Experiment and numerical simulation of temperature field during electron beam welding of M42/X32

ZHAO Lian-feng,YI Dan-qing,LIU Huan,WANG Qi,WANG Bin

DOI: https://doi.org/10.3969/j.issn.1673-0224.2015.04.004

2015-01-01

Abstract:Finite element numerical model was established using FEA software-ansys to research the temperature field of M42/X32 bimetal blade saw. The best process that welding voltage should be 140 k V, welding current should be 20 m A and welding speed should be 2 m?min-1 can be concluded. Under such process, the calculation accuracy of the weld width between experimental results and simulations ranges from-3% to 1.5%. The simulations agree well with experimental results, which proves the validity and applicability of double ellipsoid heat source model on the temperature field of electron beam welding. A typical as-cast structure in weld seam can be obtained. Fusion zone of M42 consists of martensite and M2 C zone and the microstructure of heat affected zone obtains martensite, retained austenite and carbonizations. While the fusion zone of X32 can be subdivided into martensite and martensite-like zone, and heat affected zone of X32 is made up of martensite, ferrite and M23C6 zone.