Abstract:The membrane extraction of copper ions was carried out using hydrophobic poly(propylene) (PP) hollow fiber membrane modules and kerosene solutions containing organic extractant. The influences of different extractant on the extraction yield, mass transfer performance and mass transfer mechanism were studied. Compared with 2-ethylhexyl phosphoric acid (2EHPA) and 2-methyl-5-sulpho benzaldoxime (2M5SB), di-(2-ethylhexyl)phosphoric acid (D2EHPA) extractant system with high distribution coefficient exhibited higher extraction yield of 99.7%. The extraction equilibrium time, the final extraction yield and the total mass transfer coefficient were independent of the flow rates of two phases. The extraction equilibrium time and the final extraction yield at different flow rates of two phases were 80 min and near 99.5%, respectively. A mass transfer model of a complexation reaction describing the overall mass transfer resistance was controlled by interfacial reactions rather than the aqueous and organic boundary layer which could explain the effect of flow rate on the final extraction yield and the total mass transfer coefficient. This model showed that the mass transfer resistance and mass transfer coefficient were independent Of Cu2+ when copper ion concentration was more than 0.06 g/L. However, when copper concentration was less than 0.06 g/l, the mass transfer resistance increased as Cu2+ concentration decreased, and the mass transfer coefficient decreased as Cu2+ concentration decreased. Extractant entrainment in the aqueous phase and membrane fouling were investigated primarily. It was found that the solvent entrainment could reduce to 10ppm much lower than 200ppm of the classic liquid-liquid extraction, and that the cleaning of contaminated membranes was not complete. However, it can be still concluded from this research that the membrane extraction in PP hollow fibre with D2EHPA extractant would be an effective and promising processing means for Cu2+ separation from aqueous solution. Copyright (c) 2005 John Wiley & Sons, Ltd.

A Novel Extraction Process: Membrane Dispersion Extraction

Extraction process - Membrane dispersion extraction

A novel membrane dispersion micro-extractor

Polydopamine-CaCO3 Modified Superhydrophilic Nanocomposite Membrane Used for Highly Efficient Separation of Oil-in-water Emulsions

A Ceramic Microfiltration Tube Membrane Dispersion Extractor

Supercritical Carbon Dioxide Extraction in Membrane Formation by Thermally Induced Phase Separation

Disc Ceramic Membrane Modified with Nano-Tio2 for Separating Oil-Water Emulsion under Dynamic Membrane Filtration

PREPARATION OF EXTRACTANT MICROCAPSULES BY SOLVENT EVAPORATION METHOD

Efficient Removal of Dissolved Tributyl Phosphate from Nitric Acid Solution by a Membrane Dispersion Micro Extractor

A novel demulsification technique by microporous membrane filtration

MASS TRANSFER CHARACTERISTICS WITH CERAMIC MACROPOROUS MEMBRANE AS DISPERSION MEDIUM

Mass transfer performance and two-phase flow characteristic in membrane dispersion mini-extractor

A fundamental study on demulsification process by microfiltration membrane

Recovery Of Petroleum Ether From Solanesol Extracting Solution Through Vacuum Hydrophilic Membrane Distillation

A Basic Study on Micropore Membrane Emulsification

Study on the Applications of Membrane Extraction

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

Mass transfer characteristics of fiber membrane extraction module

Mass transfer improvement in membrane extraction by coiled hollow- fibre membrane

Mechanism of Coalescence Demulsification with Microfiltration Membrane

Research on Removal of Sulfanilic Acid from Water with Membrane Extraction