Abstract:Poly(3-hydroxybutyrate) is one of the most applicative biodegradable polymers. However, its industrial application remains limited, owing to several inherent deficiencies including poor mechanical properties such as brittleness due to its high crystallinity and narrow thermal processing range. To overcome these drawbacks, a number of copolymers with other similar hydroxyalkanoate monomer units have been developed such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate), [P(HB-HV)]. Compared with PHB, these copolymers exhibit outstanding improvement of physical/mechanism properties such as reduced brittleness and enhanced flexibility. Although the preparation and its physical/mechanism properties had been investigated extensively, less work has been done for answering the questions about the molecular basis of them and the relationship between the micaostructural and dynamic properties and their macroscopic properties. Nafion is one of the most promising proton-exchange membranes used in direct methanol fuel cell (DMFC). In practice, normal Nafion materials are not applicable for DMFC due to poor mechanical stability at temperature above 100 ℃. In order to develop the higher temperature electrolyte materials, many attempts have, so far, been made by modifying the Nafion membrane with various nonconductive inorganic materials. However, little information is available on the molecular basis of such thermal stability improvement. In addition, there are few reports dealing with the molecular structure of these composite materials, the interactions between the inorganic and organic species at the molecular level and structure-property relationships which will undoubtedly be useful for future development of materials. In this dissertation, combined with XRD various solid state NMR techniques including 13C CP MAS、 13C SPE MAS NMR, proton relaxation induced spectra editing, 1H spin-diffusion have been employed to investigate the crystallnility and domain structural character. The experimental results show that with the content of HV increasing their crystallinity decrease, domain size of amorphous region increase and domain size of rigid region decrease, which can be seen at the molecular lever that introduction of HV results in the macroscopic properties improvement of PHB. Furthermore, 1H variable temperature relaxation time (T1, T1ρ and T2) measurements have been employed to investigate the molecular motional parameters such as molecular rotational correlation time (τ0) and active energy (Ea) in the PHB and its copolymers PHBV. The results imply that the higher the content of HV, the faster the molecular motion, the lower the molecular active energy, which can be correlated to their structural and molecular dynamic properties at the molecular lever. A series of nanocomposites have been prepared from perfluorosulfonylfluoride copolymer resin (Nafion) and layered montmorillonite (MMT) modified with protonated dodecylamine by conventional sol-gel intercalation. FT-IR and 29Si MAS NMR results showed no significant alteration to the lattice structure of m-MMT and addition of the organically modified MMT led to moderate improvement of the thermal stability of Nafion resin though the resin was not intercalated into the m-MMT. 19F MAS, 1H-13C CP MAS and HETCOR 2D NMR experimental results, combined with XRD and element analysis, indicated strong interactions between NH+3 group of surface absorption of dodecylamine and the SO-3 group of the resin side chain. It is concluded that interactions between the resin and the surface absorbed organic modifier probably have some contributions to the resin thermal stability enhancement resulting from addition of m-MMT.

Study on the Crystallinity, Thermal Stability and Transportation of Polyschiff's Base Containing Triarylated Amine Cavity Transporting Materials

The Study on the Electrolyte Behavior of Aromatic Polyesters from Diphenolic Acid and Isophthaloyl Chloride

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Temperature-dependent Crystalline Structure and Phase Transition of Poly(butylene Adipate) End-Functionalized by Multiple Hydrogen-Bonding Groups

Synthesis and Properties of Poly-Schiff Base Containing Bisthiazole Rings

Synthesis and Characterization of New Aramids Based on O-(M-triphenyl)-terephthaloyl Chloride and M-(M-triphenyl)-isophthaloyl Chloride

Synthesis and electronic properties of comb-like polyamides bearing different contents of tetraaniline pendant groups

Synthesis and Characterization of A Series of Novel Schiff Base Liquid Crystalline Polymer Crown Ethers

SYNTHESIS AND CHARACTERIZATION OF SOME THERMOTROPIC LIQUID CRYSTALLINE POLYAMIDES

Studies on the Structure and Properties of Thermotropic Liquid Crystalline Poly(aryl Ether Ketone)s

EFFECT OF SEQUENCE STRUCTURE ON THE THERMOTROPIC LIQUID CRYSTALLINE PROPERTIES OF POLYESTERAMIDES BASED ON DIMETHYLBENZIDINE, BISPHENOL-A AND P-TEREPH THALYL CHLORIDE

Syntheses, Crystal Structures, And Gas Storage Studies In New Three-Dimensional 5-Aminoisophthalate Praseodymium Polymeric Complexes

Synthesis, structure-property relationships of polyphosphoramides with high char residues

Synthesis And Thermotropic Liquid-Crystalline Behavior Of Novel Main-Chain Poly(Aryl Ether Ketones)

Synthesis of Novel Liquid Crystalline Poly(Meth)Acrylates Containing Siloxane Spacer and Terphenylene Mesogenic Unit

Synthesis and Phase Transition Behaviors of Thermotropic Liquid Crystalline Polypeptides with Different Side Chains

SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC POLYAMIDE LIQUID CRYSTALLINE BLOCK COPOLYMERS

Synthesis and Properties of Poly(p-Phenylene Terephthalamide) Bearing Both Polar and Unsaturated Substituents Introduced Via Claisen Rearrangement Reaction

Synthesis and Characerization of A Series of Mesogen-Jacketed Liquid Cryatalline Polymers with Long Mesogenic Side Chains

The Domain Structure, Molecular Dynamics and Interaction of Several Polymers Studied by Solid State NMR

Synthesis and Characterization of Liquid Crystalline Copolyesters Containing Horizontal and Lateral Rods in Main Chain