Abstract:Earthquakes contain complex components in both the horizontal and vertical directions. However, most vibration control strategies work only in a single direction. The existing multi-dimensional isolation devices usually have complex designs and low damping ratios; hence, the stability of structures that incorporate the devices is currently insufficient. This study designs a novel multi-dimensional isolation and mitigation device based on viscoelastic damping technology (VE-MDIMD). The device consists of a core bearing and several cylindrical dampers, providing vibration control capacity in both the horizontal and vertical directions and a strong uplift resistance. To evaluate the device's performance, a series of dynamic tests are conducted on the cylindrical damper utilized in the device. The results show that the damper's mechanical properties exhibit a pronounced dependence on the frequency and amplitude, and its hysteresis curves become obviously nonlinear with increased deformation. Subsequently, to describe the behavior of the VE-MDIMD, a mechanical model is established which combines the construction of the device and the characteristics of the damper. Considering the limitations of existing models in fully capturing the nonlinear behavior of the damper, a novel multi-scale model is proposed based on the microstructure of viscoelastic material. The experimental verification confirms that the model can accurately capture the frequency and amplitude dependence, as well as the nonlinear hysteresis behavior, of the damper. Finally, the effectiveness of the VE-MDIMD is evaluated through the dynamic analysis of an actual structure. The arrangement of the device in the structure is optimized based on a multi-objective genetic algorithm available in Matlab (R2019b) and OpenSEES (Version 3.0.0). The results demonstrate the device's superiority in controlling both horizontal and vertical vibrations in the superstructure.

Composition and Mechanic Models of Damping Measuring Equipment of Viscous Dampers

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Modal Frequency and Stability of Rotor System Supported by Viscoelastic Elastomeric Dampers

Investigation of a Complete Squeeze-Film Damping Model for MEMS Devices

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Mechanical Model of a Hybrid Non-linear Viscoelastic Material Damping Device With Its Verifications

Design Method of Viscous Dampers in Shaking Table Model Test

Mechanical model and structural control performance of a new rotation-magnified viscoelastic damper

A time-domain method for free vibration responses of an equivalent viscous damped system based on a complex damping model

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

Mechanical Modeling of Viscous Fluid Damper with Temperature and Pressure Coupling Effects

Studies on dissipative characteristics and equivalent model of particle damper in railway application

Cyclic response and mechanical model of a rotational viscoelastic damper

Test, Modeling, and Vibration Control of a Novel Viscoelastic Multi-Dimensional Earthquake Isolation and Mitigation Device

Damping Characteristics of a Novel Bellows Viscous Damper

Design, Modeling, and Vibration Control of a Damper Based on Magnetorheological Fluid and Elastomer

Design of magnetic fluid damping experimental platform and experimental analysis

Study on Experiment and Modeling of Viscoelastic Damper Considering Interfacial Effect of Matrix Rubber/Carbon Black

Design Methods of Constrained Damping Specimen Used in Measurement of Viscoelastic Damping Material’s Mechanics Parameters