Abstract:A fully-integrated complementary metal-oxide semiconductor (CMOS) sensor for combined temperature and humidity measurements is presented. The main purpose of the device is to monitor the hermeticity of micro-packages for implanted integrated circuits and to ensure their safe operation by monitoring the operating temperature and humidity on-chip. The smart sensor has two modes of operation, in which either the temperature or humidity is converted into a digital code representing a frequency ratio between two oscillators. This ratio is determined by the ratios of the timing capacitances and bias currents in both oscillators. The reference oscillator is biased by a current whose temperature dependency is complementary to the proportional to absolute temperature (PTAT) current. For the temperature measurement, this results in an exceptional normalized sensitivity of about 0.77%/°C at the accepted expense of reduced linearity. The humidity sensor is a capacitor, whose value varies linearly with relative humidity (RH) with a normalized sensitivity of 0.055%/% RH. For comparison, two versions of the humidity sensor with an area of either 0.2 mm2 or 1.2 mm2 were fabricated in a commercial 0.18 μm CMOS process. The on-chip readout electronics operate from a 5 V power supply and consume a current of approximately 85 µA.

A Temperature & Humidity Measurement and Control ASIC

Design for Digital Humidity Measurement and Control Based on Saving Circuit

Design and Realization of Temperature Limiter Measurement and Control System

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

CMOS Digital Temperature Sensor with Self-Correcting Technique

Temperature and Humidity Measurement System Based on FPGA and SHT21

Design Of Single Chip Integration Of Mwnts/Sio2 Humidity Sensor And Its Interface Asic

The Measure and Control System Design for Temperature and Humidity in General Storeroom

Temperature Control Circuit Measurement System Based on FPGA

Temperature and Humidity Control Based on P89LPC920FDH

The Implementation of Low Power SoC Chip and Solution for Infrared Temperature Measurement

Design of Conductive MWNTs/SiO<sub>2</sub> Humidity Sensor Interface ASIC Based on AC Signals

Design of conductive MWNTs/SiO2 humidity sensor interface ASIC based on AC signals

A CMOS Smart Temperature and Humidity Sensor with Combined Readout

Intelligent control and implementation of a new type constant temperature and humidity box

Performance Study of a Constant Temperature and Humidity Air-Conditioning System with Temperature and Humidity Independent Control Device

Wireless Sensing System-on-Chip for Near-Field Monitoring of Analog and Switch Quantities

A Design of Two-Wire Capacitive Humidity Lever Transmitter Based on MSP430

Monolithically and Vertically Integrated Environmental Sensing Hub with Novel Air-Based Humidity Sensor Design

Design of a Digital Temperature Measurement Circuit and Its Implementation

Design and Simulation of an Application Specific IC for Intelligent Measurement