Abstract:We conducted a study to investigate the impact of the laser direct metal deposition (LMD) process on the microstructure, mechanical properties, temperature fields, and stress fields of 24CrNiMo steel in order to determine the optimal process parameters. The optimal parameters were determined to be a laser power of 1400 W, scanning speed of 7 mm/s, and powder feed rate of 8 g/min. When these optimal parameters were used, the formed specimens exhibited a high densely of up to 97.5 %. The microstructure of the specimens formed different parameters primarily consisted of bainite, martensite and ferrite. The specimens formed under various process conditions demonstrated good toughness, with a maximum tensile strength of 1131±20 MPa and an elongation of 16±1.8 %. Additionally, there was little difference in wear resistance and wear morphology among the specimens formed under different processes. The predominant wear mechanisms include abrasive wear, adhesive wearand oxidative wear. Increasing laser power and decreasing scanning speed resulted in a gradual increase in the temperature gradient gradually, leading to higher residual stresses in the formed specimens. Longitudinal stresses concentrated on both sides of the deposited layer, while the transverse stresses concentrated on one side of the deposited layer. The simulation results of the temperature field and stress field were consistent with the experimental results, with errors within the range of 10 %–20 %. This study demonstrated that the simulated models of temperature and stress fields effectively captured the fundamental phenomena in the LMD process, providing valuable tools for predicting and optimizing temperature distribution and stress in the LMD process. These findings contribute to the understanding and enhancement of the LMD process for 24CrNiMo steel, making it applicable for various applications requiring superior microstructure and mechanical properties.

Effect of Local Laser Heat Treatment on Formability of DP1180 Dual-phase Steel

The effects of laser-assisted heat treatment on warm formability of dual-phase materials

Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels

Effect of Laser Heat Treatment on Bending Property of Laser Welded Joints of Low-Alloy Ultra-High Strength Steel

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Microstructure and fracture behavior of laser welded joints of DP steels with different heat inputs

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

Local laser softening of press-hardened steel at high feed rates

Experimental and Numerical Study on Local Mechanical Properties and Failure Analysis of Laser Welded Dp980 Steels

Effect of laser direct metal deposition process on the microstructure and mechanical properties and temperature and stress fields of 24CrNiMo

Effect of Different Heat Treatment Processes on Microstructures and Mechanical Properties of DP Steels

Temperature Field Simulation and Mechanical Properties of Laser Welded Dp980 Steel Joints

Modeling of Temperature Field and Pool Formation During Linear Laser Welding of DP1000 Steel

On the use of thermomechanical processing to enhance the strength-ductility-toughness balance of plain low-carbon steel

Investigation of Two Laser Heat Treatment Strategies for Local Softening of a Sheet in Age-Hardening Aluminum Alloy by Means of Physical Simulation

Laser-Assisted Robotic Roller Forming of Ultrahigh-Strength Steel QP1180 with High Precision

Map of surface hardening of the DP600 steel using the Yb:fiber laser, and force spectroscopy characterization

Local laser softening of high-strength steel with an adapted intensity

Effects of Laser Scanning Strategy on Bending Behavior and Microstructure of DP980 Steel

Influence of Post-Weld Heat Treatment on Microstructural and Mechanical Properties of Dual-Phase Steel Gas Metal Arc-Welded Joints

Effect of distribution status of the spot matrix on tensile behavior for 42CrMoV when conducting discrete laser surface strengthening: Based on experiment and simulation