Abstract:Currently eutrophication has become a hot issue all over the world.The removal of phosphorus from wastewaters is regarded as an important approach to fight eutrophication since phosphorus is one of the main factors causing eutrophication.The chemical phosphorus removal technology with ferric salt as a precipitant is in widespread use to meet the wastewater discharge standard.The optimization of phosphorus removal technology helps to cut down the cost of wastewater treatment.Herein the response surface methodology(RSM)is introduced to investigate the individual and combined effects of operation parameters.The performance of chemical phosphorus removal technology with ferric salt as a precipitant is dependant on a series of factors.Fe/P ratio,pH and flash mixing speed(FMS)were chosen as objects of study,and single-factor experiment and multiple-factor experiment were carried out to optimize the phosphorus removal efficiency.The results of single-factor experiment showed that both Fe/P ratio and pH had significant effects on phosphorus removal,but FMS did not.When the phosphorus concentration was 100mg/L,the optimal operation parameters were Fe/P ratio 3.0,pH 8.0,FMS 175-225r/min.The results of multiple-factor experiment showed that the individual effects of operation parameters on phosphorus removal were in order as Fe/PpH FMS.The combined effects of operation parameters were in order as Fe/P-FMS pH-FMS Fe/P-pH,among which the effects of Fe/P-FMS and Fe/P-pH were positive and the effect of pH-FMS was negative.Based on the experiment,priority/combinationmodel was proposed to enhance the phosphorus removal with ferric salt as a precipitant.The optimal operation parameters were as follows:Fe/P=2.57,pH=6.31and FMS=136r/min,when the phosphorus concentration was 100mg/L.Both synthetic and real wastewaters were used to verify the feasibility ofpriority/combinationmodel.Operated according to the model,the phosphorus removal was larger than 97%and the fractional error was less than 3%.It can be concluded that the response surface methodology is feasible for the optimization of operation parameters in wastewater treatment processes.Thepriority/combinationmodel is effective for the improvement of phosphorus removal from wastewaters with ferric salt as a precipitant.During the wastewater treatment,the synergic action of operation parameters should be fully used,while the antagonistic action of operation parameters should be carefully avoided.

Studies on the removal of phosphorus in drinking water purification technology

Biological Phosphorus Removal Performance and Relevant Microorganism Characteristics of Activated Sludge in Municipal Wastewater Treatment Plants, China

Study on total phosphorus as controlling parameter of drinking water biological stability

Effect of Advanced Drinking-Water Treatment Techniques on Removal of Organic Pollutants

Process Optimization for Phosphorus Removal with Ferric Salt by Response Surface Methodology

Improvement of organics removal by bio-ceramic filtration of raw water with addition of phosphorus.

Improving Removal Efficiency of Organic Matters by Adding Phosphorus in Drinking Water Biofiltration Treatment

Microbiology and New Technology of Biological Phosphorous Removal

Enhancing the removal efficiency of microplastics in drinking water treatment

Destruction of microbial stability in drinking water distribution systems by trace phosphorus polluted water source

Removing bacteria contaminants from raw surface water using multiple barriers pilot-scale reactor: sand filtration, activated carbon, and advanced oxidation processes

Field experiment on treatment of soure water supply by biological contact oxidation process

Advances in the treatment of phosphorus-containing wastewater

Study on the Biological Treatment for Polluted Raw Water

STUDY OF TREATMENT OF MICRO-POLLUTED RAW WATER BY PAC-MBR PROCESS

A Study on the Removal of Mutagens from Water by Various United Water Purification Processes

A review of micro-organic-pollutants removal from the reclaimed water by artificial composite soil treatment system

Performance of public drinking water purifiers in control of trihalomethanes, antibiotics and antibiotic resistance genes

Optimization of Coagulation and Ozonation Processes for Disinfection by–Products Formation Potential Reduction

Fate of Naturally Dissolved Organic Matter and Synthetic Organic Compounds Subjected to Drinking Water Treatment Using Membrane, Activated Carbon, and UV/H2O2 Technologies

Research Progress on Pretreatment Technology for Drinking Water Disinfection