Abstract:Due to the high theoretical specific capacity and low cost of Sn, developing Sn‐based anode materials with long life is the key to their practical applications in lithium ion batteries (LIBs). Herein, novel hierarchically porous NiSn alloys with interconnected ligament‐channel networks were synthesized via a two‐step dealloying strategy, involving corrosion of an Al97.5Ni2Sn0.5 precursor in NaOH, followed by partially etching Ni in HNO3. The architecture of the obtained NiSn‐3h alloy contains the ligaments with the scale of about 115.2 nm and nanowalls with a thickness of several nanometers on the ligament surface, which can enhance the electron/ion transport kinetics and improve the tolerance to volume variation. The NiSn‐3h electrode exhibits superior Li storage performance in terms of satisfactory rate performance and excellent cycling stability with a reversible capacity of 213.9 mAh g‐1 at 1 A g‐1 after 1000 cycles. More importantly, the Li storage mechanism of NiSn‐3h was unveiled by operando X‐ray diffraction, revealing the formation of lithiation products with low crystallinity at the end of discharge. Additionally, on‐line differential electrochemical mass spectroscopy was used to detect the gas evolution of the NiSn‐3h electrode during the discharge‐charge processes. This article is protected by copyright. All rights reserved.

Study of Sn-Ni alloy as negative electrode for lithium-ion batteries

Effect of Li Atom Infiltration by the Way of Electro-Osmosis on Electrochemical Properties of Amorphous Mg65Ni27La8 Alloy Used As Negative Electrode Materials for the Nickel–metal Hydride Secondary Batteries

Flake Cu-Sn Alloys as Negative Electrode Materials for Rechargeable Lithium Batteries

Co-Sn Alloys As Negative Electrode Materials for Rechargeable Lithium Batteries

High-performance Sn–Ni Alloy Nanorod Electrodes Prepared by Electrodeposition for Lithium Ion Rechargeable Batteries

Influences of annealing treatment on electrochemical properties of La-Mg-Ni-Co hydrogen storage alloy

New V-Sn Alloys Prepared by Powder Metallurgy for Lithium Battery Negative Electrode.

Influence of Material Processing on Crystallographic and Electrochemical Properties of Cobalt-Free LaNi 4.95 Sn 0.3 Hydrogen Storage Alloy

Influence of Annealing Treatment on Microstructure and Cycling Stability of La-Rich Ml(Nicomnal)(5) Alloy Electrode for Ni/Mh Batteries

Fabrication of Sn-Ni Alloy Film Anode for Li-ion Batteries by Electrochemical Deposition

Preparation and property of nanometer Cu-Sn alloy anode material for lithium-ion batteries

Preparation of Ni3Sn2 Alloy Negative Electrode for Lithium-Ion Batteries by Electro-Deoxidization in Molten Salt

Two‐step dealloying approach to synthesize hierarchically porous nickel‐tin alloy towards long‐life lithium ion batteries

Co-Doped CoxCu6-xSn5 Alloys As Negative Electrode Materials for Rechargeable Lithium Batteries.

Lithium Insertion Properties of Electrodeposited Sn - Ni Alloy Electrode in Lithium-Ion Battery

Electroless Cu-plated Ni3Sn4 alloy used as anode material for lithium ion battery

Facile synthesis and electrochemical characterization of Sn 4Ni 3/C nanocomposites as anode materials for lithium ion batteries

Single-Crystal Intermetallic M-Sn (M = Fe, Cu, Co, Ni) Nanospheres As Negative Electrodes for Lithium-Ion Batteries

Influence of the preparation conditions on the morphology and electrochemical performance of nano-sized Cu–Sn alloy anodes

Electrochemical Properties of SnSb-Mo Alloys Prepared by Mechanical Alloying for Li-ion Batteries

La–Mg–Ni ternary hydrogen storage alloys with Ce2Ni7-type and Gd2Co7-type structure as negative electrodes for Ni/Mh batteries