Abstract:Piston ring sealing is of great importance in oil-free reciprocating compressors for high pressure application. Pressure distribution and frictional heat on piston rings have been investigated with the aim of finding the key factors influencing the life time of piston rings. A mathematical model simulating the unsteady flow within the gaps of piston rings was established to present the pressure distribution and disclose the mechanism of the uneven abrasion of different rings. Meanwhile, the test rig was built to validate the mathematic model, on which the pressure distributions between the piston rings were measured using pressure sensors. The results showed that the severe non-uniformity of the pressure distribution between piston rings was suggested to be the root cause of premature failure of the sealing rings. The pressure distributions between the rings were always dramatically nonuniform with the same ring cut, and the first ring afforded more than 75% of the total pressure difference. Then the method to equalize the pressure difference through each ring was proposed by re-distributing the cutting size of each ring, and it was also validated experimentally. Another factor that influenced the life time of piston ring was the high temperature caused by the frictional heat, so this paper also investigated the frictional heat generation and conduction between piston rings and cylinder by the Finite Element Method.

Strength Analysis for Piston Ring of 6B5C_2.90 Compressor Based on Finite Element

Characteristics and mechanisms of turboshaft engine axial compressor casing containment

Numerical Analysis of Sealing Band on Valve Plate in Piston Pump

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Finite Element Simulation of Stress Field and Fatigue Analysis of Piston in Trans-critical CO2 Compressor

Mechanical Analysis for Fracture of Piston Rod of Dw-160/4.5 Reciprocating Compressor

Formation of a designed compressor piston ring profile during operation

Stress Analysis on Piston of Two-side Swashplate Compressor

Finite Element Analysis on Piston of Axial Piston Pump Based on Virtual Prototype

Analysis of material fault of O-ring seal in aircraft cylinder

STRENGTH ANALYSIS AND STRUCTURE IMPROVEMENT OF THE CA488 PISTON

Fracture analysis on piston of swash plate compressor for automotive air conditioner

Finite Element Analysis for the High Pressure Rotary Cylinder Block

FEM Analysis of Reciprocating Compressor Crankshaft at Variable Working Condition

Finite Element Analysis of the Cylinder Bore Deformation of Refrigerator Compressor

Thermal Expansion Failure of Self-Lubricated Piston Rings

Failure Analysis of a Failed Connecting Rod Cap and Connecting Bolts of a Reciprocating Compressor

FEM Analysis of 6M32A Nitrogen-hydrogen Compressor Crankshaft

Finite element analysis for the crankshaft of the piston compressor

Investigation of Pressure Distribution and Frictional Heat on Self-Lubricated Piston Rings in Reciprocating Compressors

Study on Strength Reliability of Actuator Piston Parts