Abstract:In order to deeply study the mechanism of prestressed anchor anti-slide pile, an indoor model experimental device was developed, and a finite difference and particle flow numerical analysis model of slope anchor cable anti-slide pile was established based on the reinforcement project of prestressed anchor cable anti-slide pile in a mountain road slope. Based on the analysis of the force and displacement characteristics of the anti-slide pile, the influence of the prestress of the anchor cable, the inclination angle of the anchor cable, the width and column spacing of the anti-slide pile and the inclination angle of the landslide, the height and nature of the filling soil on the force and deformation characteristics of the pile are discussed, and some design parameters are optimized. Results show that the larger the prestress of the anchor cable, the smaller the displacement of the pile body, but the excessive stress is not conducive to the safety of the pile body. The optimal tension should be 50–70% of the designed tension of the anchor cable. With the increase in the inclination angle of the anchor cable, the displacement of the pile decreases first and then increases, and there is an optimal inclination angle of the anchor cable. In the double row piles, with the increase in pile spacing, the front row piles gradually change from supporting the soil between the double row piles to supporting the sliding body with the back row piles, and the double row piles are plum-shaped. When the pile spacing is 2.5 times the pile diameter, the force of the front and rear piles is the most reasonable. In the process of soil arching evolution, the influence of cohesion on the soil arching effect is greater than that of the internal friction angle.

Comparative Study Of Anchor Double-Row Piles And Frame Double-Row Piles

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

OPTIMIZATION DESIGN OF CONNECTION METHODS OF DOUBLE-ROW ANTI-SLIDE PILES TIP

DISTRIBUTION OF LANDSLIDE THRUST ON CANTILEVER DOUBLE-ROW ANTI-SLIDING PILES

Case study of double-row-pile wall

Assessment of Cohesive Soil Landslide Driving Forces Exerted on Piles Considering Soil Arching Effects

Nonlinear Analysis of Combined Actions of Anchor Rod and Earth-Retaining Pile Wall and Its Optimum Design

STUDY ON THE BEHAVIOR OF CANTILEVER DOUBLE-ROW PILES SUPPORTING DEEP EXCAVATION

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Analysis method for pile groups subjected to lateral and torsional loads

Analysis Of Deformation And Internal Force For Single Pile Under Combined Vertical And Lateral Loads Considering Yielding Of Soil

Analysis of Influence Factors of Anti-Slide Pile with Prestressed Anchor Cable Based on Bearing and Deformation Characteristics of Pile Body

Application Study of Long-Short-Piled Raft Foundation

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

FEM Analysis and Design of Long Short Pile Composite Foundation

CALCULATION MODEL OF DOUBLE-ROW STABILIZING PILES BASED ON DISPLACEMENT OF SOIL AROUND PILES

Model Test And Numerical Analysis Of Geogrid-Reinforced Pile-Supported Foundation