Abstract:Multiphase pump is a cost-effective option for subsea gas and oil fields development. The ability of handling different gas volume fractions with high rotational speed is necessary to optimize the operating performance of a multiphase pump. Thus meeting the demand for increasing gas and oil production of undersea wells especially for those brownfields. This study aims to validate the performance of a three-stage helico-axial multiphase pump with new designed impellers and high rotational speed in both single and two-phase experiments. Then establish a numerical analysis method to predict the pump performance and evaluate the characteristics of multiphase flow with high reliability by using commercial CFD packages. The design volume flowrate of the pump is 100 m(3)/h and rotational speed is 4500 rpm. The experiment results show that the highest efficiency is 45% in water condition at the design parameters. There is not much difference on the pump performance at low inlet gas volume fractions (GVF) such as 5% and 10%, which indicates that multi-stage pump can prevent large performance degradation at low inlet GVFs. Numerical simulations are implemented by solving the three-dimensional steady Reynolds-Averaged Navier-Stokes (RANS) equations. The effects of various turbulence models, wall roughness, gas bubble sizes and interphase drag models on the hydraulic performance of multiphase are investigated. The results show that the predicted performance with Shear Stress Transport (SST) turbulence model at the optimal conditions agree well with the experiment data. Wall roughness should be considered since it has a significant effect on pump efficiency. Gas bubble size varies according to different inlet GVFs and rotational speed. The in-situ alpha(g) is high in diffuser and it varies with different interphase drag force models. The reliability of the numerical analysis method is proven by comparing the numerical results and experiments data.

Prediction and Analysis on Mixed-Flow Thruster Performance

Numerical Simulation and Analysis of Flows in Mixed Flow Thrust

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Flow Computations of Multi-Stages by URANS and Flux Balanced Mixing Models

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Numerical Study on Transient Performance of Mixed Flow Pump During Starting Period

Numerical Simulation and Analysis on Hydraulic Performance in Vertical Canned Motor Pump

Prediction Method of Impeller Performance and Analysis of Loss Mechanism for Mixed-Flow Pump

Numerical Simulation of Three-Dimensional Flow Through Full Passage and Performance Prediction of Nuclear Reactor Coolant Pump

Experiment and Numerical Study of a New Generation Three-Stage Multiphase Pump

Computation of Unsteady Flow Fields in a Pump Using Sliding Mesh Method

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Study of Tunnel Thruster Performance and Flow by Quasi-Steady Reynolds-averaged Navier-Stokes Simulation

Influence of turbulence model on performance prediction of mixed-flow pump

Numerical Study on the Stall Behavior of a Water Jet Mixed-Flow Pump

Numerical Prediction of Multi-Stage Axial Compressor Performances

Numerical Simulation and Experimental Validation of the Flow Field in Axial Flow Pump

Performance Prediction and Flow Analysis in the Vaned Distributor of A Pump Turbine under Low Flow Rate in Pump Mode

PERFORMANCE ANAIYSIS OF INTERMEDIATE STAGE OF A MULTI-STAGE CENTRIFUGAL COMPRESSOR WITH MIXED GAS

Investigation of Tunnel Thruster Performance and Flow by Quasi-Steady and Unsteady Rans Simulations