Photocatalytic Ozonation of Catechol by Titania Thin Film

LS Li,WP Zhu,PY Zhang,ZY Chen,L Chen
DOI: https://doi.org/10.3321/j.issn:0253-9837.2003.03.003
2003-01-01
Abstract:The combination of a nano-TiO2 thin film modified by carbon black and photocatalytic ozonation has been investigated for the degradation of catechol. The results show that the ozone concentration has an significant effect on total organic carbon (TOC) removal of catechol. The combined photocatalysis of UV irradiation and ozonation (TiO2/UV/O-3) considerably increases TOC removal compared with the combined photocatalysis of UV irradiation and oxygen oxidation (TiO2/UV/O-2), ozonation alone (O-3), and the combined process of UV irradiation and ozonation (UV/O-3). For example, the TOC removal rate after 30 min of reaction in the TiO2/UV/O-3 process with the same ozone concentration is 55.2% similar to 62.6% higher than that in the O-3 process and 18.0% similar to 34.6% higher than that in the UV/O-3 process when the ozone flow rate is over 25.0 mg/h. The removal rate is 58.8% similar to 68.8% higher than that in the TiO2/UV/O-2 process. The kinetic study shows that the complete mineralization of catechol follows pseudo-zero-order kinetics in which the TOC removal depents on ozone (oxygen) concentration and the catechol concentration does not affect the kinetics in the UV/O-3(O-2) and TiO2/UV/O-3 (O-2) processes. These results also indicate that the indirect reaction of ozone may play a dominant role for the complete mineralization of catechol. The rate constants in the complete mineralization of catechol in the TiO2/UV/O-3 process are 1.32 similar to 1.80 times higher than that in the UV/O-3 process with the same concentration of ozone, 2.56 similar to 5.36 times higher than the maximum rate constants in the TiO2/UV/O-2 process and 5.47 similar to 11.4 times higher than the maximum rate constants in the UV/O-2 process.
What problem does this paper attempt to address?