Abstract:Solid solutions of ceramic pigments of red shade have been synthesized based on YAlO3 perovskite structure doped with chromium by means of conventional synthesis; that is, the “ceramic route”. To optimize this synthesis, an emphasis has been made on the study of stoichiometry, calcination conditions and mineralizer incorporation. Various studies have demonstrated the high stability of perovskite structures, which ensures stable coloration at high temperatures. This is a highly important factor in the ceramic sector, given the scarcity of red glazes functional at temperatures close to those required of porcelain stoneware and their environmental constraints. Such a limitation makes it impossible in the European community to manufacture using toxic materials such as Se and Cd (cadmium sulfoselenide) that offer interesting colors at low temperatures. Pigments have been synthesized within the Y1−xCrxAlO3, YCrxAl1−xO3 and Y1−xAl1−yCrx+yO3 chromium-doped systems in molar ratios between n = 0.01 molar and n = 0.10 molar. The pigments obtained have been characterized by X-ray diffraction to identify the crystalline phases responsible for the shade; that is, the formation of the perovskite crystalline structure YAlO3 responsible for the red shade, together with lateral phases of garnet Y3Al5O12 of lower intensity. Visible ultraviolet spectrophotometry shows absorption bands corresponding to Cr(III) in octahedral position and the appearance of Cr(IV) in both octahedral and tetrahedral positions. The morphology of the samples was studied using a scanning electron microscope, obtaining information from the secondary and back scattered electrons. The viability of its use in ceramic glazes was verified after applying them mixed at 4% by weight in a glaze to an industrial porous single-firing cycle, collecting the L*a*b* chromatic coordinates using a visible ultraviolet spectrophotometer based on the CIE L*a*b* system, giving rise to red colorations.

STUDY ON THE NON-POLLUTION RED GLAZE OF CADMIUM-SELENIUM FOR STONEWARE

Maximization of the Blue-White Contrast of Ancient Porcelain Decorations from Jingdezhen Imperial Kiln by Co-spinel Formation

A Study on Rare Earth Ceramics Glaze

Development of Red Ceramic Pigments with Perovskite Structure Prepared through a Traditional Route

Changsha ware glaze color: Composition, nanostructure, and copper and iron speciation

New environmentally friendly substance formulation based on steel slag for the manufacture of stoneware

Synthesis and Coloring Mechanism of Metallic Glaze in R2O-RO-Al2O3-SiO2-P2O5 System

Study on Environment-Fridenly Leadless Flux for Overglaze Colorswith Low Bismuth Content

Study on glass-ceramic prepared by zinc leaching residue and solidification mechanism of heavy metals

Preparation of a highly color-saturated amorphous photonic crystal structural color glaze by imitating the multilayered structure of Jun porcelain

Study on Leadless and Cadmiumless Fluxing Agent for Overglaze Colors

A zirconium-free glaze system for sanitary ceramics with SiO2-CaCO3-TiO2 composite opacifier containing anatase: Effect of interface combination among SiO2, CaCO3 and TiO2

Sol–gel glazes - a safe glass and ceramics coloring approach

Glass-ceramics synthesis using the collaborative smelting slag of spent automotive catalyst and copper-bearing electroplating sludge

Preparation of Glass-ceramics Using Chromium-containing Stainless Steel Slag: Crystal Structure and Solidification of Heavy Metal Chromium

Lead glass-ceramics produced from the beneficial use of waterworks sludge.

Nano-silver induced ceramic coloring via control of glaze interface and phase separation

Study on the coloring mechanism of the Ru celadon glaze in the Northern Song Dynasty

The Review of Glass Frit Compositions for Glazing

RESEARCH ON THE EFFECT OF STABILIZING AGENTS ON THE PERFORMANCES OF GREEN LEADLESS AND CADMIUMLESS FLUXING AGENTS FOR OVERGLAZE COLORS

The Coloring Mechanism of Opaque Glazes from the Changsha Kiln of the Tang Dynasty