Study on the synthesis of air dry water-based alkyd resin

Xian-hong ZHOU,Teng YUAN,Tao ZHAO,Feng WANG,Wei-ping TU
DOI: https://doi.org/10.13650/j.cnki.rgxsz.2014.04.001
2014-01-01
Abstract:The trimellitic anhydride( TMA) was used to synthesis the water- based alkyd resins. The effect of each factor on the properties of product resin was investigated by the testings of film properties and FT- IR analysis. The results showed that the optimum synthesis conditions were as followed: using linseed oil,glycerol,phthalic anhydride and TMA as raw materials,molar ratio of oil and glycerol 1∶ 2. 07,oil length 45%- 50%,excessive polyalcohol 7%,final acid value( KOH) 50- 55 mg /g and 0. 04wt% LiOH as alcoholysis catalyst. The esterification temperature of PA was 180 ℃ at first and then was heated to 235 ℃ at the rate of 20 ℃ /h. The esterification temperature of TMA was 170- 180 ℃. The propylene glycol monomethyl ether and N,N'- dimethyl ethanolamine were usd as cosolvent and neutralizer,respectively. The neutralization was controlled at 100% and the pH value of product was about 7. 5- 8. A transparent brown water- based alkyd resin was finally obtained and its drying properties,gloss,hardness,flexibility and other properties were very well.
What problem does this paper attempt to address?