High-precision calibration and measurement method based on stereo vision
Yingqiao KONG,Jiankang ZHAO,Xuan XIA
DOI: https://doi.org/10.11772/j.issn.1001-9081.2017.06.1798
2017-01-01
Journal of Computer Applications
Abstract:In stereo vision measurement system,the distortion caused by the optical system makes imaging of target deviate from the theoretical imaging point,which results in measurement error of system.In order to improve the accuracy of the measuring system,a new measurement method based on stereo vision was proposed.Firstly,a quartic polynomial on the whole imaging plane was fitted through the pixel resolution of each angular point on the calibration board,the coefficient of the fitted polynomial was proportional to the distance from the object to the camera.Then,the longitudinal distance of the detected object was measured by using the measuring distance principle of binocular model.Finally,based on the obtained polynomial,the monocular camera was used to measure the transverse dimension of the detected object.The experimental results show that,when the distance between the object and the camera is within 5 m,the longitudinal distance error of the proposed method can be reduced to less than 5％.And when the object is 1 m away from the camera,the measurement error of transverse width of the proposed method is within 0.5 mm,which approaches to the theoretical highest resolution.