Research on the NC Program for Mass Customization

李梦群,刘春美,孙厚芳

DOI: https://doi.org/10.3969/j.issn.1002-2333.2003.03.004

2003-01-01

Abstract:This paper analyzes the characteristic of design for Mass customization,points out the characteristic of NC program for Mass Customization,proposes the construction,the executing mechanism and the developing method of the NC program system for Mass Customization.

What problem does this paper attempt to address?

Research on NC Program Desidn for Mass Customization

Cui, Jian,Qi, Guoning

DOI: https://doi.org/10.1049/cp:20060756

2006-01-01

Abstract:To meet the NC program design of mechanical parts for Mass Customization, this paper puts forward the systematic structure and information model of NC program design. On the basis of the NC program intelligent design system, Product Data Management (PDM) and CAD are integrated as the platform, then, the main NC program of part is obtained through putting the parameter document into the NC program intelligent design system from SML (Tabular Layouts of Article Characteristics). NC Meta-model program stock is founded by adopting the Meta-model idea, which is seen as the resource-stock for NC design. According to the customization need, the parameters are changed in SML, then, the Meta-model program stock is searched, the configuration and variant design are realized through distilling, increasing, deleting and modifying the sub-program. Finally, the customized NC code is obtained. The T6436 rotor-circulating part is applied to validate the theory in the paper. Results show the NC program design for Mass Customization improves the design efficiency and meets product customization.
Nc Programming System For Mass Customization

Xs Xu,Sl Fang,Sy Wu,Xj Gu

2005-01-01

Abstract:In the new and emerging mass customization (MC) strategy, companies provide customized products or services on the basis of flexible manufacturing and modem information technology (IT). This paper focuses on the rapid design and automatization issue of NC machining program. A NC programming system for mass customization was investigated and employed to construct master NC program of part family and generate NC machining program of variant part rapidly. The purpose is to increase the development efficiency of NC machining program in mass customization company and make the NC machining program meet the variant design of part. In order to expedite the implementation of such a system,the NC programming principle for mass customization was researched. The model of master NC program was presented based on the definition of machining feature and the design of NC subprogram base. In addition,the content and structure of master NC program were analyzed. Then a prototype system was designed and its function model was presented on the basis of CAD system and PDM system. Finally,a case study on bearing cover was carried out to verify the validity of this system.
Numerical Control Programming Oriented to Customized Product

XU Xin-sheng,FANG Shui-liang,GU Xin-jian

DOI: https://doi.org/10.3969/j.issn.1006-5911.2006.12.004

2006-01-01

Abstract:In order to generate the Numerical Control (NC) machining program of variant product rapidly, design principles of NC program for customized product was studied. The NC program design method of establishing master NC program based on product variant master model was proposed. In order to establish master NC program, the machining features of customized product were analyzed and defined, and NC subprogram base was designed. Furthermore, a prototype of master NC program was designed. The NC machining program of customized product could be obtained by analyzing, calculating and processing the data through a NC program generation process. In addition, combining tabular layouts of article characteristics with master NC program, the variant design of NC machining program could be achieved. Finally, an application example was given to verify the above-mentioned principles and methods. Results indicated that this method could realize the downstream variant response of customized product development process, and support mass customization production efficiently.
Study on Mass Customization Production and Its Application Method

李仁旺,祁国宁,顾新建,吴昭同

DOI: https://doi.org/10.3321/j.issn:1004-132X.2001.04.012

2001-01-01

Abstract:Now,mass customization（MC） has become one of the most important branch of advanced manufacturing technology. In this paper, a theoretical model about MC is established. Then, some original ideas about MC's definition, classification, philosophism are introduced with the conclusions, inspiration and enlightenment. Based on the analysis of MC's application ideology and method system, the authors elucidated the theoretical base of MC. Of course, especially importantissue is that the authors gave out some concrete examples about MC in this paper.
Study on Implementation Method of Mass Customization Based on its Extenics Model

