The investigation and analysis of occupational hazards in welding workplace in Weibin District of Baoji
Jian-chao LU,Hai-feng YANG,Hui CHAO,Hong-ying LIU,Zhong-li WANG,Man-ying DIAO,Zhi-dong KANG,Qiang GUO,Xin-mei HU,Li ZHAO
DOI: https://doi.org/10.13692/j.cnki.gywsyzyb.2017.05.003
2017-01-01
Abstract:Objective To understand risk factors for occupational disease in welding work workplace,in order to put forward specific protective measures of occupational safety for the welding workers.Methods Field survey of occupational hygiene and individual sampling at the welding work sites for testing concentrations of manganese dioxide and welding smoke were conducted.Results Among the 106 sampling spots in more than 20 enterprises in Weibin District of Baoji,the highest concentration of the manganese dioxide was 1.20 mg/m3,a minimum of 0.001 mg/m3,with a mean of 0.13 mg/m3.The percent of equal to or lower than the national standard was 77.4%,82 spots were higher than the national standard,and its highest level was seven times than the national standard.Of 1 2 1 welding soot were monitored in the workplace,the highest of the concentration was 1 5.3 mg/m3,a minimum of 0.1 9 mg/m3,with a mean of 3.25 mg/m3.The percent of equal to or lower than the national standard was 71.9%.87 spots were higher than the national standard,and its highest level was 2.83 times than the national standard.The noise at 97 workplace were monitored.The highest noise intensity was 103.6 dB(A)and the minimum was 66.5 dB(A), with mean of 85.66 dB(A).63 spots were higher than the national standard.The percent of equal to or lower than the national standard was percent of pass was 64.95%,the highest noise intensity was over the standard than1 8.6 dB(A).Manganese dioxide exposure levels at the automatic welding spots were lower than that of manual welding, the difference was statistically significant(P < 0.01).The highest level was at the workers'hand welding position,then followed by submerged arc welding,carbon dioxide protection welding, high frequency welding.The difference was statistically significant(P <0.01).The highest level of the exposure to welding soot was in the automobile manufacturing industry,the second was the special equipment manufacturing,and the lowest was in the electrical manufacturing(P<0.05).The exposure levels from the welding depended on the different kinds of welding technology such as the hand welding(the highest), submerged arc welding,carbon dioxide protection welding,high frequency welding then argon arc welding (the lowest).The difference was statistically significant(P<0.05).The exposure level of welding smoke and dust were closely related to the good or bad entire room ventilation's and presence of the local ventilation at workshops(P<0.01,P<0.05).The noise intensity in the welding places of the large enterprises was lower than the small and medium-sized enterprises(P<0.05).Conclusions It was found the lower percent of equal to or lower than the national standard about the manganese dioxide,the welding smoke,and noise in welding workplaces,and there were obvious occupational hazards.Local ventilation has significant importance to reduce welding smoke and dust exposure level.