Abstract:A high-power linearly-polarized all-fiber single-frequency amplifier at 1 µm based on tandem core-pumping is demonstrated by using a large-mode-area Ytterbium-doped fiber with a core diameter of 20 µm, which nicely balances the stimulated Brillouin scattering effect, thermal load, and output beam quality. A maximum output power of more than 250 W with a corresponding slope efficiency of >85% is achieved at the operating wavelength of 1064 nm without being constrained by the saturation and nonlinear effects. Meanwhile, a comparable amplification performance is realized with a lower injection signal power of the wavelength near the peak gain of the Yb-doped fiber. The polarization extinction ratio and the M2 factor of the amplifier are respectively measured to be >17 dB and 1.15 under the maximal output power. In addition, by virtue of the single-mode 1018 nm pump laser, the intensity noise of the amplifier under maximal output power is measured to be comparable to that of the single-frequency seed laser at frequencies higher than 2 kHz, except for the emergence of parasitic peaks that can be eliminated by optimizing the driving electronics of the pump lasers, while the deterioration of the amplification process to the frequency noise and linewidth of the laser is negligible. To the best of our knowledge, this is the highest output power of a single-frequency all-fiber amplifier based on the core-pumping scheme.

Experimental Investigation on Spectral Linewidth and Relative Intensity Noise of High-Power Single-Frequency Polarization-Maintained Thulium-Doped Fiber Amplifier

3.25 Kw All-Fiberized And Polarization-Maintained Yb-Doped Amplifier With A 20 Ghz Linewidth And Near-Diffraction-Limited Beam Quality

High Power Narrow-Linewidth Linearly Polarized Nanosecond All-Fiber Amplifier with Near-Diffraction-Limited Beam Quality

414 W Near-Diffraction-limited All-Fiberized Single-Frequency Polarization-Maintained Fiber Amplifier.

325 kW all-fiberized and polarization-maintained Yb-doped amplifier with a 20 GHz linewidth and near-diffraction-limited beam quality

560 W All Fiber and Polarization-Maintaining Amplifier with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

316 W High-Brightness Narrow-Linewidth Linearly-Polarized All-Fiber Single-Frequency Laser at 1950 Nm

3.2-Kw 9.7-Ghz Polarization-maintaining Narrow-linewidth All-fiber Amplifier

Kilowatt-level, Mode-Instability-free, All-Fiber and Polarization-Maintained Amplifier with Spectral Linewidth of 1.8 GHz

A 3.2 Kw Single Stage Narrow Linewidth Fiber Amplifier Emitting at 1050 Nm

189 Kw All-Fiberized and Polarization-Maintained Amplifiers with Narrow Linewidth and Near-Diffraction-limited Beam Quality

High power, narrow linewidth all-fiber amplifiers

Spectral Broadening in Narrow Linewidth, Continuous-Wave High Power Fiber Amplifiers

Over 250 W Low Noise Core-Pumped Single-Frequency All-Fiber Amplifier

1.89 kW all-fiberized and polarization-maintained amplifiers with narrow linewidth and near-diffraction-limited beam quality.

Comprehensive Investigation on the Power Scaling of a Tapered Yb-doped Fiber-Based Monolithic Linearly Polarized High-Peak-power Near-Transform-limited Nanosecond Fiber Laser.

Linearly Polarized Fiber Amplifier with Narrow Linewidth of 5 Kw Exhibiting a Record Output Power and Near-Diffraction-limited Beam Quality.

High Power Polarization-Maintaining Master Oscillator Power Amplifier Fiber Laser in All-Fiber Format

High Power Narrow-Linewidth Fiber Laser Based on Double-Tapered Fiber

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

7.3-W Single-Frequency Master-Oscillator Fiber Power Amplifier with China-Made Double-Clad Fiber