Abstract:The paper is aimed to present its methods for preparing four kinds of modified activated carbons under the different temperature conditions to protect the nitrogen atmosphere.For the research purpose,we have examined their surface physicochemical properties in a variety of approaches,such as the application of a gas adsorption analyzer,a Boehm titration,a scanning electronmicroscope (SEM) and the Fourier trans tormed infrared spectroscopy (FTIR).At the same time,we have also done the isothermal adsorption experiments under the conditions with carbaryl being used as the adsorbate.Besides,this paper has also made an exploration of the associated relation between the adsorption power and the physicochemical properties of the activated carbons.The results of the above experimental studies show that the thermal treatment of the activated carbon is in a position to change the physicochemical properties of its surface.For instance,it can promote the decrease of the oxygen content of the carbon surface and the acidic functional groups whereas the surface area and the basic composition of the activated carbons can help to increase themselves significantly,too.Moreover,the SEM analysis indicates that the pore number and volume can be found increased due to the activated carbons expansion with the rising of the temperature.What is more,the analysis results of FTIR experiment prove to be consistent with the results of the Boehm titration.In addition,the adsorption capacity of the activated carbons has been found strongly correlated with their surface area,pore volume,and the surface acidic functional groups while the oxygen content of the surface area and pore volume can help to improve the adsorption capacity of the activated carbons.On the contrary,the acidic functional groups and the oxygen content just behave oppositely.More exactly speaking,the experimental data indicate that the optimal modification temperature should be set up at 600℃.The adsorption behavior of the activated carbons has also been found consistent with the pseudo-second-order kinetic model and that of the Langmuir isotherm.And,finally,the adsorption capacity of all kinds of adsorbents proves to be greater than 8 kJ/mol,signifying that the adsorption process has been dominated by the chemical adsorption.The fitting data of the intraparticle diffusion reveals that the adsorption rate of the activated carbons is not rn()erely controlled in the liquid film diffusion stage.

Study on Behavior of Adsorbing CS2 by Activated Carbon Using Static State Weight Method

ADSORPTION MODELS FOR MIXED GASES OF CS_2 AND CO_2 ON ACTIVATED CARBON

STUDY ON THE MECHANISM OF GRANULAR ACTIVATED CARBON TO ADSORB DIMETHYL TRISULFIDE AND β-CYCLOCITRAL

Study On The Adsorption Behavior For Cs2 On Alumina Catalysts

Adsorption of Carbon Dioxide on Activated Carbon

Simulation Study for the Adsorption of Carbon Disulfide on Hydroxyl Modified Activated Carbon

The adsorption of Sb(Ⅲ) in aqueous by KMnO_4-modified activated carbon

Adsorption of 2,4-Dichlorophenol from Aqueous Solution Onto Microwave Modified Activated Carbon: Kinetics and Equilibrium

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

Adsorption characteristics of SO2 onto novel activated carbon fixed bed: kinetics, isotherms, thermodynamics and washing regeneration

An Adsorption Kinetic Model for Sulfur Dioxide Adsorption by ZL50 Activated Carbon

Activated carbon-based CO2 uptake evaluation at different temperatures: The correlation analysis and coupling effects of the preparation conditions

Physisorption of SO 2 by carbonaceous model adsorbents with tunable hierarchical pore configurations: Experiment and simulation

Effect of Powder Activated Carbon Circulation Rate on SO2 Adsorption

Analysis of adsorption characteristics of 2,4-dichlorophenol from aqueous solutions by activated carbon fiber.

Experiment and Kinetic Model Study on Modified Potassium-Based CO2 Adsorbent

Adsorption of Carbon Disulfide on Cu/CoSPc/Ce Modified Activated Carbon under Microtherm and Micro-oxygen Conditions

On the adsorptive performance of carbaryl onto the activated carbons with the thermal treatment

Preparation of polyacrylonitrile-based activated carbon fiber for CS2 adsorption

Kinetics of SO2 Adsorption by ZL50 Activated Carbon for Various Water Vapor Volume Fractions

Static and Dynamic Simulation of Single and Binary Component Adsorption of CO2 and CH4 on Fixed Bed Using Molecular Sieve of Zeolite 4A