Abstract:Frame anchor supporting structure is widely accepted in the loess area, especially in the multistage slopes along the road. However, the development between theory and practice is not synchronous, and there exist experience and uncertainty in the design process to a great extent. In response to this problem, the multistage loess slope supported by frame structure with anchors is taken as the research object, and the model test is carried out with the help of the large-scale geotechnical centrifuge under the condition of using prototype materials as much as possible. Then, according to the test data and phenomena, the structural stress and slope deformation concerned in the project are analyzed. The main differences in stress and deformation between the multistage loess slope supported by frame structure with anchors and other types of slopes are pointed out, and some targeted suggestions are given. The research results show that the frame anchor supporting structure and soil can always maintain coordinated deformation during centrifugal loading, and the failure process has certain toughness characteristics. The stress characteristics of the anchor rod and the sliding deformation range of the slope in the multistage loess slope supported by frame structure with anchors are different from the slope with structural surface and single-stage slope. The length of the anchoring section cannot be completely determined based on the potential sliding surface in the design. It is reasonable to strictly control the end position of the anchoring section from the perspective of changing the position of the potential sliding surface. The results obtained can enrich and improve the stability theory of multistage loess slope and provide guidance for engineering practice.

Analysis of Bearing System of Frame Beams with Anchor Pier in Slope Engineering

DISCUSSION ON SOME PROBLEMS OF BEAM-STRING STRUCTURES

Internal Force Calculation and Stability Analysis of the Slope Reinforced by Pre-Stressed Anchor Cables and Frame Beams

Analysis and prediction of anchored caisson foundation displacement based on monitoring data

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Comparative Study Of Anchor Double-Row Piles And Frame Double-Row Piles

Study on the Interval of Pre-Stressed Anchor Cables and Cantilever Length of Frame Beams in Reinforcing Slopes

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Three-dimensional stability of a fill slope reinforced by a frame beam anchor plate

Internal Force and Deformation Analysis of Pile-Brace Support Structure of Foundation Pit Considering Deformation Compatibility

Reliability analysis of slope reinforced by frame anchors considering multi-anchor failure

Analysis on Deformation Failure and Structural Mechanical Characteristics of Multistage Loess Slope Supported by Frame Structure with Anchors

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Seismic Stability Limit Analysis of Unsaturated Soil Slopes Reinforced by Frame Beam Anchor Plates

Reinforcement mechanism analysis of lattice beam and prestressed anchor rod system for loess slope

New Interaction Model for the Annular Zone of Stepped Piles with Respect to Their Vertical Dynamic Characteristics

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

RESEARCH ON COORDINATION MECHANISM OF SLOPE ANCHORING AND REINFORCEMENT

Seismic Stability Analysis of Slope Reinforced by Frame Anchors Considering Prestress