Abstract:As one of the core components of gas turbines, the combustion system operates in a high-temperature and high-pressure adverse environment, which makes it extremely prone to faults and catastrophic accidents. Therefore, it is necessary to monitor the combustion system to detect in a timely way whether its performance has deteriorated, to improve the safety and economy of gas turbine operation. However, the combustor outlet temperature is so high that conventional sensors cannot work in such a harsh environment for a long time. In practical application, temperature thermocouples distributed at the turbine outlet are used to monitor the exhaust gas temperature (EGT) to indirectly monitor the performance of the combustion system, but, the EGT is not only affected by faults but also influenced by many interference factors, such as ambient conditions, operating conditions, rotation and mixing of uneven hot gas, performance degradation of compressor, etc., which will reduce the sensitivity and reliability of fault detection. For this reason, many scholars have devoted themselves to the research of combustion system fault detection and proposed many excellent methods. However, few studies have compared these methods. This paper will introduce the main methods of combustion system fault detection and select current mainstream methods for analysis. And a circumferential temperature distribution model of gas turbine is established to simulate the EGT profile when a fault is coupled with interference factors, then use the simulation data to compare the detection results of selected methods. Besides, the comparison results are verified by the actual operation data of a gas turbine. Finally, through comparative research and mechanism analysis, the study points out a more suitable method for gas turbine combustion system fault detection and proposes possible development directions.

ANALYSIS AND STUDY ON THE FAULT DIAGNOSIS METHOD OF VACUUM IN CONDENSOR FOR STEAM TURBINE UNIT

Study on Fault Diagnosis of Condenser Based on BP Neural Network

Intelligent Fault Diagnosis of Large Vacuum System

Analysis of Superheater’s Pipe Wall Overtemperature by Fault Tree Diagnose

Condenser On-line Status Monitoring and Fault Diagnosis System Based on Intelligent Case-based Reasoning Technique

Study on Fault Diagnosis of Steam Turbine Flow Path Components

Running Optimization and Fault Diagnosis System for Turbine Cold Junction System

Analysis on Mechanism and Characteristic of Vibration Fault on New Large Capacity Synchronous Condenser

Algorithm and Experimental Validation for Condition Monitoring,fault Detection for Gas Turbine Engine

Application of Steam Turbine On-line Condition Monitoring and Failure Diagnosis Systems

Investigation on Typical Fault Pattern of the Halving-style Condenser and Its Fault Diagnosis with BP Neural Network

Research Overview and Prospects of Fault Diagnosis Technique of Steam Turbine Flow Passage

ESTABLISHMENT OF KNOWLEDGE BASE FOR DIAGNOSTIC EXPERT SYSTEM OF CONDENSER'S PERFORMANCE IN THERMAL POWER PLANT

Process Monitoring and Fault Diagnosis of Condenser Using KPCA and PSVM

ANALYSIS OF AFFECTING FACTORS AND WEIGHING CALCULATION FOR VACUUM REDUCTION IN CONDENSER BASED ON FUZZY ANALYTIC HIERARCHY PROCESS

MODEL FOR DIAGNOSING FAULT SORTS OF THE CONDENSER SYSTEM BASED ON FUZZY NEURAL NETWORKS

Fault Diagnosis of Steam Turbine Vibration Based on Fault Tree Analysis

Study of the methods for diagnosing vibration faults of steam turbine units based on the clustering analysis and weighted fuzzy logic

Intelligent Fault Diagnosis of Gas Turbine Based on Thermal Parameters

A Comparative Study on Fault Detection Methods for Gas Turbine Combustion Systems

Hybrid Intelligent Diagnostic Method for Large Steam Turbine Generator Sets