Abstract:Flat-field concave diffraction grating is the key device of a portable grating spectrometer with the advantage of integrating dispersion, focusing and flat-field in a single device. It directly determines the quality of a spectrometer. The most important two performances determining the quality of the spectrometer are spectral image quality and diffraction efficiency. The diffraction efficiency of a grating depends mainly on its groove shape. But it has long been a problem to get a uniform predetermined groove shape across the whole concave grating area, because the incident angle of the ion beam is restricted by the curvature of the concave substrate, and this severely limits the diffraction efficiency and restricts the application of concave gratings. the authors present a two-step method for designing convex gratings, which are made holographically with two exposure point sources placed behind a plano-convex transparent glass substrate, to solve this problem. The convex gratings are intended to be used as the Master gratings for making aberration-corrected flat-field concave gratings. To achieve high spectral image quality for the replicated concave gratings, the refraction effect at the planar back surface and the extra optical path lengths through the substrate thickness experienced by the two divergent recording beams are considered during optimization. This two-step method combines the optical-path-length function method and the ZEMAX software to complete the optimization with a high success rate and high efficiency. In the first step, the optical-path-length function method is used without considering the refraction effect to get an approximate optimization result. In the second step, the approximate result of the first step is used as the initial value for ZEMAX to complete the optimization including the refraction effect. An example of design problem was considered. The simulation results of ZEMAX proved that the spectral image quality of a replicated concave grating is comparable with that of a directly recorded concave grating.

Manufacturing of High Efficient Holographic Diffraction Gratings

Design of Large-Deflection-angle High-Diffraction-efficiency High-Dispersion Hybrid Gratings

A Method To Fabricate Convex Holographic Gratings As Master Gratings For Making Flat-Fied Concave Gratings - Art. No. 68320w

A method to fabricate convex holographic gratings as master gratings for making flat-field concave gratings

Fabrication of a New Type of Transmission Grating with Holography Interferometry and Wet Anisotropic Etching

61-4: Holographic Diffuser Design for Multi-band Beam Shaping

Diffractive grating of high efficiency produced by binary optics

Direct Design Method for Holographic Grating Imaging Spectrometer and Corresponding Recording System

Research on manufacturing technology of nanoimprinted grating

VUV and Soft X-Ray Diffraction Grating Fabrication by Holographic Ion Beam Etching

Study of Computer-generated Hologram Grating Scanner

Fabrication of Optical Mosaic Gratings by Consecutive Holographic Exposures Employing A Latent-Fringe Based Alignment Technique

Study on the Fabrication of Blazed Grating with Sub-Micrometer Space on Aluminum Film

Application of Broad-Beam Scanning Exposure to Fabricate Low-Wavefront-error Holographic Gratings

The fabrication of high-performance diffraction gratings via vibration-assisted UV nanoimprinting lithography

Design Method of Convex Master Gratings for Replicating Flat-Field Concave Gratings

Efficient coupling to a waveguide by combined gratings in a holographic waveguide display system

P‐98: Incorporating Space‐variant Holographic Grating in Waveguide Display

Fabrication of UV Transmission Blazed Gratings by Holography-Ion Beam Etching

Fabrication of Large Grating by Monitoring the Latent Fringe Pattern

Optical Mosaic Gratings Made by Consecutive, Phase-Interlocked, Holographic Exposures Using Diffraction from Latent Fringes