Numerical Computation of Crystalline Microstructure

李治平

DOI: https://doi.org/10.3969/j.issn.1000-0917.2003.03.001

IF: 1.675

2003-01-01

Advances in Mathematics

Abstract:A surrey is made on the recent development of the numerical computation of crystalline microstructure based on the geometrically nonlinear theory. Typical numerical methods based on convexification, mesh transformation and discontinuous finite element method are discussed.

What problem does this paper attempt to address?

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Lesheng Hu,Shuifu Chen

DOI: https://doi.org/10.4028/www.scientific.net/amr.194-196.972

2011-01-01

Advanced Materials Research

Abstract:This paper presents a numerical strategy for realistic modelling of the internal material configuration and cracking of concrete on mesoscale. Polyhedron shapes resembling crushed rocks are adopted to represent the aggregate. A packing approach in which the particles are heaped up layer by layer is proposed for 3-D condition. A cubic representative volume element (RVE) is generated using the method. The cohesive approach, in which zero thickness cohesive elements are inserted into the ordinary finite element mesh along the potential cracking path, is adopted to model the cracking developing process. The cracking behaviours of created RVE under uniaxial tension are well simulated using the current approach.
Rotational Transformation Method and Some Numerical Techniques for Computing Microstructures

ZP Li

DOI: https://doi.org/10.1142/s0218202598000445

1998-01-01

Abstract:A rotational transformation method and an incremental crystallization method are developed to overcome some of the difficulties involved in the computation of microstructures. The numerical method based on these techniques has proved to be convergent. To increase further the accuracy of the computation, a technique is applied to remove the boundary effect of the numerical solutions. Numerical results for a double well problem are given to show the efficiency of the techniques.
Grain Extraction and Microstructural Analysis Method for Two-Dimensional Poly and Quasicrystalline Solids

Petri Hirvonen,Gabriel Martine La Boissoniere,Zheyong Fan,Cristian Vasile Achim,Nikolas Provatas,Ken R. Elder,Tapio Ala-Nissila

DOI: https://doi.org/10.1103/physrevmaterials.2.103603

IF: 3.98

2018-01-01

Physical Review Materials

Abstract:While the microscopic structure of defected solid crystalline materials has significant impact on their physical properties, efficient and accurate determination of a given polycrystalline microstructure remains a challenge. In this paper, we present a highly generalizable and reliable variational method to achieve this goal for two-dimensional crystalline and quasicrystalline materials. The method is benchmarked and optimized successfully using a variety of large-scale systems of defected solids, including periodic structures and quasicrystalline symmetries to quantify their microstructural characteristics, e.g., grain size and lattice misorientation distributions. We find that many microstructural properties show universal features independent of the underlying symmetries.
Numerical Computation of Stress Induced Microstructure

Zhiping Li

DOI: https://doi.org/10.1360/04za0015

2004-01-01

Science in China Series A Mathematics

Abstract:The mesh transformation method is applied on a two-dimensional elastic crystal model to study the formation of laminated microstructure in austenite-martensite phase transition when certain external loads are applied. Numerical experiments show that simple laminated microstructures with various volume fractions and twin width can be obtained by varying the loads. Numerical experiments also show that second order laminated microstructure with branched needle-like laminates can also be obtained by certain loads.
Angle-adjustable Density Field Formulation for the Modeling of Crystalline Microstructure

Zi-Le Wang,Zhirong Liu,Zhi-Feng Huang

DOI: https://doi.org/10.1103/physrevb.97.180102

2018-01-01

Abstract:A continuum density field formulation with particle-scale resolution is constructed to simultaneously incorporate the orientation dependence of interparticle interactions and the rotational invariance of the system, a fundamental but challenging issue in modeling the structure and dynamics of a broad range of material systems across variable scales. This generalized phase field crystal-type approach is based upon the complete expansion of particle direct correlation functions and the concept of isotropic tensors. Through applications to the modeling of various two- and three-dimensional crystalline structures, our study demonstrates the capability of bond-angle control in this continuum field theory and its effects on the emergence of ordered phases, and provides a systematic way of performing tunable angle analyses for crystalline micro structures.
NUMERICAL METHOD FOR ANALYZING INTERACTION AND COALESCENCE OF NUMEROUS MICROCRACKS

Xi-Qiao Feng,Lin Ma,Shou-Wen Yu

2005-01-01

Abstract:In this paper, a numerical method is presented for calculating the effective elastic moduli and the tensile strength as well as for simulating the failure process of brittle materials associated with microcracking damage. By introducing two criteria for microcrack growth and coalescence in terms of Griffith's energy release rate, the above numerical method is used here to simulate the coalescence process of microcracks that results in a fatal crack and the final rupture of a specimen.
Numerical Simulation Of Coalescence Of Numerous Microcracks

Xq Feng,L Ma

2004-01-01

Abstract:Many phenomena of deformation and failure of brittle or quasi-brittle solids are closely related to interaction and propagation of stochastically distributed microcracks. In this paper, a numerical method is presented for calculating the effective elastic moduli and the tensile strength and for simulating the failure process of brittle specimens associated with microcracking damage. By introducing two criteria for microcrack growth and coalescence in terms of Griffith's energy release rate, the above numerical method is used here to simulate the coalescence process of microcracks that results in a fatal crack and the final rupture of a specimen.
A Regularized Mesh Transformation Method for the Computation of Crystalline Microstructures.