Kun-chang CHEN,Zi-chen CHEN

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.06.017

2005-01-01

Abstract:Mass customization (MC) is an important production mode of manufacturing enterprise in the 21st century. Firstly, MC and its extenics model are elucidated. Secondly, application of extenics in the MC implementation is illustrated based on “serialization”, “vari-type structure design” and “vari-technologic design”. Summarily speaking, this paper provides new thoughts and tools for enterprise to find new, efficient implementation method of MC.
Master NC Program Design for Variant Parts

Xu Xinsheng,Fang Shuiliang,Wu Shengyong,Gu Xinjian

2006-01-01

Abstract:Aiming at the rapid design issues of NC machining program in the context of mass customization,a kind of master NC program model that fits to be used in part dimension variant design was presented after analyzing the variant design technologies and NC programming technologies. The content and structure of master NC program were analyzed in detail based on the definition and partition of machining feature as well as the design of NC subprogram base. Then the constructing process of master NC program was presented. At the same time, a design guide of master NC program was developed, so master NC program of customized part family can be constructed rapidly through the interaction of human and computer, and the NC machining program generation based on master NC program is realized. Therefore, the NC machining program of variant part can be generated rapidly, and the efficiency and automation level of NC programming are heightened. Finally, an application example was given to verify the feasibility of principles.
Study on System Optimization Method for the Actualization of Mass Customization

徐福缘,李敏,顾新建,王恒山

DOI: https://doi.org/10.3969/j.issn.1006-5911.2001.06.010

2001-01-01

Abstract:Mass customization is a kind of product mode which is to organically combine the customization product mode and mass product mode according to the individual customers(needs. The paper proposed a basic thought for the actualization of mass customization, and discussed the thought from the aspects of physical description and mathematical model separately. Therefore, the paper provided a new angle of view for the actualization of mass customization.
An Integrated Manufacturing System for Mass Customization

Xinsheng Xu,Shuiliang Fang,Xinjian Gu,Xiangbing Xu

DOI: https://doi.org/10.1109/wcica.2006.1714397

2006-01-01

Abstract:In order to increase productivity, integrated manufacturing as a kind of strategy has become more and more important. A conceptual model of integrated manufacturing was proposed. Focusing on the numerical control machining of customized product, the integrated manufacturing principle for mass customization was discussed and architecture model of an integrated manufacturing system was presented as well. Firstly, the master model and master NC (numerical control) program of customized product were built. Then these manufacturing resources were unified managed in the PDM (product data management) system. Based on these resources, variant design of customized product could be carried out, at the same time NC machining program of customized product could be generated rapidly. Secondly, NC machining program was input into the NC machining tool through a DNC (distributed numerical control) system, and then remote machining and control would be realized. By adopting this integrated manufacturing system, company can implement mass customization production effectively
Study on Mass Customization and Its Actualization

LI Min,XU Fuyuan,GU Xinjian

DOI: https://doi.org/10.3321/j.issn:1004-132x.2001.z1.026

2001-01-01

Abstract:Mass Customization is a new kind of product mode that satisfying individual customers' needs while keeping mass production efficiency, such as time to market, low cost and high quality. On the basis of the introduction of the product mode evolution, the paper presented that mass customization is the prevailing product mode of 21 century. And analyzed the connotation of mass customization from the point of target integrated optimization. Then studied on the philosophy of mass customization by dividing it into four levels. The paper discussed the actualization of mass customization on the aspects of advanced technology, advanced management and advanced staff in the end.
Quantitative Analysis Method of Mass Customization

顾新建,祁国宁,徐福缘,许晓兵

DOI: https://doi.org/10.3321/j.issn:1004-132x.2001.03.324

2001-01-01

Abstract:In the paper,a new quantitative analysis method has been putforward.This method can be used for the description,comparison and analysis for the mass production,customization production and mass customization production.Through a practical example,two basic methods of the mass customization,which are the back-moving of the customer order decoupling point and the modularization,are illustrated.At the end of the paper,an example from an actual system is given.All of these showed,the quantitative analysis method is valuable for the appraisement of mass customization.
Research and implementation of quality control oriented to mass customization

