Abstract:This work focuses on continuously operated spray granulation processes in horizontal fluidized beds highlighting the influence of process conditions on the particle properties of the resulting product granules. The drying process has a decisive influence on the kinetics of the growth rate and thus also on the properties of the particles, such as the morphological structure, particle moisture content and porosity as well as density, compression strength and the wetting behavior. This influence has been considered in this study in more detail on the basis of the model material sodium benzoate. In order to compare the produced granules at different drying conditions and spray rates of the suspension an external product classification was used to achieve a certain product granule size. The obtained experimental results show a deep influence of the thermal conditions onto granule morphology and structural properties, which is in qualitative agreement with recent experimental observations (Rieck et al., 2015; Hoffmann et al., 2015a; Schmidt et al., 2017b). The overall trend of the results reveal smoother product granules with decreasing spray rates of the suspension and increasing drying temperatures. These smoother surface morphologies lead to a more homogeneous layering which has as a consequence that the internal particle porosity is decreasing while the solids density and the compression strength of the particles are increasing at the same time. In this study the purely qualitative classification of the surface texture from previous experimental studies was extended by the topographic analysis of the product granules, giving the possibility to quantify the morphological structure by means of roughness measurements. This makes the morphological design accessible as product property and permits the utilization of models that describe the morphology according to the process conditions.

Optimization of Xueli Granules by Spray Drying Process

Optimization of the Extraction Process of Youtangming Granules by Orthogonal Design

Study on Extraction Procession of Gandujing Granules with Orthogonal Design

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Optimization for the Ethanol Precipitation Process of Botanical Injection: Indicator Selection and Factor Influences

Study on the molding process and quality standard of Qizhi Yifei granules

Mathematical model and numerical investigation of the influence of spray drying parameters on granule sizes of mold powder

Study on Quality Standards of Xiao'er Changweikang Granules

[Study on Balance of Process of Alcohol Precipitation of Ganmaoling Granules].

Unit Operation Optimization for the Manufacturing of Botanical Injections Using a Design Space Approach: a Case Study of Water Precipitation.

Moulding Process of Zhiyan Granules

Quality Evaluation of Panax Notoginseng Extract Dried by Different Drying Methods

Optimization of preparation technique for the Qiyuejiangzhi tablets

Optimization of Volatile Oils Extraction from Fuben Zengmai Granules

Optimization of Spray Drying Process of Coptidis Rhizoma Extract by Orthogonal Test

Determination of Critical Influencing Factor on Ph Stability of Yuxingcao Injection

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Optimization of membrane dispersion ethanol precipitation process with a set of temperature control improved equipment.

Systematic optimization of spray drying for YAG transparent ceramics

Optimal Extraction of Dingxiang Jiangqi Granules