ZP Li

DOI: https://doi.org/10.1016/j.mcm.2004.08.006

2005-01-01

Mathematical and Computer Modelling

Abstract:Since the finite-element approximations of microstructures are strongly mesh dependent, the use of the mesh transformation method based on the energy minimizing principle is considered a natural approach in the finite-element computation of microstructures. However, without a control on the mesh quality, the mesh can become increasingly irregular in the process of energy minimization and thus jeopardize the convergence of the algorithm. In this paper, a mesh quality control term based on the mesh regularity is introduced to regularize the mesh transformation procedure. The existence and convergence of the regularized mesh transformation method are proved. Numerical experiments show that the method does help to produce much better numerical results in the computation of microstructures.
Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

Qingyan Xu,Bin Li,Ying Liu,Baicheng Liu

DOI: https://doi.org/10.1504/IJMPT.2008.019771

2008-01-01

Abstract:A modified cellular automaton method was presented to simulate the evolution of dendrite microstructure accounting for the heterogeneous nucleation, the preferential growth orientation, the solute redistribution both in liquid and solid, the interface curvature and the growth anisotropy during solidification. The effect of the constitutional undercooling and curvature undercooling was incorporated based on the solid/liquid interface equilibrium. The finite difference method coupled with CA model was used to calculate the temperature and solute fields. The free growth of equiaxed grain and competitive growth of columnar grain in the directional solidification was predicted. The effect of the bubble on the dendrite growth and the solute distribution was investigated. The simulated results were compared with those obtained experimentally.
Numerical analysis of interaction and coalescence of numerous microcracks

Lin Ma,Xuyue Wang,Xi-Qiao Feng,Shou-Wen Yu

DOI: https://doi.org/10.1016/j.engfracmech.2004.08.009

IF: 5.4

2005-01-01

Engineering Fracture Mechanics

Abstract:The deformation and failure behaviors of brittle or quasi-brittle solids are closely related to interaction and propagation of stochastically distributed microcracks. The influence of microcrack interaction and evolution on the mechanical properties of materials presents a problem of considerable interest, which has been extensively argued but has not been resolved as yet. In the present paper, a novel numerical method is used to calculate the effective elastic moduli and the tensile strength, and to simulate the failure process of brittle specimens containing numerous microcracks. The influences of some crack distribution parameters reflecting the non-uniform spatial concentration, size and orientation distributions are examined. The effective elastic moduli and the tensile strength of brittle materials exhibit different dependences on microcrack interaction. For example, two microcrack distributions that lead to the identical effective elastic moduli may cause a pronounced difference in the tensile strengths and failure behaviors of materials. By introducing two criteria for microcrack growth and coalescence in terms of Griffith’s energy release rate, the above numerical method is extended to simulate the coalescence process of microcracks that results in a fatal crack and the final rupture of a specimen.
Numerical simulation technology based on crystal plasticity theory

LIU Hai-jun,FANG Gang,ZENG Pan

DOI: https://doi.org/10.3969/j.issn.1007-2012.2006.02.001

2006-01-01

Abstract:Crystallographic texture developed during the finite plastic deformation of polycrystalline aggregate has significant influence on its mechanical and physical properties as it causes plastic anisotropy. During the last two decades, many scientists of mechanics and materials endeavor to effectively predict the plastic behavior of polycrystalline materials using the crystal plasticity theory. The fundamentals and recent advances of the crystal plasticity theory are summarized in this paper, including the constitutive model for single crystals, averaging schemes between the polycrystal and the single grains within the aggregate, the numerical implementation of the constitutive models and also some predictions on the future development of the crystal plasticity theory.
Numerical Analysis And Computation Of A Multi-Order Laminated Microstructure

Zhiping Li

DOI: https://doi.org/10.1016/j.apm.2007.10.019

IF: 5.336

2009-01-01

Applied Mathematical Modelling

Abstract:The mesh transformation method is applied in a finite element approximation to a multi-well problem. It is proved that, compared with standard finite element methods, significantly higher convergence rate for the finite element approximations of multi-level microstructures can be obtained by combining the mesh transformation method with the periodic relaxation technique. Numerical examples are given to show the method can be efficiently implemented in computing multi-level microstructures. (C) 2007 Elsevier Inc. All rights reserved.
Numerical Simulation of Size Effects of Microcracked Elastic Solids

