Abstract:An effective way for improving the global load-carrying capacity of a steel arch with a welded hollow section is to increase the height of its webs. However, the high and thin web may buckle locally, which will affect the global load-carrying capacity and should be taken into account in predicting the global strength of the arch. This paper presents a numerical investigation for the in-plane strength and design for pin-ended circular steel arches with a welded hollow section, focusing on the effects of web local buckling by the large deformation inelastic analysis in association with a finite shell element model. The circular steel arches subjected to a radial load uniformly distributed along the arch length, a load uniformly distributed over the full span of the arch, or/and over the half span of the arch and their various combinations are considered in the investigation of their failure modes and strengths. The initial global and local geometric imperfections as well as residual stresses are included in the finite element model. It is found that web local buckling influences the global strength of the steel arches significantly and needs to be accounted in formulate their strength design formulas. The parameters related to the web local buckling and global buckling of the arch are thoroughly explored. It is found that the stability coefficients of arches under the nominal uniform axial compression are related to the equivalent normalized web height-to-thickness ratio of the cross-section and the normalized slenderness of the arch, and accordingly the design formula of the stability coefficients is proposed by including their effects. In addition, a design formula for predicting the strengths of the arches under a load uniformly distributed over the full span is developed by introducing a corrective coefficient into the stability coefficient, and it is found that the corrective coefficient is related to the arch rise-to-span ratio and slenderness of the arch. Furthermore, a general interaction design formula is developed for predicting in-plane strength of the arches under general in-plane loading such as a load uniformly distributed over the half span of the arch and various combinations of a full span uniform load and a half span uniform load. Comparisons with the finite element results demonstrate the proposed design formulas can provide good predictions and/or lower bound predictions for the strengths of the steel arches with a welded hollow section.

Study on the affecting factors on the spatial bending load of the arm of steel arch-gate

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Study on Space Stress Characteristic and Carrying Capacity of Butterfly Arch

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

IN-PLANE ELASTIC BUCKLING OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORT

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Elastic Lateral–torsional Buckling of Circular Arches Subjected to a Central Concentrated Load

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Elastic and Inelastic Stability of a Steel Arch Subjected to a Crown Point Load under an Elevated Fire Environment

Strength Design of Pin-Ended Circular Steel Arches with Welded Hollow Section Accounting for Web Local Buckling

Out-of-plane Inelastic Stability of Circular Arches under Bending Moment

Study on Finite Element Analysis of Arch Dam by Deformation Assumptions Based on of Arch-beam Load-distributed Method

Stability Analysis Of Multi-Circular Steel Arches With Variable Box-Section

Theoretical and experimental studies of in-plane stability design of circular arches subjected to axial force and moment

In-plane buckling analysis of the horsizontal spring circular arch under concentrated load at the mid-span

In-plane stability behaviours and design of web-opened steel arch

In-plane nonlinear buckling analysis and design method of concrete-filled steel tubular catenary arches

Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches

Reliability and sensitivity analysis for lateral stability of concrete filled steel tubular arches