XU Jing,QI Guo-ning,YANG Qing-hai,GU Xin-jian,LIU Xi-ze

DOI: https://doi.org/10.3785/j.issn.1008-973X.2009.12.029

2009-01-01

Abstract:The architecture of quality control oriented to mass customization (MC) was proposed in order to meet the new requirements of MC.Focusing on quality characteristics,the transition between custom requirements and quality characteristics reflection on the demand of design and manufacturing was described in detail.The optimal quality characteristics were obtained according to evaluation indexes and evaluated whether the maximum customer satisfaction was achieved.The continuous quality improvement was conducted by using the statistical process adjustment (SPA) as the method of quality control oriented to MC.The quality control system was developed by Genexus,and the application of it indicates that the method can provide the personalized customization products and services with high quality,low cost and short due date,and meet the customer satisfaction to a greatest extent.
Study on the Product Design for Mass Customization

李敏,徐福缘,顾新建,杨志雄

DOI: https://doi.org/10.3321/j.issn:1004-132x.2002.10.012

2002-01-01

Abstract:The product design for mass customization is the key to successfully implement mass customization in enterprises. The paper introduced four kinds of product design methods for mass customization. Product collocation design is a method which is based on preexisting product configuration and modules. Product variation design is a method which is not only based on preexisting product configuration and modules but also on the diversification of the module size according to the different demands of customers. Product combination design chooses product configuration and modules according to the requirements of customers. And when there are great changes in customer demands, product innovation design is used. The features of the four design methods were compared in the end.
Research and development on collaborative product design tools for mass customization

ZX Yang,XJ Gu,YD Qian,W Sun,XB Liu

2003-01-01

Abstract:The realization of mass customization need synthetically apply modern design method, information technologies, management method and so on. In the paper, we introduce collaborative product design tools for mass customization. which help to implement MC. These tools include the investigation tool for customers' needs, the parts information coding and search tool, the product configuration design tool, the product variant design tool, the knowledge management tool, the standard parts management tool, the collaborative design process management tool, etc..At the same time, main characters of the tools are analyzed.
Reconfigurable Automation Manufacturing Equipment Facing Mass Customization

顾新建,孙静,丁勇,陈子辰,徐福缘

DOI: https://doi.org/10.3969/j.issn.1006-3269.2001.01.010

2001-01-01

Abstract:In the paper, Under the background of Mass Customiza tion being the mainstream production mode, the research status about the reconfigurable automation manufacturing equipment has been stud ied, the problem in the equipment manufacturing industry has been analyzed. The idea of developing the reconfigurable automation manufac turing equipment facing Mass Customization is put forward, which in cludes: the research of the developing strategy and design methodology for the reconfigurable automation manufacturing equipment facing Mass Customization,the research of opening numerical control, the research of the reconfigurable machine tool and recofigurable manufacturing sys tem facing Mass Customization
Application and research on the technologies of the design for mass customization

Han-zhong MAO,Guo-ning QI,Qiao-xiang GU

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.11.026

2007-01-01

Abstract:Utilising the rotor and cylinder of the steam turbine as examples,the key technologies of design for mass customisation(DFMC) were researched,which are modularisation,product master model,product master structure and configuration design.Out of the research,an applied system of design for mass customisation was assembled.The system consists of several modules,including the system integrated Smart Team PDM,with a coding module and tabular layouts of article characteristics module(both developed by the research team).The system can be used to construct the product master module and product master structure.According to that,it can provide facilities for designing customisation products that satisfy individual customers' needs,and has been applied in the design of the steam turbine.
Modular Shipbuilding Technology under Mass Customization