X. Q. FENG

DOI: https://doi.org/10.1007/978-1-4020-4946-0_4

2006-01-01

Abstract:A numerical scheme of micromechanics is presented by combining the effective stress field concept for estimating effective elastic moduli and Kachanov's method for calculating strong interaction of microcracks. Some applications of this method are illustrated, including: (1) calculation of the effective elastic moduli of microcracked solids, (2) determination of the strengths of brittle specimens under uniaxial tension or bending, and (3) simulation of the failure process associated with interaction and propagation of distributed microcracks. The size effects of these mechanical properties induced by stochastic microcrack distributions are examined.
NUMERICAL SIMULATION ON LCE CRYSTAL FORMULATION IN CELLULAR LEVEL BASED ON PHASE FIELD THEORY

Li Fang-fang,Liu Jing,Yue Kai

DOI: https://doi.org/10.3969/j.issn.1000-3258.2008.02.018

2008-01-01

Abstract:The micro-scale freezing damage mechanism is a key factor for cryosurgery and cryopreservation of biological material. Focusing on the microscale freezing problem, a phase-field model was employed to numerically simulate the formulation of the ice crystal. The basic approach to establish the important parameters was illustrated. Finally, both process and characteristics of the two-dimensional ice crystal growth under isotropical conditions were calculated.
Numerical modeling of faceted crystal growth using a lattice Boltzmann-phase field model with a new interfacial energy function

Bo Geng,Shilin Mao,Wei Chen,Dongke Sun

DOI: https://doi.org/10.1016/j.commatsci.2023.112273

IF: 3.572

2023-06-04

Computational Materials Science

Abstract:A lattice Boltzmann-phase field model is proposed to study faceted crystal growth in a supersaturated solution, taking into account a new anisotropic interfacial energy function to reproduce the facet characteristics. In this model, a flow field solver and a concentration field solver are coupled with the phase field equation to study faceted crystal growth with fluid convection and solute transfer. Qualitative and quantitative comparisons are carried out with the experimental observation and theoretical analysis of snowflakes to demonstrate the validity and accuracy of the present numerical method. Then crystallization of sodium chloride in a supersaturated solution is investigated in a 3D space at a constant temperature. The results show that the initial supersaturation, solute depletion rate, and solution flow can greatly change the faceted crystal growth by affecting solute transport and distribution. The mechanism of the formation of morphologies and interface velocity evolution is studied and concluded, which shows that the present model has instructional significance for studying and understanding the regulation mechanism of faceted crystal growth.

materials science, multidisciplinary
Numerical Simulation of Microstructure Evolution Based on A Modified Ca Method

Yu Jing,Xu Qingyan,Cu Kai,Liu Baicheng

DOI: https://doi.org/10.3321/j.issn:0412-1961.2007.07.012

IF: 1.797

2007-01-01

ACTA METALLURGICA SINICA

Abstract:Based on the basic transfer process, including heat transfer and solute transfer, and the physics of growth process of crystal grains, the mathematical models for the 3D simulation of microstructure and free dendritic growth of single phase alloy were developed and a new capturing rule was presented. Many factors such as constitutional undercooling, curvature undercooling and grain growth in random preferential growth directions, which had vital influences on the evolution of microstructure, were considered in the model. Simulated results showed that the grain growth in random preferential growth directions can be described by the model reasonably, and the simulated results were coincident with actual phenomena. The simulation results of directional growth of multiple nuclei indicated that the primary dendrite space was independent of initial nuclei number when the growth reached a stable state. The model and the capturing rule are suitable to further research of microstructure evolution of directional solidification.
A versatile numerical approach for calculating the fracture toughness and R-curves of cellular materials

