Based on Single Chip Microcomputer PIC18F6620

Design of Emodem's Software and Hardware on the Embedded Equipment

The New Design System of Minicomputer for the Taxi-meter

Design on Wireless Transmission Voice Acquisition System

Application and research of reliable data transmit based on the GPRS network