Wei DONG,Hong ZHAO,Wei WANG

DOI: https://doi.org/10.3969/j.issn.1001-9855.2012.05.017

2012-01-01

Abstract:This paper describes the technology of modularization shipbuilding corresponding to the trend of mass customization of ship products.It introduces the characteristics and common procedures of modularization design in detail,and summarizes the application of modularization shipbuilding in China.
Study on mass customization and its model

Guoming Qi,Xinjian Gu,Renwang Li

2000-01-01

Abstract:Mass customization (MC) is 21st century-oriented production mode. The problem to be resolved in MC is how to deal with dilemma, i.e. the product must satisfy the individual demands of customer while the cost and delivery time of the customized product are similar to that of the product in mass production. The backgrounds of MC were expounded and MC-oriented integration product-process model was proposed. A kind of mathematical model of MC was established preliminarily.
Research On Enterprise Management Information System For Mass Customization

Xs Xu,Xj Gu

2005-01-01

Abstract:Mass Customization (MC) is essentially that manufacturers and customers cooperate either to design or to assemble a customized product or service through flexible processes. It is becoming one of the main production models in the 21(st) century. Compared with traditional mass production, mass customization involves in a large amount of information and need a mechanism to manage and control information flow among the collaborative business units. This article, based on mechanical manufacturing, analyzes the information management requirement in mass custornization and presents the design and implementation of an enterprise management information system for mass custornization (MCEMIS). An object-oriented system model is established to support the system integration. A prototype system which consists of three modules is developed to allow customers to interact conveniently with manufacturers and support mass custornization production of manufacturer. It makes enterprise keep a good relationship with customers and escalates the enterprise's product development and management level as well as competition ability.
The Comparison of Mass Customization and Agile Manufacturing

Min LI,Fu-yuan XU,Xin-jian GU,Ji-xi CHEN

DOI: https://doi.org/10.3969/j.issn.1005-2542.2001.01.004

2001-01-01

Abstract:Producing customized products with mass production efficiency is the dream of manufacturing for many years. Mass customization production mode and agile manufacturing model all try to produce customized products with mass production efficiency. The paper introduced the agile manufacturing mode , analyzed the characteristics of mass customization mode, and compared the similarities and differences of the two modes. Problems on how to develop mass customizatioin and agile manufacturing in our country were discussed in the end.
Applied Research on Technologies of Design for Mass Customisation

Qiaoxiang Gu,Guoning Qi,Shaohui Su,Yujun Lu

DOI: https://doi.org/10.1007/0-387-34403-9_146

2006-01-01

Abstract:Utilizing the rotor and cylinder of the steam turbine as examples, the key technologies of design for mass customization (DFMC) have been researched. Out of this research, an applied system of design for mass customisation has been assembled. This system consists of several modules, including the system integrated Smart Team PDM, with a coding module and tabular layouts of article characteristics module (both developed by the research team), and Solid Edge CAD software. The system provides facilities for designing customisation products that satisfy individual customers' needs, and has been applied in the design of the steam turbine.

Research on the NC Program for Mass Customization

Research on NC Program Desidn for Mass Customization

Nc Programming System For Mass Customization

Numerical Control Programming Oriented to Customized Product

Study on Mass Customization Production and Its Application Method

Study on Implementation Method of Mass Customization Based on its Extenics Model

Master NC Program Design for Variant Parts

Study on System Optimization Method for the Actualization of Mass Customization

An Integrated Manufacturing System for Mass Customization

Study on Mass Customization and Its Actualization

Quantitative Analysis Method of Mass Customization

Research and implementation of quality control oriented to mass customization

Study on the Product Design for Mass Customization

Research and development on collaborative product design tools for mass customization

Reconfigurable Automation Manufacturing Equipment Facing Mass Customization

Application and research on the technologies of the design for mass customization

Modular Shipbuilding Technology under Mass Customization

Study on mass customization and its model

Research On Enterprise Management Information System For Mass Customization

The Comparison of Mass Customization and Agile Manufacturing

Applied Research on Technologies of Design for Mass Customisation