Meng-Ting Hsieh,Vikram S. Deshpande,Lorenzo Valdevit

DOI: https://doi.org/10.1016/j.jmps.2020.103925

IF: 5.582

2020-05-01

Journal of the Mechanics and Physics of Solids

Abstract:<p>We develop a numerical methodology for the calculation of mode-I R-curves of brittle and elastoplastic lattice materials, and unveil the impact of lattice topology, relative density and constituent material behavior on the toughening response of 2D isotropic lattices. The approach is based on finite element calculations of the J-integral on a single-edge-notch-bend (SENB) specimen, with individual bars modeled as beams having a linear elastic or a power-law elasto-plastic constitutive behavior and a maximum strain-based damage model. Results for three 2D isotropic lattice topologies (triangular, hexagonal and kagome) and two constituent materials (representative of a brittle ceramic (silicon carbide) and a strain hardening elasto-plastic metal (titanium alloy)) are presented. We extract initial fracture toughness and R-curves for all lattices and show that (i) elastic brittle triangular lattices exhibit toughening (rising R-curve), and (ii) elasto-plastic triangular lattices display significant toughening, while elasto-plastic hexagonal lattices fail in a brittle manner. We show that the difference in such failure behavior can be explained by the size of the plastic zone that grows upon crack propagation, and conclude that the nature of crack propagation in lattices (brittle vs ductile) depends both on the constituent material and the lattice architecture. While results are presented for 2D truss-lattices, the proposed approach can be easily applied to 3D truss and shell-lattices, as long as the crack tip lies within the empty space of a unit cell.</p>

mechanics,materials science, multidisciplinary,physics, condensed matter
Numerical Simulation and Experimental Verification of Microstructure Evolution in A 3-Dimensional Hot-Upsetting Process

LS Wang,QX Cao,Z Liu

DOI: https://doi.org/10.1016/0924-0136(95)02147-7

IF: 6.3

1996-01-01

Journal of Materials Processing Technology

Abstract:A coupled thermoviscoplastic finite-element software has been developed for modeling metal flow in hot metal-forming processes, especially for predicting the microstructural changes and mechanical properties of the products. Using this code, the dynamic recrystallization kinetics and recrystallized grain-size distributions during hot metal-forming processes can be simulated. In order to confirm the validity of the code developed, the results of an experiment into 3-dimensional hot upsetting (45 steel) are reported in the present paper, the recrystallized grain sizes being found to be in good agreement with the simulated results.
Two-dimensional Numerical Simulation of Crack Propagation

LIU Qiang,HUANG Zhongyi

DOI: https://doi.org/10.3321/j.issn:1000-0054.2006.09.028

2006-01-01

Abstract:This paper studies two-dimentinal crack propagation. Continuum models become inaccurate when describing micro scale crack propagation. Atomistic models, which are more accurate near the crack tip, were combined with a continuum model far from the tip to reduce the computations. A matching condition (such that the high-frequency waves are absorbed) was used at the interface to get an approximate solution. The method reduces the computational complexity from O(N~2) to O(N). The numerical results agree very well with results from the full atomistic model.
Numerical solution to phase-field model of solidification: A review

Ang Zhang,Zhipeng Guo,Bin Jiang,Shoumei Xiong,Fusheng Pan

DOI: https://doi.org/10.1016/j.commatsci.2023.112366

IF: 3.572

2023-07-10

Computational Materials Science

Abstract:Recent advances in improving the computational efficiency of the phase-field simulations of solidification microstructures are reviewed. The parallel progress of four typical approaches, namely, multigrid, adaptive mesh refinement method, semi-implicit Fourier spectral method, and graphical processing units (GPUs) architecture, is highlighted. Large-scale spatiotemporal simulations are successfully performed to cover essential aspects of multiphysics with the capability of these algorithms. Focus is put on the principles, applications, and comparison of the four algorithms, while solidification theories and discretization methods are outlined.

materials science, multidisciplinary

Numerical Computation of Crystalline Microstructure

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Rotational Transformation Method and Some Numerical Techniques for Computing Microstructures

Grain Extraction and Microstructural Analysis Method for Two-Dimensional Poly and Quasicrystalline Solids

Numerical Computation of Stress Induced Microstructure

Angle-adjustable Density Field Formulation for the Modeling of Crystalline Microstructure

NUMERICAL METHOD FOR ANALYZING INTERACTION AND COALESCENCE OF NUMEROUS MICROCRACKS

Numerical Simulation Of Coalescence Of Numerous Microcracks

A Regularized Mesh Transformation Method for the Computation of Crystalline Microstructures.

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

Numerical analysis of interaction and coalescence of numerous microcracks

Numerical simulation technology based on crystal plasticity theory

Numerical Analysis And Computation Of A Multi-Order Laminated Microstructure

Numerical Simulation of Size Effects of Microcracked Elastic Solids

NUMERICAL SIMULATION ON LCE CRYSTAL FORMULATION IN CELLULAR LEVEL BASED ON PHASE FIELD THEORY

Numerical modeling of faceted crystal growth using a lattice Boltzmann-phase field model with a new interfacial energy function

Numerical Simulation of Microstructure Evolution Based on A Modified Ca Method

A versatile numerical approach for calculating the fracture toughness and R-curves of cellular materials

Numerical Simulation and Experimental Verification of Microstructure Evolution in A 3-Dimensional Hot-Upsetting Process

Two-dimensional Numerical Simulation of Crack Propagation

Numerical solution to phase-field model of solidification: A review