Abstract:In many circumstances, the conventional ultrasonic liquid-level detection presents the unreliable estimations due to the dynamically changed liquid level. In addition, there are circumstances where the level change involves not only the fluctuation but also the rise or fall of liquid level. To improve the measuring accuracy of liquid level using the ultrasonic method in dynamically changed level case, an attractive ultrasonic method, named the liquid-level detection based on the multiple-input multiple-output ultrasonic transducer array, is proposed in this paper. This method is different from the early ultrasonic liquid-level detections, including those that utilize transducer array. Based on the virtual element technology, the method employs the multitransducer array to achieve the reduction of system complexity and cost, and then applies the synthetic aperture technology to realize rapid samples of liquid level. Besides, one adaptive searching scheme of focused position in beamforming of synthetic aperture in each scanning direction is optimized to get the high precise samples of liquid level. The proposed method is verified by simulation and a real system, and compared with the conventional single-channel approach. We still proposed a simulation method of ultrasonic echo signal from liquid level based on the boundary-layer theory and the ultrasonic scattering theory. The simulated and actual measurement results demonstrate that the proposed method is obviously superior to the conventional approach. Meanwhile, the factors influencing on the proposed method are investigated by simulation also. The investigations reveal that the focus position in beamforming, the SNR of echo signal, and the wave size of liquid level have impact on the suggested method. However, it is indicated that the good performance of the proposed method remains, provided that the focus in beamforming is properly set in every scanning direction and the noise of echo signal is effectively controlled.

Development of Kind of Foam Level Detecting Sensor

Study of Unique Foam Detecting Sensor

The Development of a Highly Sensitive, Broad-Range Hierarchically Structured Reduced Graphene Oxide/PolyHIPE Foam for Pressure Sensing.

Development of a Gas Flow Sensor Based on FS5 Hot-Film Probe

Measurement of Particle Materials and Liquid Level

A brief history of the physics of foams

Development of Eco-Friendly and High-Strength Foam Sensors Based on Segregated Elastomer Composites with a Large Work Range and High Sensitivity

Design of Thermal Liquid Flow Microsensor

A Study on the Oil-Bearing Stability of Salt-Resistant Foam and an Explanation of the Viscoelastic Phenomenon

Development of a water level sensor using magnetostrictive materials

How to use stimuli-responsive soft materials for detection?

Experimental Study and Analysis of Energy Evolution of Liquid Foam Drainage in One Dimension

Room temperature triethylamine gas sensor with excellent performances based on novel porous CuO foam via a simple and facile route

Dual-Sensing Piezoresponsive Foam for Dynamic and Static Loading

Discrete Modelling of Two-Dimensional Liquid Foams

Multifunctional polyether block amides/carbon nanostructures piezoresistive foams with largely linear range, enhanced and humidity-regulated microwave shielding

A Liquid Level Positioning System For Non-Metal Containers Based on Localized Spoof Surface Plasmon

Recent developments on epoxy-based syntactic foams for deep sea exploration

A Flexible, Highly Sensitive Porous PDMS Tactile Sensor Based on the Physical Foaming Method

An Accurate Detection for Dynamic Liquid Level Based on MIMO Ultrasonic Transducer Array.

Piezoresistive foam sensor arrays for marine applications