Abstract:Magnesium‐lithium (MgLi) alloys have been widely used in various engineering fields due to their ultra-light characteristics. The strengthening of MgLi alloys is one of the key factors determining its application and has received extensive attention. In this work, the as-cast ultralight and high strength Mg-10Li-3Al-3Zn-xY (x = 0, 0.5 and 1.0, wt%) alloys with a density of only 1.52 g/cm3 were prepared via vacuum induction melting. The effects of rare earth element yttrium (Y) on the microstructure and mechanical properties of the MgLi alloy system were investigated. The results indicated that the microstructures of all the alloys mainly consisted of α-Mg, β-Li, AlLi, and MgLi2Al phases. The spherical AlLi phase was distributed inside the α-Mg and β-Li matrix. Part of the petal-like MgLi2Al phase was distributed in the interior of β-Li, and the rest grew along the grain boundaries as long strips. With the addition of Y, Al2Y phase formed with sharp edges and regular shapes. The Al2Y phase was mainly distributed inside the α-Mg phase and along the grain boundaries. Meanwhile, the amount of AlLi phase inside the α-Mg phase gradually decreased. The presence of nano-scale lath-shape MgLiZn phase in the β-Li matrix was observed in the HAADF map of the 0.5Y alloy. The continuous growth of MgLi2Al phase at the grain boundaries weakened its strength. As a consequence, it eventually led to intergranular fracture of the alloy. The 0.5Y alloy showed the highest tensile strength, up to ~244 MPa, and the yield strength was 60.5% higher than that of the 0Y alloy. Solid solution strengthening, precipitate strengthening and grain refinement were thus considered as the primary strengthening mechanisms caused by the addition of Y into the Mg-10Li-3Al-3Zn alloy.

Study Status of Mg-Li System Alloys

Strengthening-toughening Methods and Mechanisms of Mg-Li Alloy:A Review

Research on Properties of Mg-Li Alloys

Strengthening-toughening methods and mechanisms of Mg–Li alloy: a review

Study on Strengthening and Toughening of Mechanical Properties of Mg-Li Alloy by Adding Non-Rare-Earth Elements Al and Si

Influence of Al-Si eutectic alloy on the mechanical behaviors and microstructure feature of ultralight dual-phase Mg-8Li-x(Al-12.6 Si) alloys

Research Status and Prospects of Mg-Al-Mn Magnesium Alloy

Microstructures and Mechanical Properties of Ultralight Cast Al-3Li-XMg-0.1Zr Alloys

Research Progress of Mg-Re Alloys

Effect of Li Content on Microstructure and Mechanical Property of Mg−xLi−3(Al−Si) Alloys

Study on the microstructure and mechanical properties of Mg–Al–Li–Zn–Ti multi-component alloy

Development of Advanced Aluminum and Magnesium Alloys: Microstructure, Mechanical Properties and Processing

Microstructure and Mechanical Properties of As-Cast and Extruded Mg–8Li–3Al–2Zn–0.5Nd Alloy

Mechanical properties and microstructure of Mg-Al-Zn-Si-base alloy : Special issue on platform science and technology for advanced magnesium alloys, II

Microstructure and mechanical properties of as-cast ultralight and high strength Mg-10Li-3Al-3Zn-xY alloy with multi-precipitates

Structure And Mechanical Properties Of Mg-Zn-Re System Alloys

Role of alloying and heat treatment on microstructure and mechanical properties of cast Al-Li alloys: A review

Research Progress in Mg-Based Alloys Reinforced by Long-period Ordered Structure

Comprehensive Study on the Differences in Microstructure and Mechanical Properties of Mg-Li Alloy Fabricated by Additive Manufacturing, Casting, and Rolling

Investigations of High-Strength Mg-Al-Ca-Mn Alloys with a Broad Range of Ca+Al Contents

A Review on Mg-RE Alloys with High Product of Strength and